I've had these two "EE" 1999 Master Touch's for a few years in the pile, they both had leg sockets with broken welds which I riveted in place, and the ash sweeps were toast. I happen to like the Gen1 MT ash pan and thought I'd detail my mod for reusing it when replacing new One Touch sweeps.
I trim thin strips of steel or aluminum and pop rivet them to the ring and bend them to fit under the leg sockets.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
The cross bar is obsolete
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Great job on the ash catcher mounting tabs!
What are the bolts and washers for at the tips of the sweeps
Quote from: Walchit on November 10, 2019, 09:49:59 AM
What are the bolts and washers for at the tips of the sweeps
Those are magnets to hold them in place when turned over to insert handle and lock washer
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I thought they looked like magnets, but I couldn't figure it out. That's a nice technique for the ash sweeps!
Quote from: swamprb on November 12, 2019, 12:53:03 AM
Quote from: Walchit on November 10, 2019, 09:49:59 AM
What are the bolts and washers for at the tips of the sweeps
Those are magnets to hold them in place when turned over to insert handle and lock washer
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
That's brilliant! Makes me feel like I just found out the wheel existed tho.....
I typically stick one finger through the vent to push down on the center of the one touch while holding the washer with the rest of the fingers. Works quite well for people that dont have 3 arms/hands.
Quote from: swamprb on November 12, 2019, 12:53:03 AM
Quote from: Walchit on November 10, 2019, 09:49:59 AM
What are the bolts and washers for at the tips of the sweeps
Those are magnets to hold them in place when turned over to insert handle and lock washer
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my MI MIX 3 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)