Weber Kettle Club Forums
Grill Talk => Weber Grill Forum (Grills, Accessories) => Topic started by: smokeyjoe on July 16, 2020, 11:42:33 AM
-
For anyone asking for a new color 26. It’s available now.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
You spoke, they listened.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Awesome news.
-
My birthday is in February guys... lol
-
I am so so happy to see this released! Had been shopping and was torn between the out of stock crate and barrel blue performer deluxe, and a more “temporary” solution. This looks like a keeper!
Just need to get a dedicated prep table now.
-
Holy hell!!
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I shall now own a 26!
-
Very nice grill!
-
My day has finally come. I ordered one!
-
All you talkers now's the time to put your money where your mouth is.
Sent from my SM-J700P using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Doubt Australia will get a chance. Keen to see you all with your new kettles [emoji106]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
All you talkers now's the time to put your money where your mouth is.
Sent from my SM-J700P using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Lol, that’s exactly what I commented in the WKC Australia page! I’ll report back when mine comes.
-
Just need to get a dedicated prep table now.
The plastic Weber side table has a curve that fits the 26, you just have to drill a couple holes for legs to make it stand a bit taller. Best part is the performer cover fits the 26 with side table.
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I just ordered my glen blue 26”
It will be my first 26”
-
Cool! I'll be getting a glen blue 26 for sure!
-
Do I see spin lines?
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Just tried to order one. Shows that it's available until you get to checkout.
-
It can’t have sold out that fast, can it?
-
$399 [emoji22]
Sent from my Pixel 3 XL using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Can’t check out :(
-
Oh it did, the FB kettle groups are buzzing about this.....
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Did we miss the boat or will there be a restock. Crossing my fingers
-
Out of stock. So bummed, was working all day on my sister in law's house.
-
I sure hope there is a restock...
-
PHEW, glad I managed to get my order in already
-
Wow oh wow!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Out of stock already.
-
I was going to decide when I got home, guess I should have just made the call and gotten it when I had the chance. Hoping they have another round, definitely kicking myself in the butt over it.
-
Called for the heck of it earlier and waited over an hour to speak with someone. I was able to place an order. As of 5 minutes ago she said “there are 51 left in our inventory.” Just received email confirmation I suggest you guys call. Act fast!!!!!
-
On myyyyyyyyyyyy!!!
Unfortunately I was on the road all day and only now found out.
Please, Grill Gods, let there be more available soon. PLEASE!
-
Called for the heck of it earlier and waited over an hour to speak with someone. I was able to place an order. As of 5 minutes ago she said “there are 51 left in our inventory.” Just received email confirmation I suggest you guys call. Act fast!!!!!
So you got the impression it’s a single run and that’s all there will be?
-
I just called but they’re closed for the day :(
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Huh, I’m still on hold
-
Got someone just before 8pm central, no availability on their end either now. But might as well stay on so you can ask about it maybe it'll show interest and they will extend the run.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Called for the heck of it earlier and waited over an hour to speak with someone. I was able to place an order. As of 5 minutes ago she said “there are 51 left in our inventory.” Just received email confirmation I suggest you guys call. Act fast!!!!!
So you got the impression it’s a single run and that’s all there will be?
Not at all. Weber is in the business of making money. There will be more. I’m just impatient :)
-
I got through and they let me order one. Very cool
-
What the heck they didn't let me order one, this is incredibly frustrating...
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I managed to get an order in earlier in the day. As much as getting a "limited" grill would be cool, I really have no interest in selling one. Hell if it were too rare I wouldn't want to get it dirty. I hope everyone here at WKC that wanted one gets one.
-
Heads up! Looks like it’s back in stock online (for now)
-
Got mine ordered! WOOHOO!
-
My wife got woken up by a friend and she got one in stock !!! I think she ordered it in her sleep.
I had texted her they were sold out. Too funny, my subliminal messages worked out. Maybe I’m on to something here.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Yeah I think the universe is telling me I don't need this. Hahah
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I just got off the phone and was able to place an order. It took a little sweet talking to get it done. She told me that they were only available thru Weber.com and I said that a few guys were saying that the were able to order over the phone. She also said that there were only 15 in stock according to her computer. We'll see if it happens. Just checked the website and they show available again.
-
I can't imagine that that would make a change over at the factory and then have the blast from the past story just to sell a few hundred. From the shortage of black 26s it seems they had to stop one for the other.
Selling them out in hrs... Some exec is not going to let all those extra sales slip away.
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Damn....
I guess I'm not supposed to get one this time around.
-
I called last night at ~7p their time and after about a 10-min hold, was auto-directed to leave a message.
Have been on hold for 57 mins now.
-
I was told they are expecting more inventory next week, so if they are out you could still place an order to have a spot when they get more in. Rep seemed pretty sure of it, didn't seem as clueless as the one I got last night. Hope this works for any of us that missed the initial release.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Hoping for a restock on these....I didnt see until this morning!
-
Who all was able to grab one?
-
At 1 hour and 55 mins of hold time my call was answered. The CSR was friendly but generally clueless re: the grill. All I got out of the call was the promise of an email with updated info on future availability. :/
-
Its back up online, just got mine.
-
Looks great!
Do all modern 26ers have a second set of leg sockets to hold the ash pan?
(https://product-images.weber.com/grill-features/2020-OKP-Glen-Blue/16417001P_REV_1600x960.jpg?auto=compress,format&fit=clip&w=1000)
-
That does look like a leg socket, I think it might be a weird angle on the little things that hold the ring though
-
Looks great!
Do all modern 26ers have a second set of leg sockets to hold the ash pan?
(https://product-images.weber.com/grill-features/2020-OKP-Glen-Blue/16417001P_REV_1600x960.jpg?auto=compress,format&fit=clip&w=1000)
Yes, 1 set leg socket, 1 set of brackets to hold pan
-
(https://i.postimg.cc/L6XskdBj/20200717-140111.jpg) (https://postimg.cc/qgP005F7)photo uploader for website (https://postimages.org/)
Tried to re-create that angle, and it looks like a socket too I think,definitely not a leg socket though
-
Does anyone know if you order from Weber if you need to sign for it when it arrives via FedEx? This grill being $400 is why I ask. I live with some immunocompromised individuals so I try and limit my exposure to others as much as I can.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Ordered!
-
Just got mine!
Sent from my iPhone using Tapatalk
-
Does anyone know if you order from Weber if you need to sign for it when it arrives via FedEx? This grill being $400 is why I ask. I live with some immunocompromised individuals so I try and limit my exposure to others as much as I can.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
It shouldn’t. FedEx isn’t even requiring actual signatures for alcohol shipments right now.
Sent from my iPhone using Tapatalk
-
Does anyone know if you order from Weber if you need to sign for it when it arrives via FedEx? This grill being $400 is why I ask. I live with some immunocompromised individuals so I try and limit my exposure to others as much as I can.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
It shouldn’t. FedEx isn’t even requiring actual signatures for alcohol shipments right now.
Sent from my iPhone using Tapatalk
Thanks for the response! USPS will sign for you from a distance if you answer your door and give them the verbal go ahead. But I purchased a knife and the guy shipped via FedEx and required a signature and some punk kid came up in my face and asked me to sign and I just told him to sign for me and set it on the bench.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
So now the big question, are these made in the USA or are they Chinese like the red ones and their craptacular quality?
-
That is a good question I was wondering that myself. But just got off the phone with Weber they had 71 available and I was able to purchase one. That’s the 3rd time i called first hold time 40min 2 hold time 35min. This time was only 15 and they answered [emoji1374]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
The history page they put up about the Glen Blue claims it is “applied by hand at our factory in Huntley, Illinois...”
