Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: How to mount a caster?  (Read 3129 times)

pbe gummi bear

  • WKC Mod
  • Posts: 9059
How to mount a caster?
« on: May 20, 2013, 09:41:36 PM »
Hi folks, need some ideas here. How does one mount this to the end of a square tube? Is there some kind of expanding anchor I could use?

"Have you hugged your Weber today?"
Check out WKC on Facebook:
https://www.facebook.com/pages/Weber-Kettle-Club/521728011229791

Heyjude

  • WKC Performer
  • Posts: 4660
Re: How to mount a caster?
« Reply #1 on: May 20, 2013, 10:00:41 PM »
Are you reinventing the wheel again? Is this for the Performer?  8)
I don't care if you don't like my Avatar, its there for me..

pbe gummi bear

  • WKC Mod
  • Posts: 9059
Re: How to mount a caster?
« Reply #2 on: May 20, 2013, 10:09:41 PM »
Are you reinventing the wheel again? Is this for the Performer?  8)

Yeah, I bought some nice tires for it today.  ;D
"Have you hugged your Weber today?"
Check out WKC on Facebook:
https://www.facebook.com/pages/Weber-Kettle-Club/521728011229791

Heyjude

  • WKC Performer
  • Posts: 4660
Re: How to mount a caster?
« Reply #3 on: May 20, 2013, 10:25:26 PM »
Um, how did you get the height to match?
I don't care if you don't like my Avatar, its there for me..

1buckie

  • WKC Ambassador
  • Posts: 9048
Re: How to mount a caster?
« Reply #4 on: May 21, 2013, 03:37:07 AM »

You gonna chop & channel that SS Perfomer too?

How 'bout headers for the exhaust?

Make sure you use hi-heat primer !!!

There's specialty cabinet hardware places I've found online that may have something for that....I'll look back, as I've got stuff for other projects before.........

Failing that, you could get square wood, near to size, shave it down to fit, insert, drill @ slightly less than the thread size twist it in.....just make sure you screw straight..... 8)
« Last Edit: May 21, 2013, 05:43:29 AM by 1buckie »
"If you want it fancy there is BBQ spray paint at home depot for that. "
    Covered, damper-controlled cooking.....IF YOU PLEASE !!!
           "But the ever versatile kettle reigned supreme"    

1buckie

  • WKC Ambassador
  • Posts: 9048
Re: How to mount a caster?
« Reply #5 on: May 21, 2013, 03:53:42 AM »

I Gargled this up ~~~>

http://www.componenthardware.com/products/subcategoryproductlist/?subcategory=273

"Adapts to either round or square tubing"

"Medium Duty Swivel Expanding Stem "


Not exactly sure how they expand, but I guess they do....... 8)

There's other places also, if this doesn't fly......

« Last Edit: May 21, 2013, 04:10:33 AM by 1buckie »
"If you want it fancy there is BBQ spray paint at home depot for that. "
    Covered, damper-controlled cooking.....IF YOU PLEASE !!!
           "But the ever versatile kettle reigned supreme"    

mikeinctown

  • WKC Brave
  • Posts: 186
Re: How to mount a caster?
« Reply #6 on: May 21, 2013, 06:13:57 AM »
The tubes there now use plastci inserts, so the only way I could think of would be to have someone weld in a small slug with a drilled hole, then weld a nut in place to hold the caster. Personally, I just ordered the $6 replacements from Weber.

pbe gummi bear

  • WKC Mod
  • Posts: 9059
Re: How to mount a caster?
« Reply #7 on: May 21, 2013, 06:25:09 AM »

I Gargled this up ~~~>

http://www.componenthardware.com/products/subcategoryproductlist/?subcategory=273

"Adapts to either round or square tubing"

"Medium Duty Swivel Expanding Stem "


Not exactly sure how they expand, but I guess they do....... 8)

There's other places also, if this doesn't fly......

Thanks, Buckie. Those look like rubber expansion bushings that expand when compressed.
Um, how did you get the height to match?

Ill figure it out. I don't have the casters yet so I don't know how much to chop. Or even if I have to.
"Have you hugged your Weber today?"
Check out WKC on Facebook:
https://www.facebook.com/pages/Weber-Kettle-Club/521728011229791

Heyjude

  • WKC Performer
  • Posts: 4660
Re: How to mount a caster?
« Reply #8 on: May 21, 2013, 06:29:58 AM »
Why not go Stock Weber? Cheaper, Faster, classic.. How much rolling around do you plan to do with it?  8)
I don't care if you don't like my Avatar, its there for me..

pbe gummi bear

  • WKC Mod
  • Posts: 9059
Re: How to mount a caster?
« Reply #9 on: May 21, 2013, 07:11:46 AM »
Why not go Stock Weber? Cheaper, Faster, classic.. How much rolling around do you plan to do with it?  8)

Why not go Stock Weber? Cheaper, Faster, classic.. How much rolling around do you plan to do with it?  8)


Just for fun, really.  :D  I'm obviously not trying to make this easier or cheaper for myself. I have to roll the performer around the building everytime I use it and the stock casters are really dinky. I guess it's just the engineer in me needing to mess with something.
"Have you hugged your Weber today?"
Check out WKC on Facebook:
https://www.facebook.com/pages/Weber-Kettle-Club/521728011229791

Heyjude

  • WKC Performer
  • Posts: 4660
Re: How to mount a caster?
« Reply #10 on: May 21, 2013, 07:28:43 AM »
I figured that was what was happening. I can think of a number of ways to accomplish what you want. Most are more work than I would want to do, but I only have to roll mine a couple feet at a time. The need inspires invention.. Say it Buckie.. "Now there's a tagline". AJ
I don't care if you don't like my Avatar, its there for me..

pbe gummi bear

  • WKC Mod
  • Posts: 9059
Re: How to mount a caster?
« Reply #11 on: May 22, 2013, 09:26:29 AM »
Slight update: I was able to find these star nut plug contraptions that will be perfect for the 1 1/4" tube frame


They use a grip ring connector that plugs and latches instead of a threaded connection. I ordered these and some casters that shipped today. 8)
"Have you hugged your Weber today?"
Check out WKC on Facebook:
https://www.facebook.com/pages/Weber-Kettle-Club/521728011229791