Smokey Joe Serial number?

[TurtleFL]

I just rescued a Smokey Joe. Do they have serial numbers? If so where?

It has "DO" on the damper and "Made in U.S.A."

It needs a charcoal grate, is the one listed for 14 inch grills on the Weber site correct?

Thanks.

[JEBIV]

DO = 2005

Sent from my SM-G975U using Weber Kettle Club mobile app

[TurtleFL]

Is there a numerical serial number, I can't find one?

[Ashley Coalburn]

I think they're only on the box, and really just used for registering the warranty.

[Bob BQ]

It needs a charcoal grate, is the one listed for 14 inch grills on the Weber site correct?

Yes.

Is there a numerical serial number, I can't find one?

“DO” is the serial number that you would register your grill with. It was not until more recently that the vent on charcoal grills were given individual serial numbers.

[TurtleFL]

Thanks for all the help.

[TurtleFL]

Any suggestions for replacing the wing nuts, bolt and washers holding the legs on the base and supporting the charcoal grate? I would like to use stainless.

[HoosierKettle]

Go to hardware store and buy stainless. 


Sent from my iPhone using Weber Kettle Club mobile app

[TurtleFL]

I figured that part out! Hoping someone did this already and knew the size, etc.

[JEBIV]

1/4-20 x 3/4 I believe is correct

Sent from my SM-G975U using Weber Kettle Club mobile app

[Bob BQ]

I use 1/4-20 x 1/2”


Sent from my iPhone using Weber Kettle Club

[TurtleFL]

Bob BQ, thanks that's what I needed. I will give it a try.

[TurtleFL]

JEBIV, thanks as well. Will get both and try for best to hold the grate