Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Help with stainless steel stain  (Read 901 times)

namtrag

  • WKC Brave
  • Posts: 461
Help with stainless steel stain
« on: October 09, 2017, 03:02:34 PM »


I can't even remember how I got this discolored spot on my performer.  I am vaguely remembering maybe setting something really hot down on it?   Anyway, I was cleaning the grill today and I used some steel wool on this area to no avail.  Is there anything else I can try?


Sent from my iPhone using Weber Kettle Club

varekai

  • WKC Ranger
  • Posts: 1932
Re: Help with stainless steel stain
« Reply #1 on: October 09, 2017, 03:14:27 PM »
Someone here used something like a 4000 grit wet/dry sandpaper... you have to go with the “grain” though.. it think Jim, @Cellar2ful  did a clean up recently...


Sent from my iPhone using Weber Kettle Club mobile app
CGA,GGA, jumbo joe, 3-18" kettles,22" blue,green,yellow and 2 reds, 1-22" lid mod for pizza, a genesis silver,2 Red SS Performers,2 26ers,1 red, 1 chief and a Ranch Kettle.

namtrag

  • WKC Brave
  • Posts: 461
Re: Help with stainless steel stain
« Reply #2 on: October 09, 2017, 05:18:17 PM »
Thanks for the tip!  I'll see if I can find it.


Sent from my iPhone using Weber Kettle Club

SteveZ

  • WKC Ranger
  • Posts: 563
Re: Help with stainless steel stain
« Reply #3 on: October 09, 2017, 05:33:18 PM »
I've sanded with 400 grit and used barkeepers  friend with good results.
SSP Caribique, Black 2nd Generation Performer, 2018 Green Performer, 1970 MBH 26 Black (Fleetwood) with Roti, 1965 Thumb Screw 49er, (2) Black 18 OTG, 2017 Black Master Touch, Black Genesis Silver B.  E code 14 WSM, AH code 18 WSM, AH code 22 WSM,

namtrag

  • WKC Brave
  • Posts: 461
Re: Help with stainless steel stain
« Reply #4 on: October 09, 2017, 05:42:12 PM »
I'll give it a try.  It's almost like the steel turned brown. I hope it comes off!


Sent from my iPhone using Weber Kettle Club

cwmfour

  • WKC Brave
  • Posts: 231
Re: Help with stainless steel stain
« Reply #5 on: October 11, 2017, 10:57:56 AM »
I would avoid using steel wool on stainless. The carbon steel can leave a coating on the stainless which will rust. Sand it with 300 or 400 grit paper on a block and it should go away.


Sent from my iPhone using Weber Kettle Club