-
The history page they put up about the Glen Blue claims it is “applied by hand at our factory in Huntley, Illinois...”
That is good then. Now we just need them in 22"
-
I called Weber customer service and the person I spoke with said they would have in stock soon. I was able to get one this afternoon after checking all day on the website.
-
Wife just surprised me and ordered a glen blue 26 for “Christmas” lol. What a gal
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Wife just surprised me and ordered a glen blue 26 for “Christmas” lol. What a gal
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Christmas in July ! That’s a grate wife.
-
Update: they came back in stock and I ordered one 🤦♂️[emoji41]
It took everything in me not to order one. I felt such relief when I checked back and it said Currently Unavailable. Still want one, but just not in the cards for me at the moment.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I almost considered pulling a prank and saying I got my shipping notification that it would be here Monday. I wonder how many of us would have been frantically checking our e-mail? Haha.
I did get an order in on day one though. If by some chance no one has beat me to it I will try to get it assembled on the day of arrival for photo time.
-
I live close enough to the warehouse, I should just save them the hassle and go pick it up.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
This morning (7/18/20) at 9:21am EST Weber.com had 26” glen blue kettles available.
-
Weber does a great job of selling the kettle by making it available and then making it unavailable and then start the process all over again.
Some people will buy it period. But for others that are on the fence and not sure this unknown gets them motivated enough to buy it now. Weber’s smart.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Got a shipping notification! It's giving me Tuesday as the estimate.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Weber does a great job of selling the kettle by making it available and then making it unavailable and then start the process all over again.
Some people will buy it period. But for others that are on the fence and not sure this unknown gets them motivated enough to buy it now. Weber’s smart.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
You know a limited charcoal Summit would be the only thing to get me to pull the trigger on one.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Weber does a great job of selling the kettle by making it available and then making it unavailable and then start the process all over again.
Some people will buy it period. But for others that are on the fence and not sure this unknown gets them motivated enough to buy it now. Weber’s smart.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
That’s exactly what happened to me. I was on the fence and then relieved when it said “currently unavailable.” Then I checked back again last night around 8 PM and they said “available” so I decided what the heck?!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
ETA delivery is Tuesday. Woohoo!
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I don't see it in Canada. Thank goodness.
Sent from my ONEPLUS A5010 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
ETA delivery is Tuesday. Woohoo!
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Lucky, mines not coming till Friday. Looks like I’ll have to see your pictures and get jealous for a few days.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Wednesday delivery confirmed here
Sent from my iPhone using Tapatalk
-
I might have to break down and swap out my black 26er for this.
Sent from my LM-X420 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I recently acquired hardware for a sidekick. Will that fit on the 26?
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I think you just had the wire frame and the bar that connects to the leg?
I imagine you would need to bend the wire frame out slightly out of square so the tabs would fit the kettle correctly. The lower bar that connects to the leg would also probably need to be replace with something longer or extended. Then the table would need to be made bigger so it wouldn't show the out of square frame and the bowl curve would be custom.
Another idea that someone in the mods section came up with was taking an old performer frame and turning it into a side table that slides up next to the kettle. Again that would be fairly custom with a table and some bar extensions to make it wide enough to slide a 26er up to it.I recently acquired hardware for a sidekick. Will that fit on the 26?
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Waiting for Wed...
-
Mine is delivering today and I'm on vacation all week
Sent from my SM-G975U using Tapatalk
-
Mine is delivering today and I'm on vacation all week
Sent from my SM-G975U using Tapatalk
Looks like I’m headed to Georgia [emoji12]
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Mine is delivering today and I'm on vacation all week
Sent from my SM-G975U using Tapatalk
Looks like I’m headed to Georgia [emoji12]
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Front stoop, im insured, you have the address correct?
Sent from my SM-G975U using Tapatalk
-
Mine is delivering today and I'm on vacation all week
Sent from my SM-G975U using Tapatalk
Looks like I’m headed to Georgia [emoji12]
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Front stoop, im insured, you have the address correct?
Sent from my SM-G975U using Tapatalk
Lol. I do need to order one of these. Pretty darn cool.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I really want one but am waiting for everyone’s experience. Looking forward to see the unboxings!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I cannot wait for the unboxing pics to start rolling in!! Congrats to all that have one coming.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Good thing it isn't in Canada. Probably priced near 600 bucks.
Sent from my SM-G975W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Damn some guys are getting theirs already!
Mine hasn't even shipped yet :(
-
At least I’m not the only one waiting...
-
Has the whole world gone crazy???
Taco or no friggin' taco.............I'd still have it in the yard.
Holy crap boys.....holy crap.
That is all.
-
Shipping label was created on Saturday per FedEx tracking and my 26" is scheduled to be delivered on Thursday (7/23).
-
No shipping email for me yet.... trying to be patient...
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Same here... it wouldn't bother me so much if it wasn't for the fact that other members ordered a day or two after me and already have theirs shipped out. I am also off this week so I am itching to get it for a cook this week.
No shipping email for me yet.... trying to be patient...
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Same here... it wouldn't bother me so much if it wasn't for the fact that other members ordered a day or two after me and already have theirs shipped out. I am also off this week so I am itching to get it for a cook this week.No shipping email for me yet.... trying to be patient...
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I might check on it, this happened to me when I ordered the spring green kettle a month ago. My order was in limbo and the warehouse never received it, got it after a month. They made sure to include some free accessories but it was still a bit annoying. Order still doesn't come up as shipped on my history.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I would'nt put to much stock in the shipping dates. I think FedEx just generates that based on when the info was sent out. I've recently had a few warranty items shipped and they showed up 4-5 days after FedEx said they would.
-
Just called, and I’m on back order. Interesting
-
Just called, and I’m on back order. Interesting
Mine hasn’t shipped out either. I’m sure I’m in the same boat. Ordered Friday evening after I thought they were gone for good, but checked back and it said Available so I went for it.
I just hope they don’t hurry too much and sacrifice QC. I’d rather them take their time.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Hopefully they'll do another run.
Does anyone know if this is a USA exclusive?
-
Finally got my notification! Coming on Wednesday! Hang in there fellas hopefully yours is coming soon!
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Me too!!! Stoked!!!
-
Mine is actually on the move now. FedEx still shows Wednesday from IL down to NC.
Sent from my iPhone using Tapatalk
-
Just checked tracking....it finally made it to the Carol Stream, IL FEDEX facility. ETA remains end of day Wed.
900 miles to go...fingers crossed.
-
Got my shipping notification around noon. Mine should arrive on Wednesday.
I still can’t believe I actually bought one and didn’t talk myself out of it.
-
Mine's arriving next Monday...very excited!
-
Arriving tomorrow. It feels like Christmas
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Shipping notification around 1pm. Arrives in Cali this Friday :) Super excited
-
My wife ordered one and it is supposed to be here Tuesday July 21 by end of day. Please don’t be jealous as we live about 40 miles south of Chicago. Shipping is very quick from Weber here. Fingers crossed it arrives undamaged.........
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I want one, and willing to order but Weber won't let me backorder. They did confirm that they will have more soon, just could not confirm when. Can anyone here PM me if they see it available to order on the website again? I will be checking often but I would hate to miss my chance again. Any help is appreciated!
Congratulations to all those that got their order in! Sure looks awesome. I dont have a 26 yet but this will force me to pull the trigger!
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Trying to have patience! Lol! People who ordered after me already have theirs and mine hasn’t even shipped yet!
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Trying to have patience! Lol! People who ordered after me already have theirs and mine hasn’t even shipped yet!
