At first I was like :o Then I was like >:( And I'm still like >:( Tomorrow I'll probably be like :'(
(https://scontent-b-iad.xx.fbcdn.net/hphotos-xpa1/t1.0-9/936083_10203552529830100_81531826587375419_n.jpg)
This just happened to me a few weeks ago. Mine looked just like this too. Mine was so brittle that I was able to get it to snap off by prying on it with a screwdriver, it came off in pieces. I ordered a replacement vent from ereplacements.com and took the handle off that one. Pain in the butt, yeah, but all fixed now.
Did the tab bend on its own or was it bent before the melting?
Is that melted aluminium burbling out from under there?
If so, what were you cooking?
It looks like the plastic tab melted on itself. I hope you can get it off without much issue.
Haven't seen that before , using lump at high temps or what happened , did you just go limp ?
Holy shit!!!!
I melted the plastic rollers on my performer a few times, but that melted vent is extreme!!!
Mine melted when my wife closed the lid on two full charcoal baskets that I had been starting on my Performer. It really surprised me that it would melt like that.
Quote from: G$ on July 30, 2014, 08:28:26 PM
Did the tab bend on its own or was it bent before the melting?
The aluminum part of the tab is not actually melted. That line on the top is the tab sticking up through the melted plastic.
That thing got really hot!
The melted tab is fairly common on grills that see high heat.. It should be made of something like, I dunno, Wood?!
Quote from: Mark Schnell on July 31, 2014, 08:04:24 AM
Quote from: G$ on July 30, 2014, 08:28:26 PM
Did the tab bend on its own or was it bent before the melting?
The aluminum part of the tab is not actually melted. That line on the top is the tab sticking up through the melted plastic.
I get it now. That is really incredible.
Quote from: Heyjude on July 31, 2014, 08:05:43 AM
That thing got really hot!
The melted tab is fairly common on grills that see high heat.. It should be made of something like, I dunno, Wood?!
We know a guy.... ;)
Are the wood vent handles actually in work? Sounds like he has his hands full with the other handles. Does Weber offer the plastic handles by themselves, or is the only way to get them is with a replacement vent?
I've recently acquired two new blue lids. One is for a OTS/G and didn't have the CoolTouch handle. The other is for a Performer Platinum, and it had it. I bought the first lid from Craigslist, so he may have removed it.
They don't sell the handle by itself anymore. I had to buy the whole vent with handle attached. It was 6.98 from ereplacements.com. The handle pops off fairly easily and you can put it on your old vent. I just did that and it wasn't that hard at all.
Bman - I have a spare if you need it.
I guess my story wasn't much different than Mark's. I fired up an entire chimney of lump, dumped the coals, and went in to finish making up my skewers while the grill, uh, warmed up. Yeah, that was warm enough... :o
I posted it to Weber's FB page and like clockwork, they told me to call CS. I have to order a couple parts anyway, so I'll give em a shout in the morning. Just hope I can remove the melted goober w/o effin' up the EZ vent I have now.
Stay tuned for further details. ;D