Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Best place to run the probes into a kettle ?  (Read 6112 times)

toebone

  • WKC Brave
  • Posts: 108
Re: Best place to run the probes into a kettle ?
« Reply #30 on: August 24, 2017, 07:11:28 PM »
I go through the top vent then stab it into an onion sitting on the grill so it's at the same height as the food I'm cooking.


Sent from my iPhone using Weber Kettle Club

foshizzle

  • WKC Brave
  • Posts: 351
Re: Best place to run the probes into a kettle ?
« Reply #31 on: August 24, 2017, 09:58:18 PM »
I found it a real pain on the WSM to put the curved temp probe through the grommet and also taking it back out quickly through the grommet during the cook.  It felt like the temp probe would come apart with the tugging and pushing to get it through the slit.

As some of the other guys did I cut a notch in the middle section so all you have to do is just set the wires into the groove and your good to go.

Here's a video a guy did on notching your grill
https://youtu.be/ouhn2aky0uc


Sent from my iPhone using Weber Kettle Club mobile app

TartanAvenger

  • WKC Brave
  • Posts: 102
Re: Best place to run the probes into a kettle ?
« Reply #32 on: August 24, 2017, 11:37:01 PM »
Can't hurt the wires. I used the iGrill every day and am not careful with it at all. Bowl and lid. . Like everyone else, save for the thermapen guy

Sent from my SM-G935T using Weber Kettle Club mobile app


Gutsit

  • Smokey Joe
  • Posts: 24
Re: Best place to run the probes into a kettle ?
« Reply #33 on: August 25, 2017, 04:10:28 AM »
Thanks,

A lot of great info here.

cheers.