Does anyone know where to get the old smokey joe washers?

[Duke]

The ones that came with the old kettles that seperated the bowl from the leg. I don't think they were rubber, but they aren''t metal either. I think they are nylon. I will find one and post a pic.

[pbe gummi bear]

The ones from the Kettles are 1/4" you can get them from amazon @$11 for 100 with free shipping.

http://www.amazon.com/Nylon-Flat-Washer-Screw-Thick/dp/B009OLNI00/ref=sr_1_7?ie=UTF8&qid=1367475931&sr=8-7&keywords=nylon+washer+1%2F4%22

[Bman]

Wouldn't nylon melt?  The WSM uses fiber washers and those can be bought at Home Depot/Lowes.

[bryanw21157]

I just make them out of bones left over from making ribs. 

[Duke]

Wouldn't nylon melt?  The WSM uses fiber washers and those can be bought at Home Depot/Lowes.

Yeah, the same material as the wsm uses. HD you say? I will need to check there. Any idea what weber calls them?

[sparky]

Fiber Washers ( 8 ) - Part #877301   that's what my wsm manual says.

[Duke]

I think these may be a little smaller than the wsm ones though. They are still 1/4 inch, but look like they aren't as wide. Does anyone have a picture of one from a wsm?

[Heyjude]

These:

http://www.ereplacementparts.com/14inch-116inch-fiber-washer-p-1475863.html

[Duke]

Those are them! Thanks AJ, you are the best parts slueth around. I think it is the same one as the wsm now. I am going to check hd for a box.

[Bman]

When I did the mods to my WSM, I used the Depot fiber washers between my bolts & WSM body.  They're found in the drawers next to the specialty hardware.  Come in all various sizes too.

[pbe gummi bear]

Fiber washers, eh? Thanks for teaching me something today!

[Duke]

When I did the mods to my WSM, I used the Depot fiber washers between my bolts & WSM body.  They're found in the drawers next to the specialty hardware.  Come in all various sizes too.

I just pickes some up the size say they are. 1/4x 1/2. They look right.

[Craig]

I was going to say that we had those when I worked for HD.


Sent from my iPhone using Tapatalk 2

[Duke]

They make a soft buffer between the legs and the bowl to keep from getting chops in the porcelain from overtightening. I just put a set on and they are pretty snug and there's no metal to metal contact.