Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: hismaimai7777 on November 26, 2018, 09:55:44 PM

Title: Rotisserie Mod?
Post by: hismaimai7777 on November 26, 2018, 09:55:44 PM
Does anyone have a cheap rotisserie mod idea for a 22" Weber? I would love to buy the genuine Weber kit but it's $250 here in Australia and is totally overpriced for what it is- a ring and a rotisserie, although I've read the rotisserie is made in Germany.

Keen to hear if anyone else felt the same and what their solution was!
Title: Re: Rotisserie Mod?
Post by: ClubChapin on November 26, 2018, 10:49:29 PM
Get a cheap kettle and do this:
http://weberkettleclub.com/forums/weber-kettles-accessories/kettle-id-help/msg120998/#msg120998

http://weberkettleclub.com/forums/weber-kettles-accessories/make-a-ham-on-your-$30-00-weber-rotisserie/msg93115/#msg93115
Title: Re: Rotisserie Mod?
Post by: Darko on November 27, 2018, 08:24:32 AM
There are non Weber options.  https://www.amazon.com/onlyfire-2-Inch-Charcoal-Rotisserie-Masterbuilt/dp/B00XMTB1KY
Title: Re: Rotisserie Mod?
Post by: einrej on November 27, 2018, 02:02:41 PM
Make your own Weber rotisserie for $30.00
You will need
1 Old Weber
1 Universal rotisserie kit, home center about $30.00
1 Thermometer for the lid about $6 at the home center. You will not know your cook temperature without this.

1. Drill 2 5/16 holes, one inch below lower kettle rim, in the center of the kettle parallel to the wheels.
2. Run spit rod through holes, mount motor bracket on left side. Bracket will have to be shimmed out do to curvature of kettle.
    Do not attach bracket without shims for this will add heat transfer to the bracket and motor.
3. I sawed off the non-point end of the skewer rod so only a few inches protrude when in use.

   The rod goes into the motor on the left side. The bushing keeps the rod from walking out the right side.
   Questions?
   Thanks,
   E
einrej

Quote from: einrej on July 21, 2015, 05:35:23 PM
(http://i1330.photobucket.com/albums/w565/einrej/01-01-14%20Turkey/DSCN1473sml_zpsbbd6c938.jpg) (http://s1330.photobucket.com/user/einrej/media/01-01-14%20Turkey/DSCN1473sml_zpsbbd6c938.jpg.html)

Take a look at....    http://weberkettleclub.com/forums/weber-kettles-accessories/make-a-ham-on-your-$30-00-weber-rotisserie/msg93115/#msg93115



Make your own Weber rotisserie for $30.00
You will need
1 Old Weber
1 Universal rotisserie kit, home center about $30.00
1 Thermometer for the lid about $6 at the home center. You will not know your cook temperature without this.

1. Drill 2 5/16 holes, one inch below lower kettle rim, in the center of the kettle parallel to the wheels.
2. Run spit rod through holes, mount motor bracket on left side. Bracket will have to be shimmed out do to curvature of kettle.
    Do not attach bracket without shims for this will add heat transfer to the bracket and motor.
3. I sawed off the non-point end of the skewer rod so only a few inches protrude when in use.

   The rod goes into the motor on the left side. The bushing keeps the rod from walking out the right side.
   Questions?
   Thanks,
   E

(http://i1330.photobucket.com/albums/w565/einrej/DSCN4277sml_zps5c266478.jpg) (http://s1330.photobucket.com/user/einrej/media/DSCN4277sml_zps5c266478.jpg.html)

(http://i1330.photobucket.com/albums/w565/einrej/DSCN2283sml_zps99de9440.jpg) (http://s1330.photobucket.com/user/einrej/media/DSCN2283sml_zps99de9440.jpg.html)
Title: Re: Rotisserie Mod?
Post by: greenweb on November 27, 2018, 05:04:00 PM
einrej Rotisserie mod is the most cost effective.

If you already have a KettlePizza.  You can mod it to a duel purpose Rotisserie/Pizza oven. I have a thread somewhere on how I made this.
(http://pics.weberkettleclub.com/images/2018/01/22/rsz_img_5228.jpg)

Or, if you rather buy one. Onlyfire roti. All SS ring and much cheaper than Weber version. SS ring and better seal at the bot. of the ring is why I got it. Pretty good reviews too. I may mod this too. Roti/Smoker ring.
(http://pics.weberkettleclub.com/images/2018/10/06/IMG_5582.jpg)





Title: Re: Rotisserie Mod?
Post by: jimz on December 01, 2018, 09:36:25 AM
See attached pic. The rotisserie kit cost 80 on amazon 50 lb capacity. It's just a piece of 12 ga hot rolled with holes to accept the rotisserie. High temp paint from amazon. Works great:


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Rotisserie Mod?
Post by: Jules V. on December 01, 2018, 11:05:05 AM
A bit over budget but rotisserie are great to have. (https://uploads.tapatalk-cdn.com/20181201/776ea7f875ffddcf085b5b57f7b272f6.jpg)
Title: Re: Rotisserie Mod?
Post by: Jules V. on December 01, 2018, 11:08:14 AM
Quote from: greenweb on November 27, 2018, 05:04:00 PM

Or, if you rather buy one. Onlyfire roti. All SS ring and much cheaper than Weber version. SS ring and better seal at the bot. of the ring is why I got it. Pretty good reviews too. I may mod this too. Roti/Smoker ring.


I picked up an Onlyfire also but the ring and motor mount were too flimsy for my liking.