I'm just now getting around to posting shots of a 22.5 MBH B Code that I cleaned up. It's a CL find that was about an hour away and only a few pennies. Unfortunately (or fortunately), no fascinating story or complicated restore with this one. It's just a 35 year old kettle that needed some TLC.
Shot from the CL ad. Gentleman didn't realize that "old Webers could be collectible." For his own sake, I didn't go into a long explanation about this place.
Some before shots. The main issues were that it was caked with past cooks on the inside, the bottom 3 daisy wheels were a bit out of shape, and a slight, even fade to fugrayzzi. Other than that, the grill was well cared for and had all it's parts. It needed more elbow grease than anything else. I forgot to put the ash pan on for both before and after shots, but the original came with the grill. It's the bent edge style.
And the after shots. A small sliver has rusted through in the area of the leg socket welds. There was also a bit more rim rash (than anticipated) on the lid after cleaning it up. The handle wasn't cracked and still held tight so I decided to just clean it up and refinish it (sorry Brian,
@zavod44 .) I went with a semi-gloss SPAR varnish on top of tung oil that came out shinier than I would have liked, but I'm fine with it.
The after shots were done in the shade so the bowl appears darker than the before shots. It is still the same speckled fugrayzzi I picked up, I didn't use the Pam trick. I also forgot an after shot of the bottom daisy wheels, but they came clean as well. The grates were also in OK shape, I just didn't put them back in yet. I may get a Craycort or MT setup for this kettle but I'm still on the fence. It's nothing fancy or rare, but it was a good candidate to "restore" since I wouldn't be too upset if I muffed it up.