News:

SMF - Just Installed!

Main Menu

22" kettle stacker 2.0

Started by Antisven84, September 14, 2015, 12:52:01 PM

Previous topic - Next topic

Antisven84

Well I found my next project, weber stacker 2.0! To be constructed from this stainless adblue tank that was salvaged from my work.
The plan is fairly simple, chop the end with the fill cap off where it meets the body, chop the other end off, then make 2 cuts to reduce the diameter from 62.5cm to 56cm.
That's gonna involve removing 20cm from the circumference of it, (which will also conveniently eliminate that hole), then re-welding it together.
Addition mods will of course include handles, a smokey mountain probe grommet, and a multi level grate system involving piano hinging, and making a proper lip for the top. Not entirely sure that I'll need a latching system yet though.
Also the section with the fill cap will be repurposed to a tub to soak/clean the grates.


jcnaz

Sounds like a plan. Keep the pics coming.
A bunch of black kettles
-JC

Qreps

I look forward to seeing your project.

1911Ron

Definitely want to see the finished product!
Wanted: 18" Platinum any color will work
This is my Kettle there are many like it but this one is mine......

Jocool

Will you be cutting up the Camry too?

Sent from my SM-N910G using Tapatalk

If it breathes, we can cook it!

Jocool

😁

Sent from my SM-N910G using Tapatalk

If it breathes, we can cook it!