18" One-Touch Platinum new side table

[northwestkettle]

Well I decided to keep this little gem intact it's such a cool little grill. Plastic side table was broken so I made one out of some wormy oak wood my dad had given me awhile back now I just need the lid bale wire that for some crazy reason was missing I guess I should call Weber and see if they still have them or I could try and bend a pice of stainless rod and fab one up I just am not sure how well stainless takes threading? Anyway if anyone wants a broken plastic table for a pattern or whatever let me know you can have it










Sent from my iPhone using Tapatalk

[charred]

Looks good. Nice job! I have to do something similar to mine.

[northwestkettle]

Thanks I had that wood laying around for a couple years and thought this was the perfect opportunity to do something with it and this little 18" has really grown on me since I picked it up

Looks good. Nice job! I have to do something similar to mine.

Sent from my iPhone using Tapatalk

[SmokenJoe]

NWKettle,  very nice upgrade, very nice perf.  Looks in fantastic condition.   Congrat's.
SJ

[northwestkettle]

Thanks SJ
It really was super clean just bad table and someone took the lid bale wire off

NWKettle,  very nice upgrade, very nice perf.  Looks in fantastic condition.   Congrat's.
SJ

Sent from my iPad using Tapatalk

[SmokenJoe]

If you have to craft a replacement, you might want to make certain that it's long enough to stand the kettle lid upright like the 2015+ performers    Borrow a "new" one from a local kettlehead (22's Ok), trace the outline, and then scale down to the size you want.  Once you get there, make the real one out of SS.   Good luck.
SJ

[Bob BQ]

Looks great! One of these days I'm going to find an 18 platinum...

I thought I had seen a post here where someone used a 22 bale on an 18. I'll do some digging and see if I can find it.

22 bale on an 18… here you go, @northwestkettle :

http://weberkettleclub.com/forums/weber-kettles-accessories/22-5-lid-bale-on-18-5'-kettle/msg208283/#msg208283

http://weberkettleclub.com/forums/weber-kettles-accessories/18-5-mastertouch/

http://weberkettleclub.com/forums/weber-kettles-accessories/master-touch-jr/msg202729/#msg202729



Or an 18 bale: http://www.ereplacementparts.com/stainless-steel-lid-hanger-wire-1834-p-1477308.html

[johnny 2 shack]

that 's a fine looking cart ,nice woodwork ,wow I didn't even know they made 18" performers ...oh no ..

[northwestkettle]

Thanks bob for doing some research

Looks great! One of these days I'm going to find an 18 platinum...

I thought I had seen a post here where someone used a 22 bale on an 18. I'll do some digging and see if I can find it.

22 bale on an 18… here you go, @northwestkettle :

http://weberkettleclub.com/forums/weber-kettles-accessories/22-5-lid-bale-on-18-5'-kettle/msg208283/#msg208283

http://weberkettleclub.com/forums/weber-kettles-accessories/18-5-mastertouch/

http://weberkettleclub.com/forums/weber-kettles-accessories/master-touch-jr/msg202729/#msg202729



Or an 18 bale: http://www.ereplacementparts.com/stainless-steel-lid-hanger-wire-1834-p-1477308.html

Sent from my iPhone using Tapatalk

[RottiGuy]

Thats very nice!!

[WNC]

Nice looking table there!
I was also unaware of 18 inch performers, pretty cool

[Harbormaster]

I didn't even know they made 18" performers ...oh no ..

I was also unaware of 18 inch performers, pretty cool

It's not a performer.
Back in the day, Weber made both 18.5" and 22.5" One Touch Platinums. It's a Performer kettle in a cart with a table. That's it. No storage bin, no gas ignition, no thermometer. 

[taicjc]

I have a green 18 inch platinum with a cart.  What is the value?  I was told it is rare.

[bbqking01]

I have a green 18 inch platinum with a cart.  What is the value?  I was told it is rare.

Not sure where you are located...and not sure how rare, but I picked up a green 22” cart a while back for 35.00. Took it home cleaned it up decent the resold it for 235.00. I’m in Phoenix, and there is a lot of people here who grill.


Sent from my iPhone using Weber Kettle Club

[1spacemanspiff]

Nice work, looks really good