Just found my first Weber this afternoon; will see if I can post a photo from the CL ad. Will be cleaning it up and thinking about modifications -- suggestions very much welcome. (//)
(http://i446.photobucket.com/albums/qq181/machembree/Mobile%20Uploads/2015-10/B8D1E61C-430D-42DF-B5BA-796FAAB15E87_zpsyqwhka3r.jpg) (http://s446.photobucket.com/user/machembree/media/Mobile%20Uploads/2015-10/B8D1E61C-430D-42DF-B5BA-796FAAB15E87_zpsyqwhka3r.jpg.html)
Try uploading to photobucket. Congrats on your new kettle. There will be more to come.
Thanks -- you are probably right about that. I did try the photobucket route, using their iphone app. I can upload the photo there, but can't figure out how/where to attach the photobucket upload into my post here. I've tried to read about how to do it in posts here (and I know you can't do it via Quick Reply), but can't seem to locate the necessary buttons on the new post page as I'm writing it. I will persevere.
Bring the pic up after upload. Click the i in a circle. Copy the img link and paste in your response here.
Well I see what you mean now! -- thank you! Somehow it got into one of my earlier posts above here, but all good. So that's my new love! I'll hope to figure out it's vintage and how to get it looking presentable again. Can't wait!
Nice find!
To find out its vintage, there is a two letter date code on the top vent. The is an age guide accessible from the banner. I don't know too much about the performers but there is also some historical information about them on the home page.
Nice. I made the same mistake when I found mine. That's not a performer. It's an even more elusive One Touch Platinum. Very nice sir.
As far as upgrades, let
@zavod44 help you out with a wood handle, some lid rollers and a vent tab.
(http://i1222.photobucket.com/albums/dd487/sickofcichlids/489E0DFB-B989-4A69-9A77-A78DB27BED7D.jpg) (http://s1222.photobucket.com/user/sickofcichlids/media/489E0DFB-B989-4A69-9A77-A78DB27BED7D.jpg.html)
For how old it is at the top of the page is a link that says "Age guide" click on it and it will have all of the vent codes listed, the vent code on your Grill is on the top vent on the lid and it will have one or two letters such as K or DA.
So you know that your Grill is actually a Platinum and not a Performer, it still is a great grill for sure I have two one is my dedicated Rotisserie set up. I see I'm slow on the draw!
(http://i1048.photobucket.com/albums/s368/1911Ron/Grills/Kettles/056_zpsyuqu7bw4.jpg)
Thank you ! I'd read about the codes here awhile back but forgot about it -- thanks! I've got "DA" so it's 2001 (or at least the lid is!). I dont think I'm real clear on the differences between Platinum and Perfotrmer models -- thanks for telling me so I can find out! And I'm definitely going to out-check those wood handles, rollers, and tabs; thanks for providing the lead on
@zavod44.
I did notice that the frame seemed shorter than the Performers I'd previously seen, but the table top itself seems big enough. Eventually I will find my SS Performer, but this will serve until then. It has a hairline crack in the table but still seems sturdy. I would like to replace the table top with a wooden one, or ?
Quote from: micky on October 08, 2015, 05:39:40 PM
I did notice that the frame seemed shorter than the Performers I'd previously seen, but the table top itself seems big enough. Eventually I will find my SS Performer, but this will serve until then. It has a hairline crack in the table but still seems sturdy. I would like to replace the table top with a wooden one, or ?
On one of mine the table was cracked so when I refurbed the one above I ordered the replacement from Weber it was about $60 or so I like it better than the original as they were prone to cracking. A wood table would look great I would think so something to think about eh?
Yes wood. I'm not a woodworker, but hoping to find or conjure a good easy mod that my husband can make. Thanks 1911Ron.
I've been thinking about a wood table on mine as well. Only problem, is if the grill is going to see any weather. Mine stays covered, but outside. That still allows a fair amount of moisture to get to it. I think it would warp pretty easy.
Not as much an issue if kept indoors, but would still have to be seasoned regularly.
Nice find!!!!
That's true. I'm in perenially drought-stricken Los Angeles, so moisture isn't usually a concern here. I think I'd be okay leaving it outside with a cover. But perhaps there's another non-wood mod that would work. I just don't like the plastic table top as is. It occurred to me that I might be able to use tile or get an appropriately-sized piece of cut stone (marble? granite? slate?) from one of the local stoneyards. Might be much too heavy, or maybe just wouldn't look right -- too fancypants? I do like the ease and feel of a tile or stone work surface though ...