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I’m in the same boat as you Tommy. Guess we shouldn’t have added iGrill mounts when we ordered[emoji848]
Sent from my iPhone using Tapatalk
-
The GB arrived unharmed despite big gashes in the box. This thing is massive as this is my first 26” kettle. Such a nice color in person.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Very nice![emoji1312]
Mine are scheduled for delivery by the end of the day today.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Arrived! Unboxing ceremony happening later after work
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I'm really bummed the P shape vents didn't carry over to the new Glenn Blue 26 from the colored MT and SCG.
-
I'm really bummed the P shape vents didn't carry over to the new Glenn Blue 26 from the colored MT and SCG.
Do you feel that the vent shape makes that much of a difference? I have both a 22” OTG and a newer master touch, and I haven’t noticed much of a difference in my ability to control temps with either vent design.
-
I haven't played with it much, but the P shape can give you slightly more temperature control.
I wouldnt doubt if they eventually make it over to the 26 but why change it for this run? It clearly is going to sell itself on the color alone. Making the change now would just be an unnecessary expense.
After the glen blue is sold and gone that leaves them the opportunity to update/rework the 26er and give motivation for guys like us to purchase ANOTHER kettle. :pI'm really bummed the P shape vents didn't carry over to the new Glenn Blue 26 from the colored MT and SCG.
Do you feel that the vent shape makes that much of a difference? I have both a 22” OTG and a newer master touch, and I haven’t noticed much of a difference in my ability to control temps with either vent design.
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
How is the porcelain is it better applied than the Chinese LE red grill.
Sent from my SM-J700P using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Very nice![emoji1312]
Mine are scheduled for delivery by the end of the day today.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
More than one?
Sent from my SM-S727VL using Tapatalk
-
Very nice![emoji1312]
Mine are scheduled for delivery by the end of the day today.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
More than one?
Sent from my SM-S727VL using Tapatalk
@bladz loves those Taco handles so much he couldn't just have one. ;D
-
I'm really bummed the P shape vents didn't carry over to the new Glenn Blue 26 from the colored MT and SCG.
Do you feel that the vent shape makes that much of a difference? I have both a 22” OTG and a newer master touch, and I haven’t noticed much of a difference in my ability to control temps with either vent design.
I like it for the convenience of not having to fuss too much with the vents during low and slow cooks. I do feel i can get better control with the P vents on my MT.
-
I haven't played with it much, but the P shape can give you slightly more temperature control.
I wouldnt doubt if they eventually make it over to the 26 but why change it for this run? It clearly is going to sell itself on the color alone. Making the change now would just be an unnecessary expense.
I doubt it would've been an extra expense for Weber. They already have the die, machining, tools, and process in place to cut the P vents
-
It’s here ! FedEx backed in my drive and left it out in the rain in front of the garage door. They didn’t even ring the bell. He just drove off.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Dammit! Open the friggin thing!!!!!!!!!!!!!
-
Dammit! Open the friggin thing!!!!!!!!!!!!!
LOL
It’s killing me too but my wife actually bought this one. We were in the pool and she randomly stumbled upon it the day it came out.
I have to wait until after dinner now [emoji853]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
pics are looking good!
24 more hours ...
-
Poor girl has a busted wing :(
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Poor girl has a busted wing :(
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Oh my! This is not good!
Sent from my SM-S727VL using Tapatalk
-
My wife went from happy to sad [emoji20]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
More indoor pics. It’s kind of rainy here.
Even with the bent handle she is beautiful. It has some interesting colors for the handle print and the triangle. It’s kind of a light gunmetal finish if that makes sense. I’d have to see it outside.
The finish is very smooth like the ivory.
Now we have to deal with customer service but overall really happy with this one.
Oh by the way I’ve never had a new kettle that was perfectly round. The lid rocks one way but if I rotate it 90 degrees it sits fine. I usually just deal with it but being a 26er it might leak more than others.
What do you guys do for this ? My 18” WSM was the worst and I have it the bear hug treatment.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Dammit! Open the friggin thing!!!!!!!!!!!!!
LOL
It’s killing me too but my wife actually bought this one. We were in the pool and she randomly stumbled upon it the day it came out.
I have to wait until after dinner now [emoji853]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Congrats on receiving the new glen blue! Was the box visibly damaged anywhere?
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Someone pointed out that the new glen blue might have spin lines? Has anyone looked closely to see if that is the case?
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Besides I one spot (can't notice it it's on the underside of the handle) mine looks good. Only issue was I didn't have one of the clips in correctly on one of the legs so I had to reseat it. I'll take some pictures when I get it outside.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
It does have spin lines, pretty cool to see, I only can really see them on the bottom, not much on the lid
Someone pointed out that the new glen blue might have spin lines? Has anyone looked closely to see if that is the case?
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
[emoji41]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Dammit! Open the friggin thing!!!!!!!!!!!!!
LOL
It’s killing me too but my wife actually bought this one. We were in the pool and she randomly stumbled upon it the day it came out.
I have to wait until after dinner now [emoji853]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Congrats on receiving the new glen blue! Was the box visibly damaged anywhere?
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
That’s the funniest part. The box was not damaged at all. The handle was inserted in the corner cardboard support like it should be. I meant to check if the missing porcelain was in the box.
There’s not even a dent in the inside packaging.
My wife has spotted at least two on her Facebook kettle club that had damage by the handle. It’s not a defect but it’s actually bent somehow and the porcelain chipped off.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Very nice![emoji1312]
Mine are scheduled for delivery by the end of the day today.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
More than one?
Sent from my SM-S727VL using Tapatalk
@bladz loves those Taco handles so much he couldn't just have one. ;D
Btw, I do only have one. I was in contact with a friend when they became available again. My friend asked if I could order one since I was already logged in and had the screen up. So I helped him out.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
[emoji41]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Love [emoji3590] the vintage wheels on it!
Sent from my iPhone using Tapatalk
-
What’s the significance with spin lines?
-
What’s the significance with spin lines?
Back in the day, when the bowls were made, the steel disc was put on something like a lathe, It spun around and a tool basically pushed the steel disc into the shape.
Now basically they stick the piece of steel into a die and stamp it into the bowl or lid shape.
-
@getlego Looks like you'll be getting a 2nd bowl!
Love the spin lines and the retro wheels, which is what I plan for mine.
-
Got mine but I think I have some issues. See if you guys think I should be contacting Weber. Paint issues and handle is not even.
(https://uploads.tapatalk-cdn.com/20200722/e97a1f5a34452f5b675ccff74b92f3aa.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200722/e5c5b051e6ce5149052ee076b7f760ca.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200722/b713e1d206af157369f78769f4d21976.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200722/afb1241db03d9fd8db158d389460b086.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200722/c88ba88923ddcf02820d29a7ea1d2ff8.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200722/b15dad44dab529fbaa793ecc83f71e73.jpg)
Sent from my iPhone using Tapatalk
-
I’d get a replacement. That’s not really worthy of your $400 imho. The lack of blue inside a leg socket or on the handle is actually fairly normal, even on older kettles. The drip line off the handle and chips on the ash bucket tabs are just bad quality control to me.
Sent from my iPhone using Tapatalk
-
I’d get a replacement. That’s not really worthy of your $400 imho. The lack of blue inside a leg socket or on the handle is actually fairly normal, even on older kettles. The drip line off the handle and chips on the ash bucket tabs are just bad quality control to me.
Sent from my iPhone using Tapatalk
I agree. Was hoping I wasn’t overreacting. Thanks.
