I just purchased a Weber OTG in like new condition but it doesn't have the thermometer in the lid. I want to install a Weber 70180 thermometer, but I'm having trouble locating one. Any suggestions? FYI, the model replacing the 70180 is more expensive and the bezel has to be purchased separately.
I wonder if that is the same one that goes in the Weber Q
Here are a few pics of what I have.
(https://farm3.staticflickr.com/2550/13144424655_b6c58e7269_z.jpg)
(https://farm8.staticflickr.com/7311/13144707594_cf253051d5_z.jpg)
(https://farm8.staticflickr.com/7460/13144408595_2574e2f89b_z.jpg)
I am going to be using mine for a Mini WSM build.
Correction I thought you were saying you just needed the therm and not the bezel.
Try ereplacementparts.com. They have a great selection of weber parts and the prices are fair.
Weber used to sell the therm and bezel for around $12 but since last October (parts price hike), you cant find that deal anymore. I think you have to go purchase them separately.
HERE:
http://www.ereplacementparts.com/thermometer-dualpurpose-p-1476256.html
That's not the same, buckie. That one goes into a MT or older Performer lid.
The OP wants this one (only with the bezel)
(https://farm8.staticflickr.com/7460/13144408595_2574e2f89b_z.jpg)
Quote from: LightningBoldtz on March 14, 2014, 02:46:41 AM
I wonder if that is the same one that goes in the Weber Q
Here are a few pics of what I have.
(https://farm3.staticflickr.com/2550/13144424655_b6c58e7269_z.jpg)
(https://farm8.staticflickr.com/7311/13144707594_cf253051d5_z.jpg)
(https://farm8.staticflickr.com/7460/13144408595_2574e2f89b_z.jpg)
I am going to be using mine for a Mini WSM build.
That's a nice-looking gauge and at 1-3/4" diameter it should fit the WSM bezel.
Here's one that is specific to "Low and Slow" cooking but it is 2" diameter.
I have a Tel Tru on a smoker and it's pretty accurate for an analog gauge.
BQ225 w/2.5" stem
(http://i59.tinypic.com/5ottmh.jpg)
The closest I could find to the OP's part# was a therm/bezel for a 22.5" WSM
Looks like the fluted bezel.
The new WSMs over at the hardware have a shorter bezel and no flutes.
They look very sanitary.
http://www.ereplacementparts.com/weber-731001-2009-smokey-mountain-cooker-225-parts-c-193079_193086_193163.html
"That's not the same, buckie. That one goes into a MT or older Performer lid."
Gotcha......those ones which are kinda slightly oval shaped & look pretty sharp.......
Someone over on the bullet forum was looking for the same therm/bezel.
Sounds like Weber isn't interested in selling many of these.
One of the posters recommended the 1.75" therm/bezel.
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Brandon Risko:
Wow, so I guess if I call them I need to tell them I have an (imaginary) Performer and the thermometer/bezel were damaged when a wind storm blew the top around on my patio? I can't just call and order by the part # for my OTG? </div></BLOCKQUOTE>
Nope, you gotta lie (against my principles). But "webercloseouts" on eBay sells a Therm for the Summit - the smaller one - and the 18" WSM temperature gauge bezel all the time on eBay. It'll cost you more than what people are paying Weber ($20-$25 w/shipping), but it gives a guranteed hassle-free option to obtaining the parts.
If you go this route, please get the 18" WSM bezel, and Weber Summit thermometer that fits that bezel. I purchased the 22" WSM and larger Summit therm for a 22 inch kettle and it looks like a giant wart sitting on the kettle. http://tvwbb.infopop.cc/groupee_common/emoticons/icon_eek.gif Waaaaay too big.
Don't bother with the WSM thermometer either - it only goes up to 400 degrees or so, and you'll blast through that on your next cook.
Shaun R
03-23-2012, 07:03 AM
I have been wondering if Tel-Tru makes a thermometer to fit the bezels.
rya
This may be it (two separate part numbers).
Ref #14 under "Other Parts"
http://www.appliancefactoryparts.com/gasgrillparts/brands/weber/781001-one-touch-gold.html