Hey everyone,
Friday 4/13 I am making my first attempt at a pork shoulder. I have a roughly 8 pound shoulder and I was planning on trying to follow this guy:
https://www.youtube.com/watch?v=ymWivHIsStk
He's got the top vent cracked about 1/8" and the bottom vent cracked about the same. I have a 3 wheeler.. I was thinking I crack the bottom vents 1/8"?
I will be using Royal Oak lump.. well, because that was all I could find locally on short notice.
I'm thinking the cook will go 10 hours if kept around 250.. and pull it off the grill when it hits 195 on the inside?
Lastly.. use my workhorse faded black? Or shall I break out the Cado?
That's a good video. I like his detail. Gonna share it with a buddy of mine who has a "Bigger, Better Basket." In other words, just like the guy in the video, he would not be doing a snake.
You'll add charcoal throughout, because lump burns hotter/quicker. Have water in a pan; you'll need it to stabilize the temp with that fuel. I'd use the black ... I'm not a fan of banking coals, ever, on a colored grill!
My understanding of doing this on a 3-wheeler is to completely close two vents and just work the other, under the fuel. You won't even have to open it up fully.
Cook report:
I didn't realize the lump was a bit different from briquettes... I'm not used to lump so I ran out and picked up some Kingsford (I want to do something simpler to learn working with lump.. so I'll experiment and learn with lump another time).
Anyways, I got the pork shoulder on around 9am. My temps started out around 275 and I dialed it down to around 250 for a while. After the first mopping I'm at about 230 so I opened the vents slightly more.
I went with the faded black.. I agree with banking the coals on a colored kettle.. forgot about that so the Cado is resting. I didn't know that about the 3-wheeler vents. Right now I have all three slightly cracked. Next time around I'll experiment with two closed and one open but I'll leave it as-is for now.
I did notice meat temps are coming up. I'm wondering if it's just improper placement of the meat temp probe? I don't think I'm going to go the estimated 10 hours. I saw a bunch of people in videos take the fat cap off... I did.. maybe I wasn't supposed to? I'm 3 hours in and the meat is at 137 degrees... pit temp 231. I'm gonna turn the shoulder 180 degrees at the next mopping in an hour.. maybe I'll look for a better spot for the probe.. perhaps on the side away from the coals.
Quote from: james1787 on April 13, 2018, 07:54:01 AM
Cook report:
I didn't realize the lump was a bit different from briquettes... I'm not used to lump so I ran out and picked up some Kingsford (I want to do something simpler to learn working with lump.. so I'll experiment and learn with lump another time).
Anyways, I got the pork shoulder on around 9am. My temps started out around 275 and I dialed it down to around 250 for a while. After the first mopping I'm at about 230 so I opened the vents slightly more.
I went with the faded black.. I agree with banking the coals on a colored kettle.. forgot about that so the Cado is resting. I didn't know that about the 3-wheeler vents. Right now I have all three slightly cracked. Next time around I'll experiment with two closed and one open but I'll leave it as-is for now.
I did notice meat temps are coming up. I'm wondering if it's just improper placement of the meat temp probe? I don't think I'm going to go the estimated 10 hours. I saw a bunch of people in videos take the fat cap off... I did.. maybe I wasn't supposed to? I'm 3 hours in and the meat is at 137 degrees... pit temp 231. I'm gonna turn the shoulder 180 degrees at the next mopping in an hour.. maybe I'll look for a better spot for the probe.. perhaps on the side away from the coals.
231 is fine for the pit. The temp of the butt will eventually stall and be stuck for awhile. That will make the time estimate even out a little bit....but if it cooks faster, no big deal... that is a forgiving cut of meat. All will be well. Don't worry; enjoy the experience and the aromatics.
Sent from my LG-TP260 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Ahhh good to know.. I didn't realize meat hits a stalling temp for a while. You learn something new every day! Next time you're in NJ.. let me know. We'll grab a Sloppy Joe & a soda :)
Let us know how it turns out!!