Sent from my iPhone using Tapatalk
-
I posted this in another thread, but I guess it belongs here. Of course I'm bummed, but I expect Weber will make it right, as they usually do. Warranty claim has begun.
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
So between damaged bowls and lids, who is going to be the first to build a glen blue 26 performer?
-
I’m beginning to have Red LE flashbacks.....sorry to those that received these kettles with defects. I’m 100% confident that Weber will make it right. They’ve always taken care of me and they stand behind their products!!! Best of luck to you all
-
I took a lot of pics and submitted to them. We'll see. Seems like more are showing up with defects than without.
-
Mine had similar paint issues on the ash bucket ring tabs just like one of the pics above, but that was the only thing I noticed. I didn’t think it was a huge deal
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Also mine came with the sweeps already attached. Maybe I’m just a rookie at putting together newer model kettles but that made it almost impossible to put the ash bucket ring on. I tried sliding the ring on over the sweeps handle but if I went any further and really tried to force the ring onto the bowl, I most definitely would have scratched the hell out of the bowl, so I wound up taking the sweeps off to put the ring on, then put the sweeps and handle back on. Maybe I’m showing my inexperience but that was my experience
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Received email confirmation that a new lid has been ordered for me. Weber rules.
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Yes same. Submitted the info and they’re sending a replacement lid, bowl, and handle kit 67569. Not sure what I need the handle kit for. As usual easy support claim process.
Sent from my iPhone using Tapatalk
-
Received email confirmation that a new lid has been ordered for me. Weber rules.
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Very nice. That’s a helluva scar on that lid
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
My ash catcher holder had similar marks, now I'm wondering if I should have documented all of this before assembly
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
So between damaged bowls and lids, who is going to be the first to build a glen blue 26 performer?
Don’t you mean Glen Blue Mini-Ranch? [emoji6]
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
My ash catcher holder had similar marks, now I'm wondering if I should have documented all of this before assembly
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
If you’re not satisfied, contact them. It’s easy through the website.
Sent from my iPhone using Tapatalk
-
I’m happy to say my Glen Blue arrived and it’s friggin beautiful! I feel fortunate that it arrived in good shape. Here she is amongst my Gen1 Master Touch and my Ranch. And of course there's the picture with covers so she doesn't draw my wife's attention. ;D
For those who might be wondering, I had a set of wheels from a red limited edition that I never used. I figured I'd do something different since I don't have anything more like the original wheels. Maybe someday.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I’m happy to say my Glen Blue arrived and it’s friggin beautiful! I feel fortunate that it arrived in good shape.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Handles look cool! Nice contrast between the wood and blue.
Sent from my iPhone using Tapatalk
-
This is my 1st time assembling a taco/ pop leg grill. The legs were a nuisance. PAM saved the day. The front leg nipple is buried somewhere within the tube and I'm leaving it. :)
I've always liked the Gen2 Performer wheels and I had a new extra pair, and I stuck a Zav on the front. Taco is on for now.
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I’m happy to say my Glen Blue arrived and it’s friggin beautiful! I feel fortunate that it arrived in good shape. Here she is amongst my Gen1 Master Touch and my Ranch. And of course there's the picture with covers so she doesn't draw my wife's attention. ;D
For those who might be wondering, I had a set of wheels from a red limited edition that I never used. I figured I'd do something different since I don't have anything more like the original wheels. Maybe someday.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Very nice! Mine is at home waiting in the box... hope it's as clean as yours. Similar handles are in the works from Marty and I like the wheel selection. I've got a set of those and may try them too.... Come on 5:00!
-
This is my 1st time assembling a taco/ pop leg grill. The legs were a nuisance. PAM saved the day. The front leg nipple is buried somewhere within the tube and I'm leaving it. :)
I've always liked the Gen2 Performer wheels and I had new extra pair, and I stuck a Zav on the front. Taco is on for now.
Really like those wheels. I was considering going with those too, but I went with the all blacks from a limited edition red that I already had. Otherwise, I would have gone with the Gen2 Performer wheels. Very sharp!
-
Just having her in the background makes me happy...exchanging glances
:o ::) :P
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
For everyone new to taco handles... Please do yourself a favor and replace the hardware with a fender washer on both sides top and bottom of lid and a keps nut. Especially with the heavy 26 lid. Or else you'll be kicking yourself when the porcelain pops off. I use a 1 1/4" OD x 1/4" ID stainless washer on both sides of lid with 1/4-20 stainless keps nut on all my taco handles. Very secure.
Sent from my Pixel 3 XL using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
This is my 1st time assembling a taco/ pop leg grill. The legs were a nuisance. PAM saved the day. The front leg nipple is buried somewhere within the tube and I'm leaving it. :)
I've always liked the Gen2 Performer wheels and I had new extra pair, and I stuck a Zav on the front. Taco is on for now.
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Really like the look of the wheels ! I never complain about Weber design but one of my least favorite things are the solid hubcaps. They look so much better with the whitewall look. Somebody here put vintage whites on and it looked fantastic.
I also had the problem with losing a leg pin. I realized watching some videos that this a new procedure. When I assembled my wife’s ivory they had us put the spring clip in the leg first. Now the spring clip goes in the socket first. Well it spun in there and now the pin is not locked. No big deal since I have to take it apart if we get a replacement bowl.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Upon closer inspection, it isn't just black enamel, definitely have some rust spots. Went ahead and submitted a ticket. Just glad Weber stands behind their grills.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Im in Vancouver and yes totally agree Darko but i would love one! Amazon down the road?
Good thing it isn't in Canada. Probably priced near 600 bucks.
Sent from my SM-G975W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G970W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Mine had similar paint issues on the ash bucket ring tabs just like one of the pics above, but that was the only thing I noticed. I didn’t think it was a huge deal
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Missing a little paint on the ash bucket tabs is a non issue to me also. They probably are all going to have that, it’s more than likely part of the baking process.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I'm so disappointed. Haven't been paying attention to much of anything lately. So would have loved to get one but only find out about it today! Ah well, wasn't meant to be I suppose :)
-
Unpacked and assembled mine last night. The box looked perfect and I unpacked it carefully and found a dime sized porcelain pop on the lid. Sigh. Also the ash sweep was installed with the handle on the left side instead of the right which I found out after installing the ash can holder and legs and turned it upright. No biggie there, took it back apart and corrected - all good. Similar missing blue porcelain on the ash bucket tabs, but appears to be black porcelain, not bare metal so no biggie for me. Grates don't seem to touch all 4 supports, so there's a bit of teeter totter there, maybe I will try to adjust them gingerly. Lid doesn't sit flat on the bowl, maybe the new replacement lid will. Yeah, I'm picky I guess but kinda wanted it to be perfect out of the box. Oh it does have some blue over spray in a couple of places inside the bowl which adds character IMO. Put the original wheels on, but looking for an alternative. I've seen some neat ideas here and on FB.
Registered it and contacted Weber this morning and they are sending me a new lid when they are in stock - 7/29/20 projected. Got a Slow N Sear XL which fits nicely, wood handles from Marty ordered with my "Handle" engraved (pun intended) and vent tabs and rollers coming from River City. Looking forward to getting all completed so I can have my first cook on a 26"!
-
Pics.....
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
It is likely that there will be another run. Keep checking their website and the forum. Honestly I wish they just done pre-orders on this and taken their time to get them out. I wonder how many were damaged in the storm that followed last Thursday.
Mine arrives today so fingers crossed that it is in mint condition. I'm so disappointed. Haven't been paying attention to much of anything lately. So would have loved to get one but only find out about it today! Ah well, wasn't meant to be I suppose :)
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Question for those of you with warranty claims: do you call, or just fill out the claim on the website?
