Bisbee Mod - she is now twice the grill/smoker/?

[Winz]

I have been playing with the idea of a stand alone mod that would work with Bisbee (my Copper SS performer).  Argentflame recently provided me with a SS cart to allow the project to go forward.  The concept is to increase overall counterspace, provide more grilling, smoking, etc area, and yet make sure that I can still use my existing covers.

Here is Bisbee and the new cart.  In its current configuration, I am using my 18.5 WSM, however, I could just as easily drop in another performer bowl (two grill set up), put in a shelf for a mini WSM, (mini smoker setup), or just about anything else.  I like the flexibility to continue to tinker.

Here are the two carts unattached.  In this configuration I can cover both Bisbee and the WSM using their existing covers:



Here they are attached.  I use a simple cotter pin on each side to fasten Bisbee's extended shelf to the other cart:





I had a piece of 10 gauge steel fabricated for the base of the WSM configuration.  It is shaped like a "T" to provide attachment points for two legs of the WSM, with a narrower section that conforms to the existing storage rails:



I drilled holes in the bottom of the WSM legs, though the steel, and through the cross support of the cart.  Two cotter pins run through the holes.  This prevents the WSM and the shelf from moving, yet by pulling the pins, everything can be removed in seconds.   The fuel door of the WSM is fully exposed at the end of the cart for adding water/fuel as necessary:



Miles of work space.  This is very handy for food prep, but also very handy as a place to set the top/middle sections of the WSM on while tending food:





I think my deck needs a good cleaning/re-stain.....

I am currently working on a copper colored WSM mini smoker (Sierralita), and will fabricate a shelf for the cart for that purpose.  The shelf will be held in place by pins through the existing holes in the cart that hold a kettle in place.  Other plans include some storage space mods under the SS table for fuel, gloves, knives, etc.


Winz

[Golly]

eye likkee

[crumbsnatcher]

Holy workspace, Batman!  You can set up a buffet on that SS tabletop Winz!


Sent from my iPhone using Tapatalk

[mike.stavlund]

Brilliant.  And beautiful. 

Yep, I am always looking for a decent place to set the center section of the WSM when I'm starting or finishing a cook. This is perfect.

[Idahawk]

Nicely done

[dazzo]

Outstanding!

[1911Ron]

I like it!

[salad]

Well, you don't see that everyday! 

[argentflame]

Spectacular setup. Thank you for the great ideas. Now I know what to do with my WSM. It didn't even take long for you to accomplish this. Awesome powder coat on the carts.

[mirkwood]

I like the way your mind works Winz.. This project is turning out really nice.

[wyd]

Very nice.  I really like your setup.

[1buckie]

"I think my deck needs a good cleaning/re-stain....."


Heck, at the rate you're going, you could just stainless sheet the deck, lay down some mats to protect your tootsies from the summer sun & create an entire kettle maze....sorta like crop circles or something?


Way diggin' the wildly creative mods here, man................


Get a few pics up on the "Show Your Grill" FB page at Weber......this will scare some people................

[blackdog043]

That's a nice set up, for some extra work space!

[Cuda Dan]

Winz
Great design and execution on design! I like the stand alone part and the removable center top. Nice job. Did I see a small chimney starter? How do you like it?

[pbe gummi bear]

Looking good, Winz! Do I see a 22.5" wsm in your future?