Text only | Text with Images

Weber Kettle Club Forums

General => Australia => Topic started by: bear on July 21, 2019, 03:14:37 PM

Title: ISO Gen 1 Ashbucket and Ring
Post by: bear on July 21, 2019, 03:14:37 PM
And hex drive sweeps if possible. 
Send me a PM (https://uploads.tapatalk-cdn.com/20190721/49f93acd838d460fd8d69118a89135cf.jpg)
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: bear on August 17, 2019, 01:07:54 AM
Bump
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: MagnoliaTom on August 17, 2019, 04:28:37 AM
I just got a gen 1 SSP and need one as well. Can you school a newbie on the difference between the original and one I was going to get online?
Part 65143 is what I was looking to get


Sent from my iPhone using Tapatalk
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: Walchit on August 17, 2019, 09:48:12 AM
The older kettles leg sockets aren't oriented properly for the new ring to clip onto. People use different methods to get the new ones to work.
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: Bob BQ on August 17, 2019, 11:43:22 AM
I have an extra Gen 1 ring and bar, but no bucket. Might have an extra set of hex nut sweeps... I'll check.


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: MagnoliaTom on August 17, 2019, 12:51:12 PM
Quote from: Walchit on August 17, 2019, 09:48:12 AM
The older kettles leg sockets aren't oriented properly for the new ring to clip onto. People use different methods to get the new ones to work.
Thanks for the info!


Sent from my iPhone using Tapatalk
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: MagnoliaTom on August 18, 2019, 09:29:04 AM
Can the new sweeps work with the old style pan? Wondering if the mounting tabs on the sweep are long enough to accommodate the bracket that holds the ash pan in place.


Sent from my iPhone using Tapatalk
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: MagnoliaTom on August 19, 2019, 04:46:20 AM
Quote from: MagnoliaTom on August 18, 2019, 09:29:04 AM
Can the new sweeps work with the old style pan? Wondering if the mounting tabs on the sweep are long enough to accommodate the bracket that holds the ash pan in place.


Sent from my iPhone using Tapatalk

After searching I see you need to do a little modification to make it work


Sent from my iPhone using Tapatalk
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: bear on August 31, 2019, 05:10:33 PM
1 found, 1 to go
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: Jules V. on August 31, 2019, 06:46:00 PM
I have a few extra rings but no basket, crossbars or sweeps.
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: Golly on January 01, 2021, 07:58:03 PM
I have this @bear


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: PotsieWeber on April 17, 2021, 06:20:09 PM
@bear
Someone who hasn't been around for quite a long time noticed your message box is full.  Sorry, I didn't get back to you sooner and understand if you've moved on.  Got super busy with the little one "remote learning" and a new client that is regularly sending me stuff with very tight deadlines, so it's been a little nuts for me.

Quote from: bear on August 31, 2019, 05:10:33 PM
1 found, 1 to go
Title: Re: ISO Gen 1 Ashbucket and Ring
Post by: bear on April 17, 2021, 06:55:48 PM
Inbox clear
Text only | Text with Images