Weber Kettle Club Forums

Grill Talk => Weber Grill Forum (Grills, Accessories) => Topic started by: Rub on August 28, 2018, 06:42:41 PM

Title: Any interest in a "Weber" wooden disc insert?
Post by: Rub on August 28, 2018, 06:42:41 PM: Not sure if this is allowed so I apologize in advance if it's not...

I've had a few requests for the 1/4" wood 21" round Weber laser engraved kettle tops like I had made. I use them to turn my looker kettles into a Weber end table. I have one next to my bed as a nightstand. You can set it on the top grill strap tabs but it sits a little low for me. So I measured the height of the handle on a 22' grill, cut 3 wood blocks the same height, and glued them to the back at the 12 and 6 o'clock positions and the center. The grill handles are at the 3 and 9 o'clock spots. So now the top is supported at 12, 3, 6, 9, and the center. It's very stable. And sits near the top, see my pic below. Or come up with your own method. Or use it to hang in your man cave. @Jeff @chiku18 @JEBIV @Plant_City_Mike each have one, maybe they can post their pics as well.

The would be shipped via USPS Priority Mail with insurance. I priced shipping from FL to California and it was $13.90. I would think that's as high as it would be, but I don't know for sure until I have an addy. I *think* up to 3-4 (maybe more?) will ship for the same price as one.

Each disc would be unstained, raw wood. Type of wood will vary but it will typically be very basic grained wood. Staining is simple and you can make it to match your interior. You add your own support if you want it.

Price would be $25 per + the actual cost of shipping. If I get more than 25 ordered I can probably get the cost to $20 per. Payment would be via PayPal, check, or MO.

Post here if you want in. Probably looking at a couple weeks - maybe less - before shipping.

(http://pics.weberkettleclub.com/images/2018/08/28/disc1.md.jpg) (http://pics.weberkettleclub.com/image/f2v)
(http://pics.weberkettleclub.com/images/2018/08/28/disc.md.jpg) (http://pics.weberkettleclub.com/image/f2i)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Troy on August 28, 2018, 06:57:53 PM: Yes allowed, yes I want one

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Mr.CPHo on August 28, 2018, 09:03:24 PM: Fun item to have. Thanks, Rub.

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Dave in KC on August 29, 2018, 12:38:10 AM: I searched high and low for something like that earlier this spring.
Finally ended up having a friend that owns a cabinet shop make one
for me. Makes a great work station when I am using the WSM's

(https://i.imgur.com/KKC8REvh.jpg)

Oh, and ..... $25 is a bargain.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: JEBIV on August 29, 2018, 02:46:09 AM: (https://photos.google.com/search/home/photo/AF1QipNU0nfmz4RcebNJa_XZQxJzo8Xk1y26urMKyHBo)

here ya go
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: JEBIV on August 29, 2018, 03:00:14 AM: I love mine

Sent from my SAMSUNG-SM-G930A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: PotsieWeber on August 29, 2018, 03:14:07 AM: Funny, I've also been thinking about making something similar (with some small differences) for a couple of months.

Quote from: Dave in KC on August 29, 2018, 12:38:10 AM
I searched high and low for something like that earlier this spring.
Finally ended up having a friend that owns a cabinet shop make one
for me. Makes a great work station when I am using the WSM's

(https://i.imgur.com/KKC8REvh.jpg)

Oh, and ..... $25 is a bargain.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Nitro on August 29, 2018, 03:19:04 AM: Definitely want at least one

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: mildrive on August 29, 2018, 03:37:13 AM: Very cool. Love the creative, utilitarian application of looker kettles. I’m in for 2.

Sent from my iPhone
Decatur, Ga
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Ted B on August 29, 2018, 06:28:58 AM: I'll take four. Let me know how to get you the info you need. And what info. Thanks those are awesome.

Sent from my Moto Z (2) using Tapatalk
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: lksdrinker on August 29, 2018, 07:06:53 AM: pretty cool!....a lazy susan version would be nice as well !
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: mcgolden on August 29, 2018, 09:23:05 AM: I’d do 1 or 2

Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: jdorn on August 29, 2018, 09:32:28 AM: I'm in for 1

Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: thinkblue on August 29, 2018, 01:02:08 PM: What about making some for an 18” Weber?

ISO a 26” Red and 1978 Blue MHB kettle
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on August 29, 2018, 05:36:21 PM: Cool, so far it looks like around 10. We're halfway to dropping the price to $20.
If you want one copy and paste the list into your reply and add yourself to the bottom. When this goes 24 hours without an addition I'll place the order. @thinkblue I will ask about a 17" for an 18. I'm sure it would be the same price. If anyone's interested in one for an 18 indicate that on your order below. Tell your friends, and thanks!

Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: firedude5015 on August 29, 2018, 06:05:18 PM: Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1

Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: TD on August 30, 2018, 03:45:36 PM: Quote from: firedude5015 on August 29, 2018, 06:05:18 PM
Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1

Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I have been wondering how to support a side table for the kettle. The lowly 18 makes perfect legs for one.
Thank you Rub! What a good idea.

Sent from my XT1635-02 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: TD on August 30, 2018, 03:48:21 PM: Quote from: firedude5015 on August 29, 2018, 06:05:18 PM
Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1

Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: captjoe06 on August 31, 2018, 12:54:39 AM: Thanks! Love it!
Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1
TD?
captjoe06-1
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Kettle Karl on August 31, 2018, 11:43:37 AM: Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1
TD?
captjoe06-1
Kettle Karl-1
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: JEBIV on August 31, 2018, 11:51:38 AM: Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1
TD?
captjoe06-1
Kettle Karl-1
JEBIV - 1
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: SixZeroFour on August 31, 2018, 02:23:47 PM: Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1
TD?
captjoe06-1
Kettle Karl-1
JEBIV - 1
SixZeroFour - 1
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Brain_STL on August 31, 2018, 03:58:18 PM: Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1
TD?
captjoe06-1
Kettle Karl-1
JEBIV - 1
SixZeroFour - 1
Brain_STL - 1

Sent from my iPad using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: TD15 on August 31, 2018, 05:49:34 PM: Not sure an effective way to list it, but I’m in for 2 if the magnificent beauties... but I’d like 1 for a 22 and 1 for an 18. Teaming up with @normal_J_bird

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: GrillGiant on September 01, 2018, 02:40:10 AM: I would say yes, but my brother ZAVOD44 makes these...they are cool though Rub! [emoji3]

Sent from my iPhone using Tapatalk
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Shoestringshop on September 01, 2018, 03:39:25 AM: Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1
TD?
captjoe06-1
Kettle Karl-1
JEBIV - 1
SixZeroFour - 1
Brain_STL - 1
Shoestringshop-2
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: TD15 on September 01, 2018, 10:31:23 AM: Quote from: Shoestringshop on September 01, 2018, 03:39:25 AM
Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015-1
TD?
captjoe06-1
Kettle Karl-1
JEBIV - 1
SixZeroFour - 1
Brain_STL - 1
Shoestringshop-2
TD15 - 2 (one 22 and one 18 if available)

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on September 04, 2018, 06:38:50 PM: @Troy - 1
@Nitro - 1
@mildrive - 2
@Ted B - 4
@mcgolden - 1 or 2
@jdorn - 1
@firedude5015 -1
@TD ?
@captjoe06 - 1
@Kettle Karl - 1
@JEBIV - 1
@SixZeroFour - 1
@Brain_STL - 1
@Shoestringshop-2
@TD15 - 2 (one 22 and one 18 if available)

Alright I'm ready to place an order. Last call! I'm assuming an 18 will be available as well for the same price.
I need everyone above to email me your name and shipping address. I will work up totals, email them to you, and you can Friends and Family PayPal me the funds.
Email me: rub at swampboys dot com
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Cellar2ful on September 04, 2018, 07:25:29 PM: Dang it. I fought the urge as long as I can. It's the "last call" that got me. (email sent @Rub )

Troy - 1
Nitro - 1
mildrive - 2
Ted B - 4
mcgolden - 1 or 2
jdorn - 1
firedude5015 -1
TD ?
captjoe06 - 1
Kettle Karl - 1
JEBIV - 1
SixZeroFour - 1
Brain_STL - 1
Shoestringshop-2
TD15 - 2 (one 22 and one 18 if available)
Cellar2ful (one 18" if available)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on September 04, 2018, 07:36:30 PM: Lol gotcha covered Jim, you're in.

Please do me a favor and include your order with your shipping addy so I don't have to cross reference and make a mistake. Thanks.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: MacEggs on September 05, 2018, 12:53:09 PM: These look nice ... But, I'm a little partial to what @Uncle Al did ...

http://weberkettleclub.com/forums/weber-kettles-accessories/diy-kettle-work-tops/
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on September 09, 2018, 06:05:55 PM: Sorry for the delay. I plan on getting some payment info out to you guys this week. Thanks for your patience.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on September 10, 2018, 08:14:42 PM: Here's who I have. Please verify this is everything. Thanks!
@Cellar2ful - one 17"
@Nitro - one 21"
@Ted B - four 21"
@captjoe06 - one 21"
@jdorn - one 21"
@Brain_STL - one 21"
@firedude5015 - one 21"
@mildrive - two 21", one 17"
@Kettle Karl - one 21"
@Shoestringshop two - 21"
@Troy - one 21"
@JEBIV - one 21"
@SixZeroFour - one 21"
@Bertl - one 21", one 17"
@Rub - three 21", two 17"
@mcgolden - ?????
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: thinkblue on September 10, 2018, 08:22:51 PM: Count me in for a 17”

ISO a 26” Red and 1978 Blue MHB kettle
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Ted B on September 11, 2018, 02:16:49 AM: Correct for me.

