Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: A slightly bigger project than intended  (Read 11320 times)

Lego187

  • Smokey Joe
  • Posts: 11
A slightly bigger project than intended
« on: September 06, 2020, 03:03:26 PM »
I originally started browsing the posts on here looking for some inspiration on how to best replace a tired looking table on a one touch platinum. This was to be a small job that I was intending on taking a weekend, maybe two. What i failed to take into account was firstly, Corona virus and the subsequent lock down. Secondly, and probably more importantly, my complete inability to keep things simple and not try and make my projects both challenging and resist the urge to try out new ideas and techniques.
What followed was a continuing evolution of ideas that resulted in me deciding to build an outdoor kitchen / table. I told myself that the platinum table size was a little tight and I needed more space, this was the straw that broke the camel's back.
So with an abundance of time, thanks to Corona virus, my inability to resist my own worm hole like idea process and the weakest of excuses, this is what was created.
I hope its well recieved.

Sent from my SM-G960F using Weber Kettle Club mobile app


HoosierKettle

  • WKC Ambassador
  • Posts: 7354
Re: A slightly bigger project than intended
« Reply #1 on: September 06, 2020, 04:20:47 PM »
Exceptional. Only thing I might have done was use a 26”. But it is beautiful. Nice work.


Sent from my iPhone using Weber Kettle Club mobile app

Lego187

  • Smokey Joe
  • Posts: 11
Re: A slightly bigger project than intended
« Reply #2 on: September 06, 2020, 09:53:25 PM »
I had thought about it, but they are hard to get hold of here in the UK and I would have had to make the top a bit to wide to accommodate it. Glad you like it though.

Sent from my SM-G960F using Weber Kettle Club mobile app


blu082003

  • WKC Brave
  • Posts: 400
Re: A slightly bigger project than intended
« Reply #3 on: September 06, 2020, 10:01:09 PM »
🤤 First of all that’s amazing. I also have a couple questions. Is that a concrete countertop? And what ring did you use in the middle? I made a concrete countertop for my kettle table and kettle fireplace but both of them cracked I was thinking about doing another mould but I can’t figure out a better way to keep the heat away. Here are some pre-cracked photos


Sent from my iPhone using Weber Kettle Club

Lego187

  • Smokey Joe
  • Posts: 11
Re: A slightly bigger project than intended
« Reply #4 on: September 07, 2020, 03:28:52 AM »
Thanks blu I'm glad you like it.
Its a shame yours cracked, the fireplace is great.
Yes its cast concrete.
So I used a kettle from a performer that had the brackets on the sides. The brackets sit in two recesses in the concrete and the ring sits in a shallower recess to hide the brackets. So the ring is only aesthetical. There is about 3/4 inch gap all around between the bowl and the concrete and a large gap at the back where the lid bale is. Where as yours look like the bowl is sitting in contact with the concrete all around, is that right?

Sent from my SM-G960F using Weber Kettle Club mobile app


1911Ron

  • WKC Performer
  • Posts: 4457
Re: A slightly bigger project than intended
« Reply #5 on: September 07, 2020, 04:41:49 AM »
Wow that's awesome!
Wanted: 18" Platinum any color will work
This is my Kettle there are many like it but this one is mine......

Lego187

  • Smokey Joe
  • Posts: 11
Re: A slightly bigger project than intended
« Reply #6 on: September 07, 2020, 05:53:38 AM »
Thanks Ron
Wow that's awesome!

Sent from my SM-G960F using Weber Kettle Club mobile app


blu082003

  • WKC Brave
  • Posts: 400
Re: A slightly bigger project than intended
« Reply #7 on: September 07, 2020, 09:02:39 AM »
Ya I tried putting some fiberglass insulation tubing in between the concrete and the kettle but pretty sure it was enough and there were definitely some direct contact spots I just bought some unknown bbq mounting brackets so maybe I can steal your idea and use those to keep it a safe distance away.


Sent from my iPhone using Weber Kettle Club

Lego187

  • Smokey Joe
  • Posts: 11
Re: A slightly bigger project than intended
« Reply #8 on: September 07, 2020, 09:12:12 AM »
Yeah I'd say a decent air gap is the way to go. I think you could get a good inch and still have enough of the bracket sat on the top.

Sent from my SM-G960F using Weber Kettle Club mobile app


JEBIV

  • WKC Ambassador
  • Posts: 10385
Re: A slightly bigger project than intended
« Reply #9 on: September 08, 2020, 06:02:26 AM »
Looks awesome Grate work !!
Seeking a Black Sequoia I know I know, I'd settle for just the tabbed no leg grill

AmirMortal

  • Smokey Joe
  • Posts: 70
Re: A slightly bigger project than intended
« Reply #10 on: September 11, 2020, 01:23:26 AM »
Wow! Nice work!

Lego187

  • Smokey Joe
  • Posts: 11
Re: A slightly bigger project than intended
« Reply #11 on: September 11, 2020, 01:16:41 PM »
Thanks for the positive comments

Sent from my SM-G960F using Weber Kettle Club mobile app


1spacemanspiff

  • WKC Ranger
  • Posts: 1193
Re: A slightly bigger project than intended
« Reply #12 on: September 11, 2020, 05:16:08 PM »
Well done, that's awesome

ISO Yellow Offset SJ, Yellow ranger

MagnoliaTom

  • WKC Brave
  • Posts: 369
Re: A slightly bigger project than intended
« Reply #13 on: September 11, 2020, 05:32:48 PM »
That’s awesome!


Sent from my iPhone using Tapatalk
MBH redhead 22”, Smokey joe AU, Q 100, SSP EE code, new 26”
Looking for MBH 26

AnyThingGrilled

  • WKC Brave
  • Posts: 254
Re: A slightly bigger project than intended
« Reply #14 on: September 11, 2020, 05:50:47 PM »
[emoji1316]


Sent from my iPhone using Weber Kettle Club