Weber go anywhere kit

[Tomo1970]

I just purchased a WGA for an upcoming trip. I was looking into them earlier and saw several videos where people make a complete tool kit with them.

Like this: https://m.youtube.com/watch?v=AHn5By6mjzU

Have any of you made a kit like this - if so share some info! Also this is my first grill this small - please share any tips/tricks if you have them!

Thanks,
Tom


Sent from my iPhone using Weber Kettle Club

[bamakettles]

I just purchased a WGA for an upcoming trip. I was looking into them earlier and saw several videos where people make a complete tool kit with them.

Like this: https://m.youtube.com/watch?v=AHn5By6mjzU

Have any of you made a kit like this - if so share some info! Also this is my first grill this small - please share any tips/tricks if you have them!

Thanks,
Tom


Sent from my iPhone using Weber Kettle Club

I've done a couple of these and they work great!  I cut my grate to fit sideways for travel/packing - not exactly in half but just enough for the long side to fit sideways in the grill for packing.  Added a few more parts and I've done a couple of cooks that turned out great.  I recommend an external temp monitor to keep things in check.  Here's a couple of pics..

[bamakettles]

Couple more pics....


Sent from my iPhone using Weber Kettle Club

[Tomo1970]

Couple more pics....


Sent from my iPhone using Weber Kettle Club

Nice set up - thanks for sharing!


Sent from my iPhone using Weber Kettle Club

[Mr.CPHo]

Love my little CGAs.

I opted for Craycort grates.  I flipped the internal cone of my small chimney to hold more fuel and I'll preload my chimney with broken up pieces of lump with my starter in the bottom.  (I use Stump Chunks).  I fold several pieces of aluminum foil on top to keep the lump from spilling out, the extra foil always comes in handy for various uses.  I use a drip pan from a Genesis which fits those disposable rectangular aluminum pans perfectly.  Extra latex gloves and TWO pairs of tongs to avoid cross contamination since running water isn't always available. 

[Tomo1970]

Love my little CGAs.

I opted for Craycort grates.  I flipped the internal cone of my small chimney to hold more fuel and I'll preload my chimney with broken up pieces of lump with my starter in the bottom.  (I use Stump Chunks).  I fold several pieces of aluminum foil on top to keep the lump from spilling out, the extra foil always comes in handy for various uses.  I use a drip pan from a Genesis which fits those disposable rectangular aluminum pans perfectly.  Extra latex gloves and TWO pairs of tongs to avoid cross contamination since running water isn't always available.

Great info - thanks! I'm gonna have to add those grates to the list.


Sent from my iPhone using Weber Kettle Club

[Tomo1970]

These go anywhere's seem to be very popular in Australia & New Zealand - finding a bunch of parts and videos from there.

Has anyone made an offset plate like this? If time permits I'll make 1 before our trip - seems like it will help reduce the mess.

https://thequeclub.com.au/products/jgbbqgaoffsetplatess


Sent from my iPhone using Weber Kettle Club

[Kneab]

This is one that I made from a peice of scrap SS.
It works great.

Sent from my SM-G975U using Weber Kettle Club mobile app

[Tomo1970]

This is one that I made from a peice of scrap SS.
It works great.

Sent from my SM-G975U using Weber Kettle Club mobile app

Nice! What about gauge stainless did you use?


Sent from my iPhone using Weber Kettle Club

[Kneab]

I am not sure, but if I was to guess I would think it is around 20 gauge.

Sent from my SM-G975U using Weber Kettle Club mobile app

[blu082003]

Love all those setups
Would be curious to see the craycorts

Sent from my iPhone using Weber Kettle Club

[Tomo1970]

Can someone send me the dimensions for the charcoal grate? My go anywhere is supposed to be here on Tuesday but I want to ahead and get my stainless for the offset plate.


Sent from my iPhone using Weber Kettle Club

[Foster Dahlet]

Can someone send me the dimensions for the charcoal grate? My go anywhere is supposed to be here on Tuesday but I want to ahead and get my stainless for the offset plate.


Sent from my iPhone using Weber Kettle Club

Dimensions here:

Weber Go Anywhere "Charcoal" Grate

Item #67168

9-1/4" X 14-9/16" steel rod "charcoal grate" for Weber Go-Anywhere Charcoal models. This grate is designed to support the charcoal in the lower portion of the grill. Genuine Weber Part.


10" X 16" Weber Go-Anywhere Chrome Rod Cooking Grid (Replaces Old Part Number 80631)

Item #67195

Chrome plated rod cooking grid for Weber Go-Anywhere Grill. Measures 10 inches front to back by 16 inches wide.  Replaces old Weber Part Number 80631. Genuine Weber OEM Part.



Sent from my LM-X420 using Weber Kettle Club mobile app

[Tomo1970]

Can someone send me the dimensions for the charcoal grate? My go anywhere is supposed to be here on Tuesday but I want to ahead and get my stainless for the offset plate.


Sent from my iPhone using Weber Kettle Club

Dimensions here:

Weber Go Anywhere "Charcoal" Grate

Item #67168

9-1/4" X 14-9/16" steel rod "charcoal grate" for Weber Go-Anywhere Charcoal models. This grate is designed to support the charcoal in the lower portion of the grill. Genuine Weber Part.


10" X 16" Weber Go-Anywhere Chrome Rod Cooking Grid (Replaces Old Part Number 80631)

Item #67195

Chrome plated rod cooking grid for Weber Go-Anywhere Grill. Measures 10 inches front to back by 16 inches wide.  Replaces old Weber Part Number 80631. Genuine Weber OEM Part.



Sent from my LM-X420 using Weber Kettle Club mobile app

Awesome - thank you! Perfect timing I'm on the way to the hardware store!


Sent from my iPhone using Weber Kettle Club

[Tomo1970]

I received my go anywhere today - blown away by how nice this thing is.

FYI I bought mine new on offer up and saved some money over retail price.


Sent from my iPhone using Weber Kettle Club