News:

SMF - Just Installed!

Main Menu

Tools needed?

Started by TheDude, July 03, 2017, 10:04:15 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

TheDude

July 03, 2017, 10:04:15 PM
Bought a SSP from @zavod44 that is still in pieces. Finally have some time to work on it, but need some guidance. What tools are needed? I'm not the most handy guy.
Still need a 22" yellow

Kneab

#1
July 04, 2017, 03:00:36 AM
Only 2 tools you need.
You need a 7/16" combination wrench or a ratchet with a 7/16" socket plus a rubber mallet or a hammer to put hub caps on.
ISO Brown Go Anywhere

pbe gummi bear

#2
July 04, 2017, 06:19:17 AM
You'll want a number 1 or 2 Phillips screwdriver for the igniter from the burner tube. It's also useful to have two wrenches to hold both the nut and bolt that keep the kettle on the cart.
"Have you hugged your Weber today?"
Check out WKC on Facebook:
https://www.facebook.com/pages/Weber-Kettle-Club/521728011229791

SteveZ

#3
July 04, 2017, 06:34:08 AM
@TheDude
Hey Dude how about a pic of this pile of Performer your putting together>
SSP Caribique, Black 2nd Generation Performer, 2018 Green Performer, 1970 MBH 26 Black (Fleetwood) with Roti, 1965 Thumb Screw 49er, (2) Black 18 OTG, 2017 Black Master Touch, Black Genesis Silver B.  E code 14 WSM, AH code 18 WSM, AH code 22 WSM,

TheDude

#4
July 04, 2017, 09:15:42 AM
Quote from: SteveZ on July 04, 2017, 06:34:08 AM
@TheDude
Hey Dude how about a pic of this pile of Performer your putting together>

Still need a 22" yellow

SteveZ

#5
July 04, 2017, 10:39:02 AM
BLUE! NICE!!!!!!!!!! Let me know if you have any problems. I've rebuilt a half dozen of these!

Cheers
Steve
SSP Caribique, Black 2nd Generation Performer, 2018 Green Performer, 1970 MBH 26 Black (Fleetwood) with Roti, 1965 Thumb Screw 49er, (2) Black 18 OTG, 2017 Black Master Touch, Black Genesis Silver B.  E code 14 WSM, AH code 18 WSM, AH code 22 WSM,
Print
Go Up Pages1
User actions