What's this worth, Updated!

[HoosierKettle]

Stop obsessing if it was worth 50. You did good. I've paid $30 for just a lid bail and another $30 for a bezel and lid therm from ereplacement parts.  $50 is nothing compared to how much use you will get out of this. Even if you bought the $68 table it would still be worth it imo. Anything other than basic kettles are rare in my area.


Sent from my iPhone using Weber Kettle Club mobile app

[Jeepin79]

Stop obsessing if it was worth 50. You did good. I've paid $30 for just a lid bail and another $30 for a bezel and lid therm from ereplacement parts.  $50 is nothing compared to how much use you will get out of this. Even if you bought the $68 table it would still be worth it imo. Anything other than basic kettles are rare in my area.


Sent from my iPhone using Weber Kettle Club mobile app

I took it all apart last night and cleaned it all up except the kettle itself, that will be todays project if I can make some time.  I was able to "push" the dent out on the lid and it looks fine except for the little bit of porcelain chips around the handle.  I am still undecided on if I should call Weber and get a new table or just make a wood one.  Either way I will figure that part out.  So far I am very pleased with this purchase.  More photos to follow after I get the kettle cleaned up.

[Mr.CPHo]

I'm pleased with your purchase too, these OTPs have so much potential.  I parted out a 22"OTP a few months ago, maybe @Indy82z can make a template for you.   Good luck and have fun. 


Sent from my iPhone using Weber Kettle Club mobile app

[MINIgrillin]

Ikea has some decent cheap butcher blocks you could use.

[Jeepin79]

Ikea has some decent cheap butcher blocks you could use.

Your reading my mind.  I was thinking butcher block was going to be my choice for the table.  My woodworking skills are not the greatest but I will take my time and get it done.  I can use my metal Performer table for a template.  I did not realize they were the same except for the screw holes until I read some threads this weekend.  I would love a metal table on it but I don't want to spend that much if I can avoid it. 

[Jeepin79]

I called Weber CS yesterday and they were kind enough to take care of me and send me a new table for less than it would have cost me to make one myself so I went that route.  I am still cleaning up the lid but here is how she sits at the moment.

[Foster Dahlet]

I called Weber CS yesterday and they were kind enough to take care of me and send me a new table for less than it would have cost me to make one myself so I went that route.  I am still cleaning up the lid but here is how she sits at the moment.

Awesome.  What a difference....and they still had the reinforced plastic ones! 

[Jeepin79]

Yeah it was not my first choice to have another plastic one but it will be taken care of so it should last a long time.