Weber Kettle Club Forums

Grill Talk => Weber Grill Forum (Grills, Accessories) => Topic started by: Webster on December 18, 2015, 07:25:01 AM

Title: To paint or not to paint?
Post by: Webster on December 18, 2015, 07:25:01 AM
     I was wondering where people stand with touching up or repainting a kettle? I have a yellow kettle that has some scratches and small cracks on the bowl,the lids fine it has a few dings.The bowl looks like it might have rolled a few times?Now I don't mind the ding marks on the lid or bowl,that gives the old kettles character.I think this kettle would clean up great if I repainted the bowl.
     I can't find any reviews from members who have painted their kettles and reported on the results? Does the paint hold up?I know how rare yellow kettles are,so I don't want to do anything that would make things worse.Help a brutha out.Thanks.
Title: Re: To paint or not to paint?
Post by: firedude5015 on December 18, 2015, 07:38:10 AM
Personally, I wouldn't paint it. Season the bare spots with oil to prevent rust, and cook away.
My redhead and my "83 blackie have some porcelain damage, i seasoned and use the heck out of them...battle scars and all.
Just my opinion. Others may be different
Title: To paint or not to paint?
Post by: brewtownbeatdown on December 18, 2015, 07:46:30 AM
As an owner of a yellow, I wouldn't do it. You won't get to experience the fade if you do. After cleaning the bowl, I did touch a couple spots that had been primed/ painted by a prior owner. Only because the primer was embedded in the rough spots & I didn't want to wear a hole in the bowl trying to clean it out. Eventually the spots will fade to a light yellow. (http://images.tapatalk-cdn.com/15/12/18/c1152ffcc209785049678bdb386f4ece.jpg)(http://images.tapatalk-cdn.com/15/12/18/3238228a43488723bbc4401921bb40cb.jpg)


Sent from my iPhone using Tapatalk
Title: Re: To paint or not to paint?
Post by: Troy on December 18, 2015, 07:46:53 AM
Many of us have tried in the past, but nothing holds up and matches perfectly.
Engine enamels will turn black because kettles get hotter than engines apparently.

If you're going to try, look for a caliper paint or flame proof paint - like this one. http://amzn.to/1Ocil2B

I mask everything off and put multiple thin layers on the wounds. I think @Jeff just sprays it on and uses steel wool to clean up after (i could have my people mixed up though)
Title: Re: To paint or not to paint?
Post by: dazzo on December 18, 2015, 07:47:55 AM
Thinking: "Put it on ebay"

Saying: "Don't paint it. It just doesn't work. Just use it."
Title: Re: To paint or not to paint?
Post by: MikeRocksTheRed on December 18, 2015, 08:16:26 AM
Many of us have tried in the past, but nothing holds up and matches perfectly.
Engine enamels will turn black because kettles get hotter than engines apparently.

If you're going to try, look for a caliper paint or flame proof paint - like this one. http://amzn.to/1Ocil2B

I mask everything off and put multiple thin layers on the wounds. I think @Jeff just sprays it on and uses steel wool to clean up after (i could have my people mixed up though)

This might do the trick as long as you pay attention to the curing process.  Would probably need an IR thermometor to monitor the temp of the kettle, and need to use coal  baskets so you can remove the coals when the temp hits those curing temps.
Title: Re: To paint or not to paint?
Post by: Jeff on December 18, 2015, 08:19:53 AM
For grills I don't plan on cooking on, I'll try and touch them up if the chip(s) are in high vis areas that bother me.  And yes, its near impossible to find exact paint matches.  For example, there are at least 5-7 variations of shades of red I've seen...then add in if there is a fade to the lid.  It's tough.  With many grills, I'll simple clean the chipped area, sand/dremel off the rust that may have formed.  I've even gone so far as to use Bondo automotive finishing putty to fill in the chipped areas first prior to touching up. Then I'll spray BBQ black high temp paint (without masking), then clean the overspray with 0000 steel wool right to the edge of the chip.  In my opinion, it looks cleaner (and easier to look at) than a big rusty chip. 
To each there own though.  Depends how anal you are.  For me, I'm extremely OCD with the appearance of my grills.

