Author Topic: Sidekick table (Read 1059 times)

Speedster · « **on:** October 21, 2019, 02:00:19 PM »

Hey crew. Was wondering if anyone has the clamp that goes on kettle leg.
Or reference (picture) a clamp similar to old original clamp.
I’m sure walking to Home Depot I’ll find something. Just reaching out.
Thanks

Sent from my iPhone using Weber Kettle Club

RemoGaggi · « **Reply #1 on:** October 21, 2019, 02:11:11 PM »

I don't know if this is the original piece, but this is what was on my 22". It's currently not attached to my kettle right now, but I hope this helps. The clamp is held to the leg with the bolt and nut. The support arm goes between the nut and the wing nut.

JEBIV · « **Reply #2 on:** October 21, 2019, 02:19:26 PM »

Looks like an original clamp to me

Sent from my SAMSUNG-SM-G930A using Tapatalk

Cellar2ful · « **Reply #3 on:** October 21, 2019, 02:35:08 PM »

Yes, the photo @RemoGaggi posted above is an original clamp. Never seen one that shiny. Looks like NOS. Here's what they usually look like after being weathered.

Any 1" clamp with a bolt about 1" long will work. The support arm slips between the bolt and the wing nut.

Speedster · « **Reply #4 on:** October 21, 2019, 03:43:38 PM »

Thanks everyone this works.
I have the manual from WEBER they emailed me the manual.
It does look original.
Okay have something to go with upon my parts hunt. Should be easy.

Sent from my iPhone using Weber Kettle Club

Speedster · « **Reply #5 on:** October 21, 2019, 04:08:45 PM »

Sidekick 1800 manual

Sent from my iPhone using Weber Kettle Club

Author Topic: Sidekick table (Read 1059 times)

Speedster

Sidekick table

RemoGaggi

Re: Sidekick table

JEBIV

Re: Sidekick table

Cellar2ful

Re: Sidekick table

Speedster

Re: Sidekick table

Speedster

Re: Sidekick table