Weber Kettle Club Forums

Grill Talk => Weber Mods, Tables and Customs => Topic started by: Jules V. on June 16, 2018, 01:19:23 PM

Title: Charcoal Holders.
Post by: Jules V. on June 16, 2018, 01:19:23 PM
Made some charcoal baskets/ rings out of 10 gauge ventilated 304 stainless.  No drilling necessary as the holes line up perfectly to accept a 1/4" bolt. 
(https://uploads.tapatalk-cdn.com/20180616/4484e3b4766324cfe43d15f85edb7b0e.jpg)
9 1/2", 11 1/2" and d 19".
Title: Re: Charcoal Holders.
Post by: Schaefd2 on June 16, 2018, 02:19:54 PM
Sweet! I coulda used one of those today


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Charcoal Holders.
Post by: addicted-to-smoke on June 16, 2018, 03:52:16 PM
Nice!
Title: Re: Charcoal Holders.
Post by: northernQ on June 17, 2018, 05:30:57 AM
Where did you source the ventilated steel?


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Charcoal Holders.
Post by: Jules V. on June 17, 2018, 06:17:32 AM
Quote from: northernQ on June 17, 2018, 05:30:57 AM
Where did you source the ventilated steel?


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Most  local stores that specialize  in metals should have some remnants in stock.  Typically sold by square feet and they'll cut any dimensions that you meed.
Title: Re: Charcoal Holders.
Post by: CarrieAnn on June 17, 2018, 06:40:28 AM
I need one of those snake set-up ones!!  That's pretty slick. What did you put in the middle?


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Charcoal Holders.
Post by: Jules V. on June 17, 2018, 06:49:30 AM
Water pan was once a stock pot.
Title: Re: Charcoal Holders.
Post by: YardBurner on June 17, 2018, 01:48:19 PM
How did you get the perfect circle?
Title: Charcoal Holders.
Post by: Jules V. on June 17, 2018, 02:15:48 PM
Just bolt down 2 pipes spaced about twice the thickness of the sheet and bend it until you get to the desired diameter.  Simple and works all the time.
Title: Re: Charcoal Holders.
Post by: JEBIV on June 18, 2018, 03:59:11 AM
Very nice, and useful too
Title: Charcoal Holders.
Post by: Jules V. on June 18, 2018, 08:10:09 PM
Quote from: JEBIV on June 18, 2018, 03:59:11 AM
Very nice, and useful too
Thanks. They are real nice to look at in person especially at night with the charcoal raging hot. Well worth the $22 per sq ft price tag.  Should last a very long time.
Title: Re: Charcoal Holders.
Post by: YardBurner on June 19, 2018, 07:25:25 AM
Call me stupid, but I'd love to see some photos of your bending set up.
Title: Charcoal Holders.
Post by: Jules V. on June 19, 2018, 08:48:55 AM
There you go.  A much larger diameter pipes would work better but it's not necessary since the width of the material being bent is very small. Just insert  the sheet between the pipes and push down  to your desired curvature. Also if you have a tree trunk that has a nice round trunk with the right diameter, just screw one end of the sheet and wrap it around. Not much effort to bend the sheetmetal being less than 5" wide.  The holes in it also makes it much easier to bend.
(https://uploads.tapatalk-cdn.com/20180619/f5e72d61a9f4de5914f60dbc6c0f95e6.heic)
For sharp right angle, i use this old bed frame.
(https://uploads.tapatalk-cdn.com/20180619/8f7d2633a4db99fc948220edfb36ec53.heic)
Title: Re: Charcoal Holders.
Post by: lksdrinker on June 19, 2018, 01:24:19 PM
Quote from: Jules V. on June 19, 2018, 08:48:55 AM
There you go.  A much larger diameter pipes would work better but it's not necessary since the width of the material being bent is very small. Just insert  the sheet between the pipes and push down  to your desired curvature. Also if you have a tree trunk that has a nice round trunk with the right diameter, just screw one end of the sheet and wrap it around. Not much effort to bend the sheetmetal being less than 5" wide.  The holes in it also makes it much easier to bend.
(https://uploads.tapatalk-cdn.com/20180619/f5e72d61a9f4de5914f60dbc6c0f95e6.heic)
For sharp right angle, i use this old bed frame.
(https://uploads.tapatalk-cdn.com/20180619/8f7d2633a4db99fc948220edfb36ec53.heic)

Thats awesome right there!....I was just looking at a bending brake at the store and couldn't justify buying it for the amount of times I'd need it.  Problem solved!
Title: Re: Charcoal Holders.
Post by: Jules V. on June 19, 2018, 01:58:33 PM
Quote from: lksdrinker on June 19, 2018, 01:24:19 PM

I was just looking at a bending brake at the store and couldn't justify buying it for the amount of times I'd need it.  Problem solved!
Same here. I've been meaning to get a sheetmetal brake for years but  never got around to it  because of the price.  One of these days when i can find some metal bars for free or cheap, I'll probably just make a manual brake. Should be  a pretty simple  project.
Title: Charcoal Holders.
Post by: Jules V. on June 21, 2018, 02:14:27 PM
More options.
(https://uploads.tapatalk-cdn.com/20180621/694857e252de56ae3f60b34d756451cc.heic)
I'll be using this setup for direct over coals rotisserie or skewers. Should minimize the handle of a bamboo skewer from burning. Dividers are removable.
(https://uploads.tapatalk-cdn.com/20180621/e8f611632629b02b8b38c72d255765fb.heic)
A more conventional charcoal arrangement.
Title: Re: Charcoal Holders.
Post by: addicted-to-smoke on June 21, 2018, 05:45:12 PM
OK now you have my attention. For some reason, those last 2 setups just look especially crazy functional --- and different.
Title: Re: Charcoal Holders.
Post by: Jules V. on June 21, 2018, 06:22:06 PM
Quote from: addicted-to-smoke on June 21, 2018, 05:45:12 PM
OK now you have my attention. For some reason, those last 2 setups just look especially crazy functional --- and different.
You need one!  Quick and very simple to make.
On a different note, I'm finally done working on the grills and it's accessories. Even dialed in the smoker portion of it. Can finally spend more time cooking and enjoying the great summer weather. Well maybe not totally done, a couple of fully custom performers are looming in the horizon. Stay tuned.
Title: Re: Charcoal Holders.
Post by: addicted-to-smoke on June 22, 2018, 06:06:06 AM
I just realized those center sections are held in by brackets on one side but by the walls on the other. Nicely done.

It's still June but I'm already in a race against time to finish my earlier kettle project, along with a few 40-50-60 yr old tractors, trailers and whatever other crap falls apart around here.
Title: Re: Charcoal Holders.
Post by: Jules V. on June 22, 2018, 07:30:29 AM
Yeah those brackets  should be enough to hold the inserts in place. Hopefully they wouldn't  warp too much under high heat as I'm trying to avoid adding  some type of a reinforcement  plate.  I can always bolt 2 pieces together but decided to save the extra materials for other future projects. The material is not cheap either at  $22 per sq ft.
Title: Re: Charcoal Holders.
Post by: Jules V. on June 23, 2018, 11:21:14 AM
Just had to try it out. Salt & pepper tri tip steak.  Having the spit directly over the coals adds more flavor and doesn't require a drip pan.   Bowl remains clean and no  oily drip pan to deal with.
(https://uploads.tapatalk-cdn.com/20180623/01a932b7b0f1c3c157979fde64353204.heic)
(https://uploads.tapatalk-cdn.com/20180623/e86030b6e9b632921e83139a5c867497.heic)