Has anyone added this ash catcher on older models ?
I just acquired a M# kettle
https://www.weber.com/CA/en/parts--et--support/replacement-parts/charcoal-parts/65162.html
Part Number: #65162
High-Capacity Ash Catcher
Compatible with 22" Orig Kettle Prem, most Master-Touch, Limited Edition Kettles
Can you provide a photo of the bottom bowl and the leg sockets? The newer ash catcher lip/tabs would have to line up
with three slots, which depends on how the leg sockets are positioned.
https://weberkettleclub.com/blog/2014/03/03/converting-a-weber-ots-to-otg/
Thanks for the link, I ordered the ash catcher, slots on kettle wont line up, looks like I either have to use hose clamps or screw it to the sockets.
Quote from: RRRanger99 on January 04, 2025, 10:14:53 AMCan you provide a photo of the bottom bowl and the leg sockets? The newer ash catcher lip/tabs would have to line up
with three slots, which depends on how the leg sockets are positioned.
https://weberkettleclub.com/blog/2014/03/03/converting-a-weber-ots-to-otg/
@big-gun You can also use bailing wire to attach it. I used copper wire to attach the ash catcher ring in this kettle pictured below. I prefer this method as it is not visible like the hose clamps are and also doesn't require drilling as required using screws.
Quote from: Cellar2ful on March 28, 2023, 08:39:58 AMQuote from: Samuel on March 27, 2023, 11:07:53 PMI saw someone post that you could mount the old style SSP ash catcher ring with bailing wire. Does anyone have a link to this thread or any pics of what this looks like?
Here is a link for installing the older style ash ring without using the crossbar:
http://weberkettleclub.com/blog/2014/03/03/converting-a-weber-ots-to-otg/
I used copper wire to install an ash ring on a kettle that the legs would not accommodate the ash ring tabs.
(http://pics.weberkettleclub.com/images/DSC09124.jpg)
You can use copper wire or bailing wire instead of the heavy gauge wire that is depicted in the WKC blog link I posted above.