Weber Kettle Club Forums
Grill Talk => Weber Grill Forum (Grills, Accessories) => Topic started by: swamprb on February 24, 2018, 01:58:44 PM
-
Im sure I could figure something out, but if anyone is in the mood, Im looking to modify a 22 Slide Aside to fit on an 18 Kettle.
Length of wire bale
Length of stainless steel support
Thanks in advance!
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
The arched area is 23.25" counting to the outer edge of the radius going to the lid roller. Lid roller is 2.5" from the kettle bowl to outer arch. Support bar is 7.5 inches from the lower bend to the center of the hole the wire goes through. hth.
-
I'm pretty sure the Slide Aside is designed to fit and be used on both the 18" and 22" kettles. Here are photos of it on both an 18" and 22". I got it specifically to use with my 18" cooker. It works great.
http://weberkettleclub.com/forums/product-reviews/weber-slide-aside-32786/msg325817/#msg325817
-
I'm pretty sure the Slide Aside is designed to fit and be used on both the 18" and 22" kettles. Here are photos of it on both an 18" and 22". I got it specifically to use with my 18" cooker. It works great.
http://weberkettleclub.com/forums/product-reviews/weber-slide-aside-32786/msg325817/#msg325817
This. 👆🏻
-
I presumed we were talking about the "tuck-away" lid holder on the performer and 18" OTP
-
Im talking about the Master-Touch style lid bail
https://www.ereplacementparts.com/lid-bale-brackets-with-hardware-p-1477084.html
I know Ive seen people modify the 22 to fit an 18.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
The arched area is 23.25" counting to the outer edge of the radius going to the lid roller. Lid roller is 2.5" from the kettle bowl to outer arch. Support bar is 7.5 inches from the lower bend to the center of the hole the wire goes through. hth.
Thanks Lawrence
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Threw me off when you said Slide Aside.
-
The arched area is 23.25" counting to the outer edge of the radius going to the lid roller. Lid roller is 2.5" from the kettle bowl to outer arch. Support bar is 7.5 inches from the lower bend to the center of the hole the wire goes through. hth.
Thanks Lawrence
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
np. @tag me or fb message me for faster response. Oh, and that 23.25" measurement is along the curve/circumference of the bail.
-
Ah the bale! I too was thrown off by the slide aside. Wow, I would love to see a bale modified to fit an 18! Good luck! Post pics!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
-
Its in mm
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
[attachment deleted by admin]
-
I took some pictures of the lid bale from my former 18.5 OTP and uploaded them to a google album. I also have a 22.5 lid bale if you want to see side-by-side pics. Would have posted sooner, but the "slide aside" terminology threw me . . .
https://photos.app.goo.gl/SjmY3cNLZAeMAf722 (https://photos.app.goo.gl/SjmY3cNLZAeMAf722)
(https://lh3.googleusercontent.com/dqPXUOulI4thcRKa53mzP3IOQrTRTY1ET1boz9ZKtNNnr5LQF-MNaSCm_ytf1hbvdT5CnVSwRUcRYMNTcQDfBNqGW3vcKuouyoz_DzpCxpwhkiXGPgArIfLRDtaFHvBHKDaF1QRWnA=w2400)