Chad can you give me the specifics of what I would need to build that? Like how to ask for that type of board/wood by name and all the little do-hickeys I would need.
I am guessing this could be made with regular home tools? Just regular little home drill and tools like that?
Excuse my ignorance......
Here you go...
4 2'x4'x1/2" plywood sections. You should be able to find these at a local home improvement store; Lowes, Home Depot, etc.
6 6" strap hinges. Zinc plated or galvanized ones won't rust on you, go with zinc or galvanized.
48 1 1/2"x1/4" bolts, with washers and nuts; 1" is not long enough 1 1/4" would be perfect but you'll probably only find 1 1/2"...again, go zinc plated or galvanized.
4 or more 1 1/2" long eye bolts with nuts & washers. Yes, zinc or galvanized again.
Handles would be a nice addition, so would a door chain. Some feet protectors would be nice too, it will raise the wind break slightly so as to keep it off the ground and out of the water.
The hing placement is the tricky part. If you look closely at the pics, you'll see it gave me trouble too