News:

SMF - Just Installed!

Main Menu

Internal Ash Pan

Started by TXFlyGuy, May 15, 2021, 05:55:59 PM

Previous topic - Next topic

TXFlyGuy

Please tell me if this will work for an internal ash pan.


2021 Bluebonnet Brewoff Winner
1st Place Gold Medal - Munich Helles
1st Place Gold Medal - Oktoberfest

Nasoj21

It is hard to tell from the photo. I usually put my charcoal all to one side to setup two zone cooking. If the ash pan seals up on the side, it will probably catch all the ash, but also block airflow from the intake on the bottom. If it doesn't seal up on the side a significant amount of ash will fall down the edge.

Cellar2ful


A 22" ash pan works perfectly as an Internal Ash Pan on 18" kettles. No restriction of air flow to the coals and no heat reduction noticed when used.  I've been using this method since 2018 when @addicted-to-smoke posted the idea. 

http://weberkettleclub.com/forums/index.php?topic=37289.msg376153#msg376153



Other than original IAP's, I have not found a suitable replacement use in 22" kettles.





"Chasing Classic Kettles"

blu082003

I'm also interested in this topic. I just ordered a 17" pizza pan should arrive tomorrow and hoping it will work as a ash pan.


Sent from my iPhone using Weber Kettle Club

TXFlyGuy

#4
In my above photo, it's a 22" external ash pan. It was placed inside of my Happy Cooker Kettle. It does not restrict airflow as it rests on the bolts / nuts that hold the dampers in place.

My concern was temperature...will this pan withstand 500-600 degrees F?

When using the dual charcoal baskets and having them center located, I would think this pan would be perfect.





2021 Bluebonnet Brewoff Winner
1st Place Gold Medal - Munich Helles
1st Place Gold Medal - Oktoberfest

TXFlyGuy

Quote from: blu082003 on May 15, 2021, 11:15:35 PM
I'm also interested in this topic. I just ordered a 17" pizza pan should arrive tomorrow and hoping it will work as a ash pan.


Sent from my iPhone using Weber Kettle Club

Let us know how it works. A 17" pizza pan should be perfect!
2021 Bluebonnet Brewoff Winner
1st Place Gold Medal - Munich Helles
1st Place Gold Medal - Oktoberfest

Cellar2ful


I have not had any problems with the aluminum ash pan withstanding the heat from the briquettes using it as a IAP.  This is after using it for over 3 years as a IAP.
"Chasing Classic Kettles"

TXFlyGuy

Quote from: Cellar2ful on May 16, 2021, 07:17:19 AM

I have not had any problems with the aluminum ash pan withstanding the heat from the briquettes using it as a IAP.  This is after using it for over 3 years as a IAP.

Good to know, thanks!
2021 Bluebonnet Brewoff Winner
1st Place Gold Medal - Munich Helles
1st Place Gold Medal - Oktoberfest

blu082003

Well my 17" pan ended up being 17.5" and a little to big. I'm going to try and modify it. We'll see how it turns out but I'll show pics if it does.


Sent from my iPhone using Weber Kettle Club

TXFlyGuy

Quote from: blu082003 on May 16, 2021, 03:57:07 PM
Well my 17" pan ended up being 17.5" and a little to big. I'm going to try and modify it. We'll see how it turns out but I'll show pics if it does.


Sent from my iPhone using Weber Kettle Club

Good, let us know. It looks like my 22" external pan is working for an internal installation...so far.
2021 Bluebonnet Brewoff Winner
1st Place Gold Medal - Munich Helles
1st Place Gold Medal - Oktoberfest

TXFlyGuy

#10
The external ash catcher for the 22" is working nicely as an internal ash pan. As long as you have the charcoal baskets centered on the grill.

2021 Bluebonnet Brewoff Winner
1st Place Gold Medal - Munich Helles
1st Place Gold Medal - Oktoberfest


Red_5_Wrangler

I was wondering what grill had 3 grate straps like that but now I see the handle.

Sent from my SM-N986U using Weber Kettle Club mobile app

ISO - CMist Go Anywhere, the cheif, yellow

TXFlyGuy

2021 Bluebonnet Brewoff Winner
1st Place Gold Medal - Munich Helles
1st Place Gold Medal - Oktoberfest