I was upgrading the screws on my performer to stainless ones and when I was installing the last screw the nut plate came lose and started to spin.
So I am looking at a fix ,but it would require bring the the grill to a shop to get it tack welded.
Can you think of another option?
Thanks.
Sent from my SM-G965U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
You may be able to center punch around the edges of it to keep from spinning. Or apply a few drops of Loctite between the nut and frame.. The green or red kind would probably work well.
Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Longer bolt with a nut on the bottom it should be hidden behind the front plate so you can't see it.
Sent from my SM-N986U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Good idea,but I have to drill the spining nut plate
Quote from: Red_5_Wrangler on December 23, 2020, 05:54:28 AM
Longer bolt with a nut on the bottom it should be hidden behind the front plate so you can't see it.
Sent from my SM-N986U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G965U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Looking at these options I drilled out the rivnut and fitted a replacement ,after talking to some friends one had access to a rivnut tool and was able to use it. Replaced and table reinstalled perfect.
Thanks for the ideas.
Quote from: Easy on December 23, 2020, 08:09:03 AM
Good idea,but I have to drill the spining nut plate Quote from: Red_5_Wrangler on December 23, 2020, 05:54:28 AM
Longer bolt with a nut on the bottom it should be hidden behind the front plate so you can't see it.
Sent from my SM-N986U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G965U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G965U1 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)