-
At the moment I would probably call, but offer to send pictures. The response time on email claims seems to be a little hit or miss right now. I have used the email process though in the past and under normal circumstances it works pretty well.
Question for those of you with warranty claims: do you call, or just fill out the claim on the website?
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Question for those of you with warranty claims: do you call, or just fill out the claim on the website?
It really speeds the process up if you register the grill online before calling in IME. I called the Weber 800 number this morning at around 8:20, went to the warranty claims which I think is option 4, then used the call back feature by pressing 2. An agent called me back in about 30 minutes. I told him the problem, he sent me an email request for a proof of damage picture and I responded to the email while on the phone and he had an order in for a replacement lid in just a few minutes. Easy process this way and I received a confirmation email that the lid is ordered.
-
Question for those of you with warranty claims: do you call, or just fill out the claim on the website?
It really speeds the process up if you register the grill online before calling in IME. I called the Weber 800 number this morning at around 8:20, went to the warranty claims which I think is option 4, then used the call back feature by pressing 2. An agent called me back in about 30 minutes. I told him the problem, he sent me an email request for a proof of damage picture and I responded to the email while on the phone and he had an order in for a replacement lid in just a few minutes. Easy process this way and I received a confirmation email that the lid is ordered.
Cool, thanks. Hoping I won’t have to go through this process, but it helps to know what to do.
-
I have been on the phone with Weber 3 times in the last 2 months all them took numerous attempts and looooong wait times. I had to specifically ask for free shipping on a $160 order... was incorrectly told an issue I had wasn't covered and once was on hold for 2 hrs and then the call ended.
Yesterday I submitted 2 warranty claims online one I mentioned above one new one, attached the pics when I submitted. Just got an email for each issue this hr with confirmation that they are covered and shipping.
I Would definitely go online. Just be sure you get the email saying it was submitted. Normally I just call if I need anything but looks like I will be using the online form going forward.
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Question for those of you with warranty claims: do you call, or just fill out the claim on the website?
I did both, but finished online before I was ever connected. Don't waste your time on the phone. The website process works great. You'll get an email shortly after the claim is received. Just make sure you get the "your claim was successfully entered" (or whatever it says) after you hit the SUBMIT button.
-
Noticing on FB that the bowl handles on these are not centered with the front leg, but a bit to the right. This is my first 26" so I don't know if that's normal or not. Might be handy when pulling the grill right handed - walking forward with the grill behind you. Mine is the same as what I'm seeing.
-
So I got mine and with exception to attaching the lid handle it is assembled. I need to get some fender washers to give it a good grip on the lid.
I did not have any issues with my kettle. There were little tiny blemishes at the bottom where the bucket attaches, but i think this is either from rubbing against the grates in the box or just something that happens in manufacturing. Personally I just dabbed some high heat paint on those spots for rust prevention and no one will ever see it. I also noticed there was some spots under the rim of the bowl where the blue didn't cover, but again it wasn't bare metal and no one will ever see it. The legs were a bit of a bear to get into the sockets but this might be a good thing because it seems pretty solid and not wobbly. Just make sure you assemble on a nice blanket, mattress, or etc.
I want to remind everyone that those with chips and dings that it has nothing to do with the overall quality of the grill, but is most likely just something that is going to happen when packing and shipping a large kettle. This is probably Webers largest ship out in a week with a custom color so you are naturally going to see more of it now than in the past with everyone showing their new kettles as soon as they get them in this short window of time. My spring green came with a chip and blemish, but Weber warranties things well. Just try not to nit pick too much everyone. The last thing we want is Weber getting tired of us nit picking and to have them be less than awesome with claims or stop with the new colors all together.
As for the quality and look of this grill it is magnificent. The color is bright and vibrant and the spray on the glen blue color looks like it was done right. I have a red LE and this is definitely NOT like that. So if you are on the fence about ordering you need to clearly get on the BUY IT side of the fence. Otherwise you will grilling with myself or another WKCer and doing face palms the whole time because you could have ordered but didn't.
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Noticing on FB that the bowl handles on these are not centered with the front leg, but a bit to the right. This is my first 26" so I don't know if that's normal or not. Might be handy when pulling the grill right handed - walking forward with the grill behind you. Mine is the same as what I'm seeing.
My handle appeared to be center. It could be the camera angle or the way the legs are into the sockets needing a little twist or bend. I noticed one of my rear legs didn't look perfectly straight, but after getting it assembled it kind of corrected itself.
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Noticing on FB that the bowl handles on these are not centered with the front leg, but a bit to the right. This is my first 26" so I don't know if that's normal or not. Might be handy when pulling the grill right handed - walking forward with the grill behind you. Mine is the same as what I'm seeing.
Even Weber’s stock photo on their website shows that its offset a bit to the right. Appears to be perfectly normal. 8)
-
Noticing on FB that the bowl handles on these are not centered with the front leg, but a bit to the right. This is my first 26" so I don't know if that's normal or not. Might be handy when pulling the grill right handed - walking forward with the grill behind you. Mine is the same as what I'm seeing.
Even Weber’s stock photo on their website shows that its offset a bit to the right. Appears to be perfectly normal. 8)
Good find! I guess it's normal then. Kinda makes sense if you're dragging it around as long as you're right handed which I am not lol....
-
So I got mine and with exception to attaching the lid handle it is assembled. I need to get some fender washers to give it a good grip on the lid.
I did not have any issues with my kettle. There were little tiny blemishes at the bottom where the bucket attaches, but i think this is either from rubbing against the grates in the box or just something that happens in manufacturing. Personally I just dabbed some high heat paint on those spots for rust prevention and no one will ever see it. I also noticed there was some spots under the rim of the bowl where the blue didn't cover, but again it wasn't bare metal and no one will ever see it. The legs were a bit of a bear to get into the sockets but this might be a good thing because it seems pretty solid and not wobbly. Just make sure you assemble on a nice blanket, mattress, or etc.
I want to remind everyone that those with chips and dings that it has nothing to do with the overall quality of the grill, but is most likely just something that is going to happen when packing and shipping a large kettle. This is probably Webers largest ship out in a week with a custom color so you are naturally going to see more of it now than in the past with everyone showing their new kettles as soon as they get them in this short window of time. My spring green came with a chip and blemish, but Weber warranties things well. Just try not to nit pick too much everyone. The last thing we want is Weber getting tired of us nit picking and to have them be less than awesome with claims or stop with the new colors all together.
As for the quality and look of this grill it is magnificent. The color is bright and vibrant and the spray on the glen blue color looks like it was done right. I have a red LE and this is definitely NOT like that. So if you are on the fence about ordering you need to clearly get on the BUY IT side of the fence. Otherwise you will grilling with myself or another WKCer and doing face palms the whole time because you could have ordered but didn't.
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
No sign of a single porelain flake in the box that mine came in. The box was in perfect shape too. I have to believe that mine was packed with the defect - but I'm not miffed about it, just sharing my experience. They have been very responsive to the issue and are taking care of it which I applaud. Now I have a free spare lid which is nice.....
-
Only part that worries me about my handle crack is if the handle is weakened or has a defective weld.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I am pleased to report that my Glen Blue arrived in perfect condition! I was able to enjoy a cool brew after assembling instead of dealing with Weber customer service. I feel bad that some of you guys had quality issues. (https://uploads.tapatalk-cdn.com/20200724/c136815e15409d8aad79ead2e0ffd04f.jpg)
Sent from my SM-S727VL using Tapatalk
-
Noticing on FB that the bowl handles on these are not centered with the front leg, but a bit to the right. This is my first 26" so I don't know if that's normal or not. Might be handy when pulling the grill right handed - walking forward with the grill behind you. Mine is the same as what I'm seeing.