Sent from my Moto Z (2) using Tapatalk
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: mildrive on September 11, 2018, 02:25:57 AM: Correct for me as well. Thanks!

Sent from my iPhone
Decatur, Ga
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Kettle Karl on September 11, 2018, 05:18:28 AM: Correct for me. Thank you!
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: captjoe06 on September 11, 2018, 05:44:03 AM: Rub is it too late to order an additional 17 in addition to the one 21 I already ordered? sorry for the late notice.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Cellar2ful on September 11, 2018, 07:15:15 AM: Yes, correct for me.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: RiverCity BBQ on September 11, 2018, 08:18:57 AM: I'll take 1
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: MrSandman on September 11, 2018, 08:19:59 AM: Those are cool.

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: RiverCity BBQ on September 11, 2018, 08:24:02 AM: Sorry for my late response, just saw the ad and hope I can still get one
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: jdorn on September 11, 2018, 10:38:00 AM: Correct for me

Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Shoestringshop on September 11, 2018, 10:45:54 AM: Correct for me!
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: firedude5015 on September 11, 2018, 10:56:35 AM: Correct for me as well
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Nitro on September 11, 2018, 04:24:18 PM: Correct for me

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: captjoe06 on September 12, 2018, 05:23:03 AM: @Rub I'd like to add another 17 to my order. So 1x 21 and 2 x 17

Sent from my LG-LS997 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on September 12, 2018, 06:04:32 PM: If anyone knows @thinkblue @RiverCity BBQ @TD15 please have them check their messages and send me their info.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: TD15 on September 12, 2018, 06:17:54 PM: Sorry for the delay. Just responded to your message.

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Teddy Todd on September 12, 2018, 06:25:35 PM: Is it still possible to get a 22? Add me to the list?

Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: RiverCity BBQ on September 13, 2018, 06:21:58 AM: Rub, I just PM'd you. Thanks.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Brain_STL on September 13, 2018, 07:34:07 PM: Correct for me

Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on September 17, 2018, 09:13:50 AM: Actual shipping costs are coming up a few dollars more than they were earlier, I’m not sure why.
In an effort to try to avoid me getting hit with PayPal fees, once I send you your total pay me via the friends and family option.
I’m told the discs will be ready “early this week” so hopefully I’ll get them out before the weekend.
Thanks!

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on September 20, 2018, 12:46:51 PM: Update:
The discs were finished this morning and I just picked them up. I’m loading up for a bbq contest today and will be there until Sunday. I should be able to get these to the PO starting Monday and they should get to y’all by Friday and likely sooner.

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: captjoe06 on September 20, 2018, 03:34:39 PM: They look great, thanks @Rub

Sent from my iPad using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: jdorn on September 20, 2018, 04:01:23 PM: Wooooohoooo!! They look awesome!

Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Guntera on September 23, 2018, 05:44:17 PM: I want one!
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Brain_STL on September 23, 2018, 08:23:02 PM: Can’t wait!!! Bring it on, Rub!

Sent from my iPad using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on September 25, 2018, 01:03:41 PM: Sorry it’s going slowly guys. I’ve got over 20 orders and I’ve got to make up every box. I will start sending out PayPal notices tonight once I know the shipping for each package. Thanks for your patience.

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: jkolantern on October 02, 2018, 06:21:39 AM: @Rub any shot at a second edition coming out?
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on October 02, 2018, 08:29:02 PM: Quote from: jkolantern on October 02, 2018, 06:21:39 AM
@Rub any shot at a second edition coming out?
Sure it’s possible if there’s enough interest. I still have to finish up this first batch. I’m waiting on a handful more still.

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Speedster on October 02, 2018, 08:37:07 PM: Send one my way

Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: jkolantern on October 05, 2018, 04:52:11 PM: Def interested
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on October 05, 2018, 06:25:18 PM: I’m at a contest this weekend. Remind me Monday and I’ll see what I can do. I still have a couple to ship from the first order, which will go out Tues AM.

Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Gpd966 on October 25, 2018, 03:46:36 PM: I’m in for a 21incher in the second batch or if you have any leftovers.
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Bertl on November 03, 2018, 01:34:40 AM: Thank you @Rub for the sweet wooden discs you sent to me over the big pond!
I like them very much. I have my birthyearkettle with a disc next to my bed as a nightstand like you....[emoji3] [emoji106]

Sent from my SM-G950F using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Any interest in a "Weber" wooden disc insert?
Post by: Rub on November 04, 2018, 04:50:11 PM: Very cool, glad it made it safely and you like it. Enjoy!