News:

SMF - Just Installed!

Main Menu

Another repair leftover part

Started by charred, May 17, 2017, 03:55:32 PM

Previous topic - Next topic

charred

Beaten by the 7409 ash sweep washer.

What's its purpose, other than to piss me off?  :o

hopelessly, helplessly, happily addicted to a shipload of Webers

Foster Dahlet

I like my Kettles like my coffee....strong and black.

2019 Black 26" OKP; 2015 Black 22" OKP; 2004 Black SJP; mid 70's Statesman; mid 70's Gourmet, 2017 Black CGA; 2000 Black GGA;

charred

thanks, but what am I looking for/at?
hopelessly, helplessly, happily addicted to a shipload of Webers

Foster Dahlet

@ charred, i don't know!  :)   i couldn't figure out what the problem was that you were having with the washer....so i posted a pic so you could point out what was wrong.   aren't we all using h washer these days anyway?
I like my Kettles like my coffee....strong and black.

2019 Black 26" OKP; 2015 Black 22" OKP; 2004 Black SJP; mid 70's Statesman; mid 70's Gourmet, 2017 Black CGA; 2000 Black GGA;

charred

lol. ok.

I bought a work table that came w/ a black OTS. I was surprised I could loosen the thumbscrew by hand, so I decided to use that 7409 for a Red SSP restore. I can't squeeze the sweep handle rod through the hex nut with the washer in place. After fighting it for half an hour I left it off. Sweeps work fine without it and everything seems stable.
hopelessly, helplessly, happily addicted to a shipload of Webers

Cellar2ful


@charred - The washer on #7409 sweeps is used on non ash bucket models, taking the place of the cross bar on the OTS's.  With no cross bar on the OTS's the washer is needed to make up for the absence of the cross bar.  As you have already determined,  toss the washer when installing #7409 sweeps on a SSP.  Not needed. Wished I could have saved you the 1/2 hour frustration.
"Chasing Classic Kettles"

Heyjude

#6
I have a 26er that is so tight, I can't get the handle on with the washer..
Is it because some kettles are thicker or the washers are?

I don't care if you don't like my Avatar, its there for me..

Foster Dahlet

Quote from: Cellar2ful on May 17, 2017, 07:56:11 PM

@charred - The washer on #7409 sweeps is used on non ash bucket models, taking the place of the cross bar on the OTS's.  With no cross bar on the OTS's the washer is needed to make up for the absence of the cross bar.  As you have already determined,  toss the washer when installing #7409 sweeps on a SSP.  Not needed. Wished I could have saved you the 1/2 hour frustration.

@Cellar2ful , thanks for shedding light on that!
I like my Kettles like my coffee....strong and black.

2019 Black 26" OKP; 2015 Black 22" OKP; 2004 Black SJP; mid 70's Statesman; mid 70's Gourmet, 2017 Black CGA; 2000 Black GGA;

charred

Swear to god it dawned on me as soon as i made my previous post- doh! Thanks.

Sent from my LGMS210 using Weber Kettle Club mobile app

hopelessly, helplessly, happily addicted to a shipload of Webers