...and lump is fantastic! I prefer GFS Lump since it has several large pieces. Just be careful when using your one-touch sweeps as it could bend the sweeps if you sweep to vigorously!
Gettin there. stalled out around 167.. bringing the temps up a little to 275ish.. moving back up again. Hoping to get there within another couple of hours. Mopping every 2 hours. Looking GOOD.
Quote from: james1787 on April 13, 2018, 02:11:08 PM
Gettin there. stalled out around 167.. bringing the temps up a little to 275ish.. moving back up again. Hoping to get there within another couple of hours. Mopping every 2 hours. Looking GOOD.
Sounds like you know what you're doing and this first cook is going well! Looking forward to the results.
Still trying to get out of this stall. I got it up to 176 internal temps.. pit started dropping. It was mop time.. mopped.. added more charcoal... losing all my progress for internal temps. Trying to get to that 195 but I feel stuck. Any ideas how to get out of this stall? I'm half tempted to dump 1/2 a load of hot charcoal heated up in the chimney. What will help get this pork shoulder to the finish line?
Pushing through it.. bumped the temps up a little.. up in the 280-290 range. Temps around 186. Shooting for 195. 12 hours since it first hit the grate.
Yep, you're through the stall. Now to just let it coast on up some more.
Stop opening your kettle and mop it less often would be my suggestion.
Yup, I was only opening it once every two hours. I opened it for one last time (hopefully) to add a little charcoal.. hopefully in the home stretch now. Hopefully in the next couple hours I'll find out how it came out!
Mopping frequently is definitely adding quite a bit of time to your cook. My first shoulder I sprayed with apple juice/vinegar frequently and it definitely extended my cook time.
Sent from my iPhone using Tapatalk
What is this mopping??
And I would suggest cutting your 8lb butt in half next time. It saves fuel, and time, AND adds more bark. I've done 8lb of butt in 5 hours at 230f and if I snake it, I never have to open the lid once. I never encounter this temp stall either.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Quote from: james1787 on April 13, 2018, 08:32:52 AM
Ahhh good to know.. I didn't realize meat hits a stalling temp for a while. You learn something new every day! Next time you're in NJ.. let me know. We'll grab a Sloppy Joe & a soda :)
Most definitely on the Joes! Looking forward to hearing about the butt. Stalls are common...I've even had a double stall once on a brisket. Wrapping in foil helps, but some don't like to do that b/c it can soften the bark. Either way, no worries. Each cook will bring experience and confidence. Enjoy!
Sent from my LG-TP260 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
13 hours was the total cook time. I did wind up bringing the temps up a bit to push it through the stall.
It came out pretty well. The flavor was delicious. It was a touch dry but not too bad. I'm wondering if it was because I pushed it by raising the temps a little? I did have it around 300 - 305 towards the end. All in all though I'd call it a success for a first try but I think I need some more practice.
Still some more learning to do on the pork shoulder cook but it was worth the effort. Thanks everyone for the advice and tips.
Quote from: james1787 on April 14, 2018, 06:59:46 AM
13 hours was the total cook time. I did wind up bringing the temps up a bit to push it through the stall.
It came out pretty well. The flavor was delicious. It was a touch dry but not too bad. I'm wondering if it was because I pushed it by raising the temps a little? I did have it around 300 - 305 towards the end. All in all though I'd call it a success for a first try but I think I need some more practice.
Still some more learning to do on the pork shoulder cook but it was worth the effort. Thanks everyone for the advice and tips.
Try this recipe and process next time. Worked well for me. The guy cooks on a kettle.
http://www.slapyodaddybbq.com/2012/04/slap-yo-daddy-bone-in-pork-butt-2/
Sent from my LG-TP260 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Cool! I'll definitely try this next time. It's hard to find time for these longer cooks but they are worth it. I've bookmarked the site so I'll give it a shot next go around.
I have a fair amount of unburned charcoal from this last round.. gonna round it up.. clean out the grill and cook something this week.. not sure yet what.