@jkolantern I used connection T brass to feed from 5lbs tank. Then I bought from Amazon an adjustable pressure regulator to feed both burners. If I used the stock regulator there is not enough pressure if both burners are working, the flame is too weak. The two hoses hoses I used, is the old hose from the SSP. I used also conversion brass fitting to connect all together. The side burner is from a Weber summit gasser. I drill a hole for separate electronic igniter for the bowl burner beside the sparker of the side burner. I have a detailed pics and Videos in FB group. I have a hard time loading a pic and videos here coz the file is too large. I will post pics next time the connection of my hose for my Wedgewood project. I found in Amazon a stainless steel hose that is 2ft long enough for both burners.