Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Orginal wood handle restoration  (Read 922 times)

racedvl

  • WKC Brave
  • Posts: 449
Orginal wood handle restoration
« on: September 15, 2019, 05:16:21 AM »
Quick question.  I acquired a 74 - 75 with a wood handle that just needs a little love. What is the preferred method after sanding?

Stain and a marine urethane? 
Tung oil?
Other...?



Sent from my SM-G950U using Weber Kettle Club mobile app


MagnoliaTom

  • WKC Brave
  • Posts: 369
Orginal wood handle restoration
« Reply #1 on: September 15, 2019, 06:13:24 AM »
I don’t know what the preferred way is but this is how I did mine...first sand with 220 grit, then 0000 steel wool. Wipe dust clean and applied boiled linseed oil.




Sent from my iPhone using Tapatalk
MBH redhead 22”, Smokey joe AU, Q 100, SSP EE code, new 26”
Looking for MBH 26

kettlebb

  • WKC Ambassador
  • Posts: 5968
Re: Orginal wood handle restoration
« Reply #2 on: September 15, 2019, 06:25:04 AM »
I like Tung Oil. Several coats.




Sent from my iPhone using Tapatalk
Looking for: Red MBH 26"(The Aristocrat), Chestnut-coppertone (The Estate), Glen-blue (The Imperial), and The Plainsman.

racedvl

  • WKC Brave
  • Posts: 449
Re: Orginal wood handle restoration
« Reply #3 on: September 15, 2019, 06:31:51 AM »
How does the linseed or tung oil hold up to the weather... ?

Sent from my SM-G950U using Weber Kettle Club mobile app


MagnoliaTom

  • WKC Brave
  • Posts: 369
Orginal wood handle restoration
« Reply #4 on: September 15, 2019, 06:39:14 AM »
How does the linseed or tung oil hold up to the weather... ?

Sent from my SM-G950U using Weber Kettle Club mobile app
It weathers fine. I have a dining table that’s made of teak on my patio. I use the linseed oil on it whenever it starts to look a little dry or faded. A quick wipe down will always bring it back to life. It’s been on my covered patio for the past 6 years

The handle I made for my genesis is sitting on that teak table.



Sent from my iPhone using Tapatalk
« Last Edit: September 15, 2019, 06:44:37 AM by MagnoliaTom »
MBH redhead 22”, Smokey joe AU, Q 100, SSP EE code, new 26”
Looking for MBH 26

MagnoliaTom

  • WKC Brave
  • Posts: 369
Orginal wood handle restoration
« Reply #5 on: September 15, 2019, 06:51:35 AM »
Just to add...Tung oil is considered by many a better product to use for finishing wood than boiled linseed oil. I just happened to have a big container of it for my table, that’s why I used it for the handles. Once I use it all up, I’ll probably be switching to Tung oil. Also, make sure to use light coats of either type as a thick coat will take a long time to dry and can become tacky and gummy


Sent from my iPhone using Tapatalk
MBH redhead 22”, Smokey joe AU, Q 100, SSP EE code, new 26”
Looking for MBH 26

Cellar2ful

  • Moderator
  • Posts: 3629
Re: Orginal wood handle restoration
« Reply #6 on: September 15, 2019, 06:53:32 AM »

I sand my two rivet handles using only #0000 steel wool.  After sanding I wipe them with a dam cloth and let them dry in the sun for an hour.  I like Tung oil. It really brings out the grains in the wood and is not to dark.  It's easily applied with a small cloth and wiped on.  It holds up real well to sun and rain.  If another application is required, no sanding is needed.  Just reapply the Tung oil using a piece of cloth. 



"Chasing Classic Kettles"

racedvl

  • WKC Brave
  • Posts: 449
Re: Orginal wood handle restoration
« Reply #7 on: September 15, 2019, 07:02:09 AM »
So I have already stained it with a oil based cherry colored stain. About a week ago. No big deal. I could sand it again if I need to. So it seems like no one is doing a marine grade urethane then.... ?

Sent from my SM-G950U using Weber Kettle Club mobile app


Cellar2ful

  • Moderator
  • Posts: 3629
Re: Orginal wood handle restoration
« Reply #8 on: September 15, 2019, 07:37:28 AM »


I use Helmsman Spar Urethane when restoring the newer, single screw wood handles.  The wood on single screw handles are made from a softer wood and do not stand up to the elements like the wood on the twin rivet handles.  The twin rivet handles were made from teak or walnut and have beautiful wood grains, unlike the single screw handles.
"Chasing Classic Kettles"

racedvl

  • WKC Brave
  • Posts: 449
Re: Orginal wood handle restoration
« Reply #9 on: September 15, 2019, 08:00:30 AM »
Yes, I found this handle to be incredibly good looking!

Sent from my SM-G950U using Weber Kettle Club mobile app


Walchit

  • WKC Performer
  • Posts: 2141
Re: Orginal wood handle restoration
« Reply #10 on: September 15, 2019, 07:14:53 PM »
What is that a lime?

DaveG74

  • WKC Ranger
  • Posts: 527
Re: Orginal wood handle restoration
« Reply #11 on: September 16, 2019, 05:28:11 AM »
Yes, I found this handle to be incredibly good looking!

Sent from my SM-G950U using Weber Kettle Club mobile app

Me too, looks great!
I swear, when I score a great deal on a 26" I'll stop buying grills... So often.

racedvl

  • WKC Brave
  • Posts: 449
Re: Orginal wood handle restoration
« Reply #12 on: September 16, 2019, 09:58:53 AM »
What is that a lime?
Mine? Yes.  18" .

Sent from my SM-G950U using Weber Kettle Club mobile app