Weber Kettle Club Forums
Grill Talk => Gas Grills & Electric Kettles => Topic started by: WNC on March 24, 2020, 11:29:14 AM
-
Does anyone know it the manifold on a genesis silver b/c are interchangeable with a genesis 2000?
Thanks in advance!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
@Dave in KC he will know or @LightningBoldtz
-
I am not positive on this but the grills with the double flavorizer bars, I think the valves are spaced differently and they have longer valve stems. Also the burner tubes are different lengths.
I Frankensteined a few years back. Not fresh in my mind at the moment.
Sent from my SM-G960U using Tapatalk
-
I think Kneab is correct. I don't think one manifold will fit on the other and vice versa.
-
No, they are not interchangeable as has been mentioned above.
What specifically are you looking for/to achieve?
-
No, they are not interchangeable as has been mentioned above.
What specifically are you looking for/to achieve?
Hey guys thanks for your responses!
I picked up that genesis 2000 and I’m excited about rebuilding it. I had grabbed the genesis b for free but when the other popped up, well you guys know...
Anyway it looks like they rigged the hose up in some way that I don’t really trust (I’ll attach some pics) They used a hose clamp and maybe some glue in there, not really sure.
So I was thinking I could just swap out the manifolds, but I guess not.
Is it possible to switch out the treaded part (that the hose attaches to)? If so how do you get them out?
Also it looks like there is a plug in there for where a line would’ve run to a side burner. Is that okay?
Sorry for all the questions, this is my first genesis rebuild, so any help/advice is really appreciated.
Thanks again guys!
Oh and it also had a bunch of different regular hoses!?!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
That plug is normal, it is for the side burner. I would not use the hose clamp setup. The fitting should unscrew. Are both of the manifolds you have for Lp? Do you have a good regulator to use?
Sent from my SM-G960U using Tapatalk
-
That plug is normal, it is for the side burner. I would not use the hose clamp setup. The fitting should unscrew. Are both of the manifolds you have for Lp? Do you have a good regulator to use?
Sent from my SM-G960U using Tapatalk
I do think they are both LP
How can you tell if a regular is good or not?
Thanks
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
I think the only problems you would experience with a bad regulator would be too little heat(less than 550°) too much heat(way over 550°) or losing gas without using it. There is a vent hole on the regulator about the size of a pencil tip. Propane should not come from it.
Sent from my SM-G960U using Tapatalk
-
Well I think I got it!
Replaced the old connection with the one off the silver, used yellow gas tape, checked for leaks, and it seems to be working fine!
Lots left to do, but I’m so glad to know it works
Tons of cleaning left and the wood is further gone than I’d like. I’ll probably just lightly sand and re-stain until I can get new wood.
It’ll also need the bottom drip pan, the larger black one. Anyone happen to have one laying around? Happy to trade for one 🤞[emoji3]
Thanks! Super excited about bringing this one back to life!
High and low temps in the pics for reference
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
@WNC that's going to be a nice addition to that beautiful cooking area you have
-
@WNC that's going to be a nice addition to that beautiful cooking area you have
Thanks! (It looks even better now that we’re done painting [emoji3])
Yeah, super excited about getting it into the mix!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Just got done cutting and staining new wood
This is what the current wood looks like
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Looks awesome
Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
Just got done cutting and staining new wood
This is what the current wood looks like
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
can you make me a set
-
Just got done cutting and staining new wood
This is what the current wood looks like
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
can you make me a set
I’d be happy too
But this was the last of my wood. I had some leftover cedar from another project, in fact was looking at what was left for the swing up tables and I only have enough for five more pieces...so no swing up
Plus I had to borrow my neighbor’s chop saw and I just returned it
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Oh snap, that looks sweet!
-
That looks great.
Nice Job [emoji106]
Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)