Doesnt look normal to me. Looks cattywompus. Weber.com top down view of the black 26 grill clearly shows the front leg through the handle centered. On GB 26er it’s mysteriously not seen. Was this photoshopped out to hide a production flaw?
-
Still waiting on mine. Scheduled delivery is today, but that seems highly unlikely, as tracking shows it in the middle of freaking nowhere in Minnesota as of a couple hours ago. This is some of the weirder shipping activity I’ve seen for something I’ve ordered before; it apparently spent 4 days going in a circle in Illinois.
I figure I’ll get it eventually, but if the tracking is accurate, I’ll be surprised if it shows up before August
-
Im in Vancouver and yes totally agree Darko but i would love one! Amazon down the road?Good thing it isn't in Canada. Probably priced near 600 bucks.
Sent from my SM-G975W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Weber told me that I could order one no problem.
Sent from my SM-G970W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Mine arrived safely with no popped porcelain. Whew.
-
I just opened the box and am very diasappointed with major paint defects around both sides of the handle on the bowl (for some reason, I can't post a picture; too large?). I've seen quite a bit of irregularities around the internet with these. I don't understand how so many of these get sent out damaged. I've already registered the grill, put in my claim and within minutes they responded and ordered a new bowl. However, the bowl is not currently available, so who knows? Hopefully, they'll send me a replacement bowl soon. Customer service is world-class, but it seems as though quality control is abysmal, from what I've seen and experienced. I once ordered a replacement lid for my WSCG and the one they sent had a large dent in it. That required a third lid. They happily send them, but it's very disappointing and a hassle to continually have to contact customer service about poor quality.
-
i'd love for someone to actually gather the numbers before declaring quality control issues.
Anyone have any idea how many have shipped?
I know its easy to fall prey to the "My grill is broken. Your grill is broken. ALL THE GRILLS MUST BE BROKEN!" mentality, but it's anecdotal and not accurate or healthy.
-
I’ve had numerous interactions regarding Weber grills, both new and almost new. There is no other company I’ve had to deal with as many times about quality issues, and I’m a loyal brand guy for more brands than Weber. Even if it were just mine, it’s too many because it left the factory in that condition. I’m not considering shipping damage. I just don’t see how mine could have left the factory in such condition. It doesn’t matter how many; NOT one should leave the factory with paint deficits.
-
@Darko Weber Canada told you they would order you one????
I emailed and recieved a response saying it would not be offered in Canada?!
Im in Vancouver and yes totally agree Darko but i would love one! Amazon down the road?Good thing it isn't in Canada. Probably priced near 600 bucks.
Sent from my SM-G975W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Weber told me that I could order one no problem.
Sent from my SM-G970W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I’ve had numerous interactions regarding Weber grills, both new and almost new. There is no other company I’ve had to deal with as many times about quality issues, and I’m a loyal brand guy for more brands than Weber. Even if it were just mine, it’s too many because it left the factory in that condition. I’m not considering shipping damage. I just don’t see how mine could have left the factory in such condition. It doesn’t matter how many; NOT one should leave the factory with paint deficits.
i'm fine with your standards and your philosophy on brands and quality, sounds like a perfect world you're living in.
I'm just saying it's super common for us Weber enthusiasts to speak of issues as a catastrophic failure and tell a narrative of "all the grills are bad" because "it's all I see"
The same thing happened with the LE Red.
-
My 26 glen blue arrived with NO issues on Thursday and I did my first cook on Friday
-
@Darko Weber Canada told you they would order you one????
I emailed and recieved a response saying it would not be offered in Canada?!
Im in Vancouver and yes totally agree Darko but i would love one! Amazon down the road?Good thing it isn't in Canada. Probably priced near 600 bucks.
Sent from my SM-G975W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Weber told me that I could order one no problem.
Sent from my SM-G970W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Well earlier this week I ordered a bunch of parts to make a copper mastertouch. I asked about the blue and was told that yes, I could put an order in, and that I would get it. Perhaps this was a customer service rep being nice to me, I don't know.... I'll try to order one at the end of the month when the new batch comes. We'll see what happens
-
Well, I called weber today to order some more parts. I asked again. I was told again, yes I can order a glen blue from Canada.
Sent from my SM-G975W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Hey, don't get me wrong, I love Weber products. That's why I'm here. I have absolutely no need for another 26" kettle, but I ordered glen blue because of the historic and iconic nature of the color. And again, I think their customer service is awesome. I just don't understand how a $400 item leaves the factory with blatant and obvious defects. I saw pictures of some others that were even more egregious than mine. It's very frustrating and disappointing to open up the box and I have to wait because the bowl is not available now.
I’ve had numerous interactions regarding Weber grills, both new and almost new. There is no other company I’ve had to deal with as many times about quality issues, and I’m a loyal brand guy for more brands than Weber. Even if it were just mine, it’s too many because it left the factory in that condition. I’m not considering shipping damage. I just don’t see how mine could have left the factory in such condition. It doesn’t matter how many; NOT one should leave the factory with paint deficits.
i'm fine with your standards and your philosophy on brands and quality, sounds like a perfect world you're living in.
I'm just saying it's super common for us Weber enthusiasts to speak of issues as a catastrophic failure and tell a narrative of "all the grills are bad" because "it's all I see"
The same thing happened with the LE Red.
-
Here is my thought process on ther damaged 26'rs.
First of all, it is boxed in a large cumbersome box. A large cumbersome box that weighs 63 pounds.
What's the easiest way to move that box around? On its SIDE.
The further these boxes have to travel, the more they are handled by diffrent people.
Just because the box doesn't get damaged, doesn't mean someone along the line didn't drop it, or have it slip out of their hands.
Take a brand new 22" still in the box, and drop it on its side a couple times, and tell me it's gonna come out of the box perfect.
Hell, take a vintage kettle and put it packed in that same box, with the Weber packaging.... I bet it would get damaged just the same.
Now add the fact that the 26'r weighs 63 pounds shipped, when that drop / mishandle happens, that grill is gonna get DAMAGED.
A drop on the flat side won't neccesarily damage the box.
I feel most of the defects are a result of shipping. [emoji2369]
Attached is a pic of mine when it was delivered..... on its side.
I feel pretty confident that 99% of these grills that had to be handled by 1 person, it was handled on its side, where the actual grill sits closest to the cardboard box.
Sent from my SM-G950U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I heard a THUNK! on the front porch when my GB was delivered, and the box was on its side.
The damage was shown in pics above (pg.11)- a ding w/ porcelain loss on the lid rim- which could have happened during shipping, although no porcelain bits were found in the box.
As with the controversy during the release of the Smokefire Pellet grill, who knows what the % of miscues really is?
As long as they "happily" honor the warranty, I'm fine.
Speaking of which, do I recall Weber was reluctant to replace some of the defected Red LEs from a couple years ago?
-
Mine was delivered on its side as well. I haven't unboxed it yet to see if its damaged.
-
Had to tell from my pic, but smokes a rollin on the big girl's maiden voyage. Beautiful hot day in Northern Illinois. (https://uploads.tapatalk-cdn.com/20200726/cd024dc0d5fa35e67e1ecd368bc26f5a.jpg)
Sent from my SM-S727VL using Tapatalk
-
I have to say I am mesmerized by the color of the new Glen Blue 26..... Sunny day, great photo opportunity....Glen Blue 26”, Wedgewood Blue SJ, custom painted Glen Blue lantern, Ivory Master Touch and SJ and white lantern. Didn’t realize such a difference in the blues until they were side by side out in the sun. Cool little family here. Oh yeah, also the 22” WSM over there wondering what’s the big friggin deal....
