Weber Kettle Club Forums
Grill Talk => Weber Mods, Tables and Customs => Topic started by: captjoe06 on May 10, 2018, 02:31:29 AM
-
I've used these knobs on my Smokey Joe's and they've worked well. I'm not 100% sure if they'll melt in this application but they have metal inserts where it accepts the bolts. I don't have a lot of money into it, worst case scenario I unscrew the knob and take it off if it gets all melt. I'll report back with the results.
Has anyone shot a WGA Lid with an infrared temp gun to get a reading?
Sent from my LG-LS997 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
That sounds like a good idea Joe. I’m really liking my CGA but the lid and handle get really hot really fast. Curious to know how this works out for you.
Sent from my iPhone using Tapatalk
-
I see where you bought the drill bits from, but not "these knobs?"
-
I see where you bought the drill bits from, but not "these knobs?"
Here you go-
https://northeastbbq.com/2016/03/17/webergrills-smokey-joe-lower-vent-mod/
Also the direct link-
https://amzn.to/2Idt5CW
It says in the description they are rated for 400 degrees. I’m not sure if the outside (close to the lid on the CGA) gets that hot. I plan to test today.
Product description
Strength, durability, and heat resistance are some of the benefits of this broad range of phenolic handle. Extremely versatile range of mountings. Female insert machined to suit. Mounting type: female insert. Thread length/depth: 3/8". Mounting diameter and threads per inch: 1/4-20. Plastic material: thermoset; insert material: brass. Measures 7/8" diameter by 2-41/64" height.
Sent from my iPad using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Thanks Cap'n
That's a good look for it.
-
Maybe we can draw up some plans for zav to get mini vent handles
Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
I'm on the fence here. I have a new CGA (never been used) and one of the two lid vents is tight. the other is looser and spins at the slightest touch.
I realize some grease build-up will seal it, but i wonder if installing a handle won't make it looser over time, due to either weight or leverage?
#firstworldproblems
-
I'm on the fence here. I have a new CGA (never been used) and one of the two lid vents is tight. the other is looser and spins at the slightest touch.
I realize some grease build-up will seal it, but i wonder if installing a handle won't make it looser over time, due to either weight or leverage?
#firstworldproblems
The weight is not an issue. I just did a test with an. Infrared temp gun. I'll post the results. It was for a reverse sear ribeye with both bottom vents wide open and the top vent over the coals closed and the opposite top vent wide open
Sent from my LG-LS997 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
-
https://northeastbbq.com/2018/05/10/weber-go-anywhere-lid-temp-test/
[size=1.625rem]Weber Charcoal Go-Anywhere Lid Temp Test (https://northeastbbq.com/2018/05/10/weber-go-anywhere-lid-temp-test/) Results