The new style metal performer table would look slick. I think it fits. Hopefully someone that knows for sure will chime in.
@SixZeroFour maybe?
Yes it should fit on any post SS performer

I was skeptical of spending the $ to upgrade but the second you have it in hand its puts all questions to rest. Really solid upgrade to any performer!
Would new style metal table also fit on my Platinum? Sorry if that's a dumb question, but I can't find much online telling the differences between the Performer and the Platinum -- I can see the shorter frame on my Platinum but haven't seen enough Performerd on the hoof to tell what other differences there might also be.
Is the new metal table stable and sturdy?
We are talking about your platinum. :)
Yes I know ;-). But SixZeroFour said "Yes it should fit on any post SS performer," so once again I got confuzzled.
"SS performer" is a reference to the older Gas Start Performers that had the square tube frames
and a stainless steel table top also referred to as a gen 1 performer.
The history of the Performer is here http://weberkettleclub.com/grills/weber-performer-history/
And welcome to the Performer family ;)
Quote from: micky on October 09, 2015, 01:53:14 PM
Yes I know ;-). But SixZeroFour said "Yes it should fit on any post SS performer," so once again I got confuzzled.
He means any performer after the SS was retired. It should fit a platinum just fine.
Okay now I'm back to my original confusion. Didn't I learn in this very thread that mine is a Platinum, "not a Performer?" (See replies # 7 and 9 -- not naming names, but ...)
Enlighten me -- what's the relationship and differences between Performers and Platinums? This is officially A Cry For Help.
;-)
Performers have "at least" a charcoal bins. Most have a gas assist, to start the coals. The platinum that you have is a "step under", but less common. The tables are interchangeable, but the carts are very different.
You will see all the different performers here http://weberkettleclub.com/grills/weber-performer-history/ but you will not see your grill.
Quote from: micky on October 09, 2015, 05:49:54 PM
Okay now I'm back to my original confusion. Didn't I learn in this very thread that mine is a Platinum, "not a Performer?" (See replies # 7 and 9 -- not naming names, but ...)
Enlighten me -- what's the relationship and differences between Performers and Platinums? This is officially A Cry For Help.
;-)
You have a Platinum as you have noticed the Performer (post SS) are longer and have charcoal buckets plus front and rear plates.
Performer:
(http://i1048.photobucket.com/albums/s368/1911Ron/Grills/DSCF0860_zps3fd75e20.jpg)
Platinum:
(http://i1048.photobucket.com/albums/s368/1911Ron/Grills/Kettles/056_zpsyuqu7bw4.jpg)
Nice side by side Ron. And jealous of both rigs.
Quote from: TheDude on October 09, 2015, 05:54:02 PM
Performers have "at least" a charcoal bins. Most have a gas assist, to start the coals. The platinum that you have is a "step under", but less common. The tables are interchangeable, but the carts are very different.
I think you are right as the table on my Platinum has a plug in another place for different mounting points.
Okay -- thanks to you both I'm starting to get it.
My Platinum isn't anywhere near as pretty as Ron's -- a little inspiration as I start my kettle cleaning this weekend. Thanks very much!
Quote from: micky on October 09, 2015, 06:35:17 PM
Okay -- thanks to you both I'm starting to get it.
My Platinum isn't anywhere near as pretty as Ron's -- a little inspiration as I start my kettle cleaning this weekend. Thanks very much!
This is what it looked like when i bought it, i replaced table and while the table was off i removed the end pieces, cleaned the frame and end pieces and spray painted both and scrubbed the kettle and then reassembled it.
(http://i1048.photobucket.com/albums/s368/1911Ron/Grills/DABlueplat_zps6acbd670.jpg)
Sounds like a good plan for me -- thanks for the encouraging words. I tried to find the metal performer table but didn't see it on the Webercsite -- will try again when I have more time. Also hope to get a wooden handle and rollers. Also wondering if you can buy those plastic-y end pieces from weber; one section of the end piece under the kettle is partly melted!
The endcap is gonna be tough. Been discontinued for a while. Try a post in the buy/sell section here. As for the table, they are brand new this year. Probably going to have to call weber to get one.
Will do. For my WTB post, what do I call that piece so folks know what I'm looking for? It's the light-colored plastic piece spanning between, and just above, the wheels on the Platinum. But that seems a bit long-winded for a WTB header.