Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Bottom Cross Bars Necessary?  (Read 2973 times)

Andyinlz

  • Smokey Joe
  • Posts: 63
Bottom Cross Bars Necessary?
« on: October 10, 2019, 07:23:22 AM »
I have recently done a mechanical restoration on a 1994 Redhead Genesis 1000.

Wood also.

I have realized that it does not have either bottom cross bar.....down by the wheels.

Would you bother to fab and replace these?

I will post photos when I figure out how to.

Thanks in advance.
« Last Edit: October 10, 2019, 08:58:34 AM by Andyinlz »

Kneab

  • WKC Performer
  • Posts: 3460
Re: Bottom Cross Bars Necessary?
« Reply #1 on: October 10, 2019, 08:47:58 AM »
Yes they are necessary.
The legs will collapse without the cross bars. You can fabricate some out of square or round tubing. You can run threaded rods the length of the tubes or you can purchase tube nut inserts online or from your local bicycle shop.
Very easily fixed.

Sent from my SM-G960U using Weber Kettle Club mobile app

ISO Brown Go Anywhere

Andyinlz

  • Smokey Joe
  • Posts: 63
Re: Bottom Cross Bars Necessary?
« Reply #2 on: October 10, 2019, 08:53:51 AM »
Photos:

Andyinlz

  • Smokey Joe
  • Posts: 63
Re: Bottom Cross Bars Necessary?
« Reply #3 on: October 10, 2019, 08:55:01 AM »
Last one:

Andyinlz

  • Smokey Joe
  • Posts: 63
Re: Bottom Cross Bars Necessary?
« Reply #4 on: October 10, 2019, 08:57:18 AM »
I will fab and fix.

Thanks.

Walchit

  • WKC Performer
  • Posts: 2141
Re: Bottom Cross Bars Necessary?
« Reply #5 on: October 10, 2019, 01:13:05 PM »
Yeah definitely fix it. Its pretty simple

Mike Huff

  • WKC Brave
  • Posts: 249
Re: Bottom Cross Bars Necessary?
« Reply #6 on: October 11, 2019, 12:17:46 AM »
Nice rehab! I really like the wood slats.

Sent from my SM-G965U using Weber Kettle Club mobile app


Andyinlz

  • Smokey Joe
  • Posts: 63
Re: Bottom Cross Bars Necessary?
« Reply #7 on: October 11, 2019, 02:29:32 AM »
Thanks.

The table wood is cedar from Home Depot simply cut to length and treated with Tung Oil.

The handle was purchased on-line and I also treated it with Tung Oil.

All ideas learned here!