(http://i442.photobucket.com/albums/qq142/A_Tame76/Yellow%20Ranger%20rehab/yellowrehab003.jpg)

(http://i442.photobucket.com/albums/qq142/A_Tame76/Yellow%20Ranger%20rehab/yellowrehab008.jpg)

(http://i442.photobucket.com/albums/qq142/A_Tame76/Yellow%20Ranger%20rehab/YelllowRangerrehabbottomuntouched.jpg)

(http://i442.photobucket.com/albums/qq142/A_Tame76/Yellow%20Ranger%20rehab/YellowRehab010.jpg)

(http://i442.photobucket.com/albums/qq142/A_Tame76/Yellow%20Ranger%20rehab/YellowRehab020.jpg)
Title: Re: To paint or not to paint?
Post by: Bob BQ on December 18, 2015, 09:22:10 AM
@SixZeroFour clued me in to a pretty good yellow kettle match with this paint. Couldn't find his original yellow RRR post.

Hey Bob - here is the paint I used... It's not perfect but pretty darn close.

(http://images.tapatalk-cdn.com/15/08/17/8688bf82b776ec25b973cca29e94897b.jpg)

Code on the can is CDE1642 - Daytona Yellow
Title: Re: To paint or not to paint?
Post by: Troy on December 18, 2015, 09:34:26 AM
@SixZeroFour clued me in to a pretty good yellow kettle match with this paint. Couldn't find his original yellow RRR post.

Hey Bob - here is the paint I used... It's not perfect but pretty darn close.

(http://images.tapatalk-cdn.com/15/08/17/8688bf82b776ec25b973cca29e94897b.jpg)

Code on the can is CDE1642 - Daytona Yellow

Good call.
Any issues with burning if you go hotter than 500?
500 isn't very hot
Title: Re: To paint or not to paint?
Post by: Troy on December 18, 2015, 09:46:03 AM
Many of us have tried in the past, but nothing holds up and matches perfectly.
Engine enamels will turn black because kettles get hotter than engines apparently.

If you're going to try, look for a caliper paint or flame proof paint - like this one. http://amzn.to/1Ocil2B

I mask everything off and put multiple thin layers on the wounds. I think @Jeff just sprays it on and uses steel wool to clean up after (i could have my people mixed up though)

This might do the trick as long as you pay attention to the curing process.  Would probably need an IR thermometor to monitor the temp of the kettle, and need to use coal  baskets so you can remove the coals when the temp hits those curing temps.

I usually drape some foil over the paint and dump in a chimney of coals... and then let it burn out completely.
the redhead i patched last summer with caliper paint is holding up surprisingly well.
Title: Re: To paint or not to paint?
Post by: MacEggs on December 18, 2015, 12:59:02 PM
This topic again, eh?? …. I recommend to not do it.

I did it to the bowl only of a red 18" that was abused and not respected.
It was initially a looker, and then a cooker.  I cooked on it a lot, and portions of the bowl turned black.

It's your call, as it is your kettle.
Title: Re: To paint or not to paint?
Post by: Bob BQ on December 18, 2015, 01:12:48 PM
Good call.
Any issues with burning if you go hotter than 500?
500 isn't very hot

Haven't tried it as of yet...  :o

It'll only be for touch-up and to hold the rust. Not concerned about it fading/burning.
Title: Re: To paint or not to paint?
Post by: GregS on December 21, 2015, 08:34:07 AM
Engine enamels will turn black because kettles get hotter than engines apparently.
POR15 did darken when hot, but it did not turn black.  at ambient temps, it's almost a perfect match.

Ford Corp Blue = old dark blue kettles
Ford Engine Red = very close to the old 70's reds.