News:

SMF - Just Installed!

Main Menu

My $10 1988 SJ Find

Started by Tom C, August 07, 2013, 04:46:19 PM

Previous topic - Next topic

Tom C

Found this one on Craigs List for $10. I could use some help with how to restore the handel and ash pan.






















Chasing_smoke

Nice find! I'm not sure on the handle but the ash pan will probably come up with some #0000 steel wool.


"my kettle is more powerful it will do almost anything."
MH Copper mist, Daisy Wheel P, Homer Simpson OTG, Blue 18, Blue Mastertouch, SJS, Genesis Sliver B, Red 18 Bar-b-q-kettle Pat Pending, Copper performer

javahog2002

I use 150 or 200 grit sand paper to remove the greying.  Stain with some Minwax Golden Pecan Stain followed by Minwax Polycrylic clear gloss.  I know most people suggest spar varnish. I am just using what I had in the garage.

SSP '00-WSM 18.5-WSM 22.0-'90 MT-Hasty Bake Cado

Harbormaster

Wire wheel on the pan and legs.

LIGHTLY sand the handle and hit it with Watco Teak Oil Finish.
I've got Webers. 10 - WSMs, 5 - 22.5" kettles, 2 - 18.5" kettle, 2 - SJS, 2 - SJP, 4 - WGA, 1 vintage Coolie Pan
"Animal flesh cooked over an open fire is a sensible and essential part of a well balanced diet"

Tom C

Thanks for the feedback.

I may make a University of Central Florida Knights mini WSM with it.






edhead35

White vinegar and water soak will break down most rust. Then 0000 Steel wool and metal polish

cbpeck

I agree with using 0000 on all the metal and porcelain surfaces. For the handle, review the long thread on preferred handle finishes that was beat to death a few weeks ago.  ;)

Tom C

Quote from: cbpeck on August 08, 2013, 10:09:08 AM
For the handle, review the long thread on preferred handle finishes that was beat to death a few weeks ago.  ;)

Can't find the thread yet but will keep on looking, thanks.

pbe gummi bear

"Have you hugged your Weber today?"
Check out WKC on Facebook:
https://www.facebook.com/pages/Weber-Kettle-Club/521728011229791