Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Weber Flame Natural Gas to Propane Conversion  (Read 636 times)


  • Happy Cooker
  • Posts: 3
Weber Flame Natural Gas to Propane Conversion
« on: February 09, 2019, 12:11:37 PM »
I recently came across a Weber Flame for free on Craigslist. While I do plan to run a natural
gas line out to my deck, I like the idea of using a propane tank with it instead for better portability.

With Weber grills it seems all you need to do is buy a new regulator and switch out the orifices. Opening up the burner tube on the Weber flame, the orifce was much larger, close to an inch in size, while the orifce bolt is probably 3/8 to 1/2 inch on a Weber grill.

Am I looking in the wrong place for the orifce? Has anyone converted a Weber Flame from natural gas to propane?


  • WKC Ranger
  • Posts: 1904
Re: Weber Flame Natural Gas to Propane Conversion
« Reply #1 on: February 09, 2019, 05:43:50 PM »
@nuol91 , look "back" at the part that sits just inside the tube, that should be the orifice, the orifice is usually not attached directly to the tube itself... but threads into the "bar" attached to the control knob. I hope this makes sense...
« Last Edit: February 09, 2019, 05:48:45 PM by varekai »
CGA,GGA, jumbo joe, 3-18" kettles,22" blue,green,yellow and 2 reds, 1-22" lid mod for pizza, a genesis silver,2 Red SS Performers,2 26ers,1 red, 1 chief and a Ranch Kettle.