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
@bamakettles
Cool freaking pics !
Have you cooked on your 26 glen blue?
I like your tricked out wsm, my 18” & 22” are stock.
-
@bamakettles
Cool freaking pics !
Have you cooked on your 26 glen blue?
I like your tricked out wsm, my 18” & 22” are stock.
Thanks! No, I’ve not cooked on it just yet. Handles should be here tomorrow and the replacement lid won’t be here till next month and cover is ordered. Will plan something soon - in a holding pattern right now. Color is amazing out in the sun!
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I know I’m late to the party but it took a little longer to make it to California I guess. She made it in one piece no dents or scratches I’m really excited to cook on her tomorrow not sure what I want to do
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
A fine compliment to any decor. :)
-
Looking good blu! Mine's next to the fireplace right now as well lol.......
-
Mine's next to the fireplace right now as well lol.......
My wife won't let the kettles in our house! lol
Glen blue 26er was singing in the rain, smoking two racks of ribs and baked beans Sunday afternoon.
-
Mine's next to the fireplace right now as well lol.......
My wife won't let the kettles in our house! lol
Glen blue 26er was singing in the rain, smoking two racks of ribs and baked beans Sunday afternoon.
Those Florida rains....... I think it rains harder there than any place I've ever been. Ribs and beans look amazing!
-
My first 26” kettle. I’ve never had so much room in a Weber before.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
My first 26” kettle. I’ve never had so much room in a Weber before.
My first 26" kettle as well.
Nice looking ribs and beautiful garden.
-
Congrats to all the lucky new owners - such a sweet rig!
@Darko
Sadly no love for us here up north - rep attempted to order for me but the system wouldn't allow it.
-
@SixZeroFour couldn't one of the local WA guys near the border agent one for you online once stock is available again and you guys arrange for pickup on this side of the border?
-
@SixZeroFour couldn't one of the local WA guys near the border agent one for you online once stock is available again and you guys arrange for pickup on this side of the border?
The border is probably still closed, but that would be nice for our friends up north
Sent from my SM-G975U using Tapatalk
-
Looks nice on the patio! About to fire it up! Love the color.
(https://uploads.tapatalk-cdn.com/20200727/712ceb94b5ef48f17f77294a4d997b83.jpg)
Sent from my iPhone using Tapatalk
-
Looks nice on the patio! About to fire it up! Love the color.
(https://uploads.tapatalk-cdn.com/20200727/712ceb94b5ef48f17f77294a4d997b83.jpg)
Sent from my iPhone using Tapatalk
Looks really nice back there. Reminds me of a new Cadillac back in the day.
-
Cadillacs usually has areas covered in white and wood grain.... Wait a sec
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
My vintage take on the new Glen blue
Original Weber wood handles
Off White wheels
Off White ashbucket
Might look st making some wood rollers or might just grab some gray/white ones off an older kettle.
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
My vintage take on the new Glen blue
Original Weber wood handles
Off White wheels
Off White ashbucket
Might look st making some wood rollers or might just grab some gray/white ones off an older kettle.
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
That looks sharp!
Sent from my SM-S727VL using Tapatalk
-
Finally got mine! A few small imperfections upon first glance; not sure it’s worth the warranty claim.
All of the leg sockets and ash holder tabs have chips in the porcelain on the ends. And there is a small dent/missing porcelain chunk on the underside of the bowl rim. Not visible from the top.
So: get some high temp paint and dab those small problem areas to seal them? Or request a new bowl?
-
I went ahead and got paint, 1/2 pint of high heat and some fine brushes.
Sent from my Pixel 2 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Finally got mine! A few small imperfections upon first glance; not sure it’s worth the warranty claim.
All of the leg sockets and ash holder tabs have chips in the porcelain on the ends. And there is a small dent/missing porcelain chunk on the underside of the bowl rim. Not visible from the top.
So: get some high temp paint and dab those small problem areas to seal them? Or request a new bowl?
If it is minimal on the tabs/leg sockets I would just get some high heat paint and dab some paint on two or three times. No one will probably ever see it and it seems fairly common. As for the underside of the bowl it is kinda up to you and hard to say without seeing it personally. The underside of the bowl rim on mine had a few spots were the blue didn't cover completely, but it wasn't bare metal so I wasn't concerned.
-
Mine's next to the fireplace right now as well lol.......
My wife won't let the kettles in our house! lol
Glen blue 26er was singing in the rain, smoking two racks of ribs and baked beans Sunday afternoon.
@AZ2FL , what are you using for the ash bucket on 18?
Sent from my LM-X420 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Got to say, I’m on the fence. I have two 26’ers that are near and dear to my heart (In fact the are my everyday machines). While I love the color, I’m may just sit back and hope for a rebound. Who knows, if the GB is successful, the may offer up a yellow or true lime 26er in the near future.
I would jump at either!!!!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Mine's next to the fireplace right now as well lol.......
My wife won't let the kettles in our house! lol
Glen blue 26er was singing in the rain, smoking two racks of ribs and baked beans Sunday afternoon.
@AZ2FL , what are you using for the ash bucket on 18?
Sent from my LM-X420 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I use stainless steel mixing bowls for ash pans, I’ve been using them for over 11 years now, they work grate.
18” = four quart, diameter at top lip is 10-5/8”
22” = eight quart, diameter at top lip is 13-3/8”
-
Pulled everything out to assemble, and find that it’s missing the front leg entirely. So that kind of puts a damper on things. Also the lid vent won’t close at all because the holes have really rough and sharp ridges where they were stamped/cut/whatever and the damper hangs up on them.
Warranty form, here I come...
-
The off white and wood definitely give it that vintage vibe
My vintage take on the new Glen blue
Original Weber wood handles
Off White wheels
Off White ashbucket
Might look st making some wood rollers or might just grab some gray/white ones off an older kettle.
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G973U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Congrats to all the lucky new owners - such a sweet rig!
@Darko
Sadly no love for us here up north - rep attempted to order for me but the system wouldn't allow it.
Call the 1-800 number. That's how I was told to order it ....twice.
-
Just have to say that Weber is awesome. I’ve never needed to deal with Customer Service before now, but they make the experience pretty painless and they just make things right.
-
Glen Blues no longer on weber.com. Anyone know if they are bringing them back?
-
Glen Blues no longer on weber.com. Anyone know if they are bringing them back?
https://www.weber.com/US/en/grills/charcoal-grills/original-kettle-series/16417001.html?cgid=217#start=1
-
I was told it is coming back.
Sent from my SM-G975W using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Patience Grasshopper
Sent from my SM-G975U using Tapatalk
-
Did her first cook tonight this is my first new grill I’m so happy. Took the recipe from the Weber app :)
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I was so excited to get a Glen Blue 26er. But then it arrived. The other day after a very trying summer...which I won't go into here...I got back and decided to put it together on Sunday.
I'm going to make this brief. One of the brackets on the bowl that holds the ash pan was bent. The gap where the ring was supposed to be was so small I couldn't get the tab through. Only two of the the three tabs on the ring would go through. Then I noticed a large area of porcelain missing under the lip of the bowl. It wasn't in a noticeable area, but it was there.
