Placement of Maverick E732 Thermometer in Performer

Started by cnmg432, April 08, 2016, 07:47:16 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

cnmg432

April 08, 2016, 07:47:16 AM
What is the preferred way of running the proves from the E732 into the Performer?  Is under the lid ok?  What about through the top vents?

indy82z

#1
April 08, 2016, 08:05:28 AM
I just run mine under the lid...just be easy and you should be fine. I have been using the same one for at least a couple of years with no problems.

MikeRocksTheRed

#2
April 08, 2016, 08:14:02 AM
+ 1 for under the lid.   When I use my roto and hang it through the lid vent since there isn't anything to clip it on.
62-68 Avocado BAR-B-Q Kettle, Red ER SS Performer, Green DA SS Performer, Black EE three wheeler, 1 SJS, 1 Homer Simpson SJS,  AT Black 26er, 82 Kettle Gasser Deluxe, "A" code 18.5 MBH, M Code Tuck-n-Carry, P Code Go Anywhere, 2015 RANCH FREAKING KETTLE!!!!!!

jolayiv

#3
April 08, 2016, 08:40:27 AM
I have been running mine through the top vent as I was afraid to "pinch" the probe wires. But as said above if you take it easy you should be good.

Have any of you guys thought about putting a couple of holes with grommets like the new WSMs?


Sent from my iPhone using Tapatalk
Jim
Print
Go Up Pages1
User actions