Wood Dale hub caps.

[Speedster]

So just picked up this wood Dale!

Anyone know what's the easiest way to remove the hub cap, without damaging the cap? Once removed am I able to reuse the cap.

The reason being for cleaning, and one wheel has the whitewall wheel installed backwards onto the triangle.


Sent from my iPhone using Weber Kettle Club mobile app

[attachment deleted by admin]

[hardyparsons]

I'm curios to that as well. I need to clean mine up but I hadn't look that close yet.


Sent from my iPhone using Tapatalk

[Neil_VT00]

I don't have any special advice for getting them off, but you can get new ones if your removal doesn't go as planned:
https://www.lowes.com/pd/Hillman-3-8-in-Nickel-Axle-Push-Nut/3012502

The one set I took off I just used a pry bar under each side of the nut and worked it off applying alternating pressure.  I knew they were getting replaced so I wasn't worried about keeping them in good shape.

[Speedster]

I don't have any special advice for getting them off, but you can get new ones if your removal doesn't go as planned:
https://www.lowes.com/pd/Hillman-3-8-in-Nickel-Axle-Push-Nut/3012502

The one set I took off I just used a pry bar under each side of the nut and worked it off applying alternating pressure.  I knew they were getting replaced so I wasn't worried about keeping them in good shape.

Wow thanks!


Sent from my iPhone using Weber Kettle Club mobile app

[Speedster]

How about the tire tread. Any information in restoring the rubber? Or replacing, or is it one of those S.O.L.


Sent from my iPhone using Weber Kettle Club mobile app

[Neil_VT00]

It's being worked on:
http://weberkettleclub.com/forums/weber-grill-modifications-customs/wkc-mod-bounty-steel-wheel-re-tread/