did some swapping around with a couple perf tables ended up with an extra bowl-n-lid
(http://i46.photobucket.com/albums/f117/burleytoo/002_zps3a6e6511.jpg) (http://s46.photobucket.com/user/burleytoo/media/002_zps3a6e6511.jpg.html)
(http://i46.photobucket.com/albums/f117/burleytoo/003_zps310b54e5.jpg) (http://s46.photobucket.com/user/burleytoo/media/003_zps310b54e5.jpg.html)
(http://i46.photobucket.com/albums/f117/burleytoo/006_zps3cc702a0.jpg) (http://s46.photobucket.com/user/burleytoo/media/006_zps3cc702a0.jpg.html)
the last pic looks catawampus but everything is flat
added a gas start to it ( saw someones post here that helped with that ) ////after I got the gas tank mounted it was in the way so I added a shelf so it would be under it out of the way //// made the legs out of electrical conduit // made a bottom shelf on the bottom to brace the conduit out of concrete board
made the bracket to mount the regulator out of a piece of scrap metal bought the regulator on amazon http://www.amazon.com/Portable-Propane-Regulator-Throwaway-Cylinder/dp/B000DZKZLQ/ref=dp_cp_ob_lg_title_0 saw this on here or bretheren site
used the brackets that mount the bowl to the table to mount the shelf and fabricated bracket for the front
Looks pretty cool to me!
That's awesome! Nice job!
thanks guys
made the axle out of 1/2 " threaded rod ran a lock nut on each end backward to hold the conduit in place the a lock nut and washer outside to secure wheel
Looks like a winner to me!
the solid triangle at the bottom gives it that old meets new look lol
Well done.
Love that idea. All the functionality of a Performer without taking up the space.
That is fantastic, I love the out of the box thinking!