I filed a claim with pics via the Weber site after registering the grill. There are no bowls available at the moment, so I'm in limbo. Today, just for kicks, I decided to put the taco handle on the lid. I apparently never looked at it all that closely on Sunday in my original excitement to have a Glen Blue 26er. Sure enough, there's a quarter-third inch spot of missing porcelain on the side. So very frustrated, so I put in another request to Weber customer service today. I don't want to take advantage, and I have seen other's posts on here about problems, but I hope Weber makes this right as I want them to keep making cool new colors...but at the same time, I want them to be done right the first time.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Looks about like my lid.....i've contemplated using the original lid and naming the grill Marylin. Pop is down and to the right of the vent on mine. ; ) Good luck!
-
Luckily scored a fire pit cheap, for the handles. Just a little bend on the vice and voila...
...adios, taco! ;)
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Meant to post this pic:
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Nice.... this is my first 26 and have been working out so I can lift the lid during cooks lol.....
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Luckily scored a fire pit cheap, for the handles. Just a little bend on the vice and voila...
...adios, taco! ;)
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
The wood looks nice!
Sent from my SM-S727VL using Tapatalk
-
I filed a claim. I’m so happy with the grill, I feel guilty. My lid was scuffed and I found rust around the grate straps during unboxing. Weber is sending me a new bowl and lid. Weber’s customer service is by far the best compared to any company. The bowl may not be a huge deal to many people but I’d rather know for $400 I got a spare bowl in the garage if this one rust through. I hope the Glen Blue is just the beginning.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Love those spin lines!
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I really do not think that is rust around the grate straps. I believe it is just a light coat of porcelain transitioning to bare metal because it is a tricky area to spray 100% coverage without globbing tons of porcelain around the straps. It doesn't appear to be out of the ordinary because I found similar spots on my glen blue 26 bowl and on a clean spring green 22 bowl. I have had the spring green since December and if it was rust I figure it would have affected the bare metal around that transition area by now. I wouldnt doubt if someone with a NIB 70s kettle would find a similar spray pattern even back then. I am not criticizing anyone who was genuinely concerned by this, but I bet if everyone looks at their kettles a very large percentage of them will find something similar and it is very likely normal.
The grate straps will always be a weakness of the kettle even with 100% coverage unless they modify the bowl design to work like the ranch with a lip securing the grates rather than a strap. My advice would be to brush a bit of olive oil around your straps to treat any small amounts of bare metal and get to cooking.
I get it when there are obvious issues of chips and blemishes on a kettle as I have received a kettle in the past with these issues. However, I feel like all of the pictures and hype of this kettle all within a short period of time has every single person taking a magnifying glass to every square inch of the kettle. I mean I would love to pretend that my personal kettle was sprayed to perfection by the Michelangelo of porcelain spraying, but at the end of the day it is that guy Steve on the assembly line. Steve may not be Michelangelo, but he still did a hell of a job in making a beautiful kettle.
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I really do not think that is rust around the grate straps. I believe it is just a light coat of porcelain transitioning to bare metal because it is a tricky area to spray 100% coverage without globbing tons of porcelain around the straps. It doesn't appear to be out of the ordinary because I found similar spots on my glen blue 26 bowl and on a clean spring green 22 bowl. I have had the spring green since December and if it was rust I figure it would have affected the bare metal around that transition area by now. I wouldnt doubt if someone with a NIB 70s kettle would find a similar spray pattern even back then. I am not criticizing anyone who was genuinely concerned by this, but I bet if everyone looks at their kettles a very large percentage of them will find something similar and it is very likely normal.
The grate straps will always be a weakness of the kettle even with 100% coverage unless they modify the bowl design to work like the ranch with a lip securing the grates rather than a strap. My advice would be to brush a bit of olive oil around your straps to treat any small amounts of bare metal and get to cooking.
I get it when there are obvious issues of chips and blemishes on a kettle as I have received a kettle in the past with these issues. However, I feel like all of the pictures and hype of this kettle all within a short period of time has every single person taking a magnifying glass to every square inch of the kettle. I mean I would love to pretend that my personal kettle was sprayed to perfection by the Michelangelo of porcelain spraying, but at the end of the day it is that guy Steve on the assembly line. Steve may not be Michelangelo, but he still did a hell of a job in making a beautiful kettle.
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I hear ya. It’s definitely oxidized metal. Weber didn’t like it either apparently or they wouldn’t have offered to send a new bowl. And honestly I would have been fine with that decision. I questioned it while filing my warranty claim for the lid and damaged leg. Maybe Steve was having a bad day because the NIB performer bowl I have in the garage has a lot better coverage under the grate strap.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
When did the handle bracket lose those 2 nips that helped stabilize it? Was there a handle change or something? These dang newfangled grills have me all atwitter. Or...is my bowl flawed???!!! :/
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
When did the handle bracket lose those 2 nips that helped stabilize it? Was there a handle change or something? These dang newfangled grills have me all atwitter. Or...is my bowl flawed???!!! :/
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
That’s how they come. The standard handles are like clamshells and don’t need nubs.
Sent from my iPhone using Tapatalk
-
Those nibs disappeared years ago. I think around 2012
-
Thanks guys....figures I missed the change.
Sent from my SM-A102U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Got mine! Made some slight adjustments - Topper and Weber in-lay @zavod44 handles, the LE thermo bezzle, wide profile white wall wheels, and an older style ash pan. 8)
Sent from my Razr flip phone using a Sweet Glen Blue 26! (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Beautiful, love what you did with the handle!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I like it @Bob BQ
-
I also added the LE bezel to mine, but Bob beat me to it. [emoji14] Looks good man!
FYI if anyone else is looking to do this mine required making the small slot that keeps the thermometer up right a little wider on the LE bezel. You can use a small drill bit or file to widen it out slightly.
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
@Bob BQ did you use a fireplace handle on top?
-
@Bob BQ did you use a fireplace handle on top?
@Jason - Absolutely! It requires a little persuasion to fit on the taco, and you need to be extra careful when tightening it, but I like the look... and the fact that I can use my older @zavod44 handles.
-
Finally got a chance to cook on her tonight!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Those wings look grate Tommy
Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Those wings look grate Tommy
Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Thanks Karl! Tasted great too!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Finally got a chance to cook on her tonight!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Wings are a worthy way to break in a grill
Sent from my LM-X420 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Hey, so I’ve been waiting for my replacement wheels to arrive before assembling the grill, and what do you all recommend for fixing the taco handle? I mean, I’ve seen some of you use washers and different nuts in order to better protect the porcelain. I haven’t been able to go to the hardware store to find anything (isolation) so specific sizes would help so that I can order them online.
-
Lowbrass - looks grate! Question on your chimneys, what's going on with the double stack? Haven't seen that before.
Finally got a chance to cook on her tonight!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
When your chimney is taller your charcoal lights faster. Some people will make custom chimneys 2 feet tall. A lot of people just throw a spare on top of the one they have lit.
Lowbrass - looks grate! Question on your chimneys, what's going on with the double stack? Haven't seen that before.Finally got a chance to cook on her tonight!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Very Nice. Thanks!
When your chimney is taller your charcoal lights faster. Some people will make custom chimneys 2 feet tall. A lot of people just throw a spare on top of the one they have lit. Lowbrass - looks grate! Question on your chimneys, what's going on with the double stack? Haven't seen that before.Finally got a chance to cook on her tonight!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G981U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G965U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
It’s been a while, but I gotta say I love it!
Little tweaks: handle strap, wood, ash bucket, and left the hub caps off
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
It’s been a while, but I gotta say I love it!
Little tweaks: handle strap, wood, ash bucket, and left the hub caps off
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
That looks really good!
Sent from my SM-S727VL using Tapatalk
-
Different light
Pictures really don’t do it justice
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Different light
Pictures really don’t do it justice
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
She’s a beauty!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)