Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: G$ on January 25, 2013, 12:40:45 PM

Title: There should be a name for this condition
Post by: G$ on January 25, 2013, 12:40:45 PM
There should be a name for this.  How many years of dragging does it take to grind a front leg to this angle?

(http://img547.imageshack.us/img547/2252/imag0436w.jpg)
not the best picture but you get the point....
Title: Re: There should be a name for this condition
Post by: Jeff on January 25, 2013, 02:21:22 PM
Those are probably the same people the install the legs incorrectly and can't pull the grill by the handle on the bowl!
Title: Re: There should be a name for this condition
Post by: mike.stavlund on January 25, 2013, 03:03:58 PM
I picked up a Freecycle kettle this summer that had the leg ground down just like that.  And it had the leg aligned with the handle.  I guess people must move them around an awful lot!
Title: Re: There should be a name for this condition
Post by: Duke on January 25, 2013, 05:29:39 PM
Hey! I like em like that!  ;)
Title: Re: There should be a name for this condition
Post by: reillyranch on January 25, 2013, 05:50:31 PM
Duke!  Hey AJ was looking for you.

Folks who grind the legs down like that should be called "grinders" but that sounds like a sandwich.  So maybe "scrapers" because they scrape the legs.  But that is not very creative.
Title: Re: There should be a name for this condition
Post by: G$ on January 25, 2013, 07:47:37 PM
Quote from: Duke on January 25, 2013, 05:29:39 PM
Hey! I like em like that!  ;)

Then answer the question!
Title: Re: There should be a name for this condition
Post by: reillyranch on January 25, 2013, 07:55:43 PM
Drag queens?  Anglers?  Front loaders?  Peg legging? 
Title: Re: There should be a name for this condition
Post by: zavod44 on January 25, 2013, 08:40:36 PM
I have some that are so ground off, that when I try to install a white cap on there it doesn't even sit on the leg properly.  I'm voting for calling it the "dirty angle"....
Title: Re: There should be a name for this condition
Post by: 1buckie on January 25, 2013, 11:59:45 PM


"Tommy"  the stepchild of my kettle family is so ground down, he's almost 2 inches off level......

All three leg sockets wobble, not one weld is actually broken, mind you, they just wobble....


He pretty much showed up that way, lookin' all wobbly & sorta drunk lookin'.....

I just didn't say anything & just kept using him, just like he was.....a demonstration of acceptance

We'll see how long he can stand up, we'll see....... 8)
Title: Re: There should be a name for this condition
Post by: Craig on January 26, 2013, 07:35:09 AM
Funny thing is, both my '60s thunbscrew 18.5 and my '78 22.5 have the straight edge on the front leg. That being said I had to beat out the front leg on the 22.5" from the inside of the bowl with a rubber mallet to get it un-inverted. So maybe it is from dragging, maybe it was an older design. I saw a pic of an 18 'Cado on eBay last year that had the same thing too.  :-\  I like Dirty Angle!
Title: Re: There should be a name for this condition
Post by: Cookingmama on January 26, 2013, 08:30:01 AM
Quote from: 1buckie on January 25, 2013, 11:59:45 PM

.

I just didn't say anything & just kept using him, just like he was.....a demonstration of acceptance



I love that!   
Title: Re: There should be a name for this condition
Post by: Duke on January 26, 2013, 08:38:26 AM
Quote from: Cookingmama on January 26, 2013, 08:30:01 AM
Quote from: 1buckie on January 25, 2013, 11:59:45 PM

.

I just didn't say anything & just kept using him, just like he was.....a demonstration of acceptance



I love that!
Sounds like a prodigal. :)
Title: Re: There should be a name for this condition
Post by: zavod44 on January 26, 2013, 02:18:29 PM
I got a pretty bad dirty angle on my rancher too...I need a foot on it real bad...
Title: Re: There should be a name for this condition
Post by: G$ on January 26, 2013, 06:24:45 PM
Dirty angle it is.
Title: Re: There should be a name for this condition
Post by: Duke on January 26, 2013, 07:39:46 PM
I thin "Drag Queens" was a pretty good one. ;D
Title: Re: There should be a name for this condition
Post by: 1buckie on January 27, 2013, 12:04:35 AM
Quote from: Cookingmama on January 26, 2013, 08:30:01 AM
Quote from: 1buckie on January 25, 2013, 11:59:45 PM

.

I just didn't say anything & just kept using him, just like he was.....a demonstration of acceptance



I love that!

They all need a little love, just some more than others...... :D

Title: Re: There should be a name for this condition
Post by: reillyranch on January 27, 2013, 03:21:50 AM
Maybe "Drag Queen" could be the perpitratior and the "Dirty Angle" could be the crime.  i.e. What drag queen did this dirty angle?
Title: Re: There should be a name for this condition
Post by: Jeff on January 27, 2013, 04:23:36 AM
Quote from: reillyranch on January 27, 2013, 03:21:50 AM
Maybe "Drag Queen" could be the perpitratior and the "Dirty Angle" could be the crime.  i.e. What drag queen did this dirty angle?

Now I like the sound of that!
Title: Re: There should be a name for this condition
Post by: G$ on January 27, 2013, 08:53:52 AM
Quote from: reillyranch on January 27, 2013, 03:21:50 AM
Maybe "Drag Queen" could be the perpitratior and the "Dirty Angle" could be the crime.  i.e. What drag queen did this dirty angle?

Hahahahh. Perfect.
Title: Re: There should be a name for this condition
Post by: Craig on January 28, 2013, 06:03:34 PM
Quote from: reillyranch on January 27, 2013, 03:21:50 AM
Maybe "Drag Queen" could be the perpitratior and the "Dirty Angle" could be the crime.  i.e. What drag queen did this dirty angle?

I just got a visual of a drag queen sneaking on to someones patio at night dragging a kettle across the patio trying to achieve their dirty angle.  :o