Weber Kettle Club Forums

Grill Talk => Weber Mods, Tables and Customs => Topic started by: Neil_VT00 on February 03, 2018, 09:38:36 AM

Title: Resto-mod Outrider
Post by: Neil_VT00 on February 03, 2018, 09:38:36 AM
After I saw @Rub 's Jumbo Joe restore I knew what I wanted to do with my outrider.  The grill started like this:

(http://pics.weberkettleclub.com/images/2018/01/03/00303_cTiL5G5DzNA_1200x900.md.jpg) (http://pics.weberkettleclub.com/image/f1C)

I stripped it down and cleaned it really well. Then the legs and lid bale went to powdercoat to get a coat of textured black.  The vents were all left bare and polished. 
(http://pics.weberkettleclub.com/images/2018/02/03/Outrider_1.md.jpg) (http://pics.weberkettleclub.com/image/faq)
(http://pics.weberkettleclub.com/images/2018/02/03/Outrider_2.md.jpg) (http://pics.weberkettleclub.com/image/fal)

Handle looks like crap, but it's too cold to paint it right now.  Otherwise, I might have to see if @zavod44 can come up with something cool for it.


Title: Re: Resto-mod Outrider
Post by: MacEggs on February 03, 2018, 09:46:10 AM

That looks cool!  And, yes, you are correct about the handle ...  ;D ;) ;)
I'm sure Zav can come up with something.

Was high temperature paint used for the lid bale and legs??
Just wondering as the areas that are close or touching the bowl could be susceptible to peeling and such when exposed to heat.
Whichever happens, it helps clear-up any former rust issues.
Title: Re: Resto-mod Outrider
Post by: Neil_VT00 on February 03, 2018, 09:50:46 AM
@MacEggs Legs and lid bale are all powdercoated.  I also used fiber washers on the legs to isolate them a little.
Title: Re: Resto-mod Outrider
Post by: JEBIV on February 03, 2018, 09:54:20 AM
Very nice resto/mod
Title: Re: Resto-mod Outrider
Post by: mhiszem on February 03, 2018, 10:05:28 AM
Nice restoration!


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Resto-mod Outrider
Post by: Kneab on February 03, 2018, 10:29:28 AM
That looks great.
I just grabbed one of Brian's handles for my Jumbo.
It sits a touch higher than the plastic.
Bale locks nice and tight.
Much quieter when carrying without the lid being loose.

(https://uploads.tapatalk-cdn.com/20180203/1b520abdf79881b0da12b4a633e97b38.jpg)
Title: Re: Resto-mod Outrider
Post by: Neil_VT00 on February 03, 2018, 10:46:17 AM
I'm sure it will end up with a handle like yours @kneab, just need to figure what wood.


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Resto-mod Outrider
Post by: MacEggs on February 03, 2018, 10:51:14 AM
Quote from: Neil_VT00 on February 03, 2018, 10:46:17 AMI'm sure it will end up with a handle like yours @Kneab, just need to figure what wood.

Comes down to personal preference. 
My all-time favourite wood is .... mahogany.  That's what is on my Outrider.  Looks so classy.  :D


(http://pics.weberkettleclub.com/images/2017/12/09/IMG_4284.jpg)
Title: Re: Resto-mod Outrider
Post by: CatskillSmoker on February 03, 2018, 12:57:31 PM
Nice job Neil. I like Brian's handles for these. Guess I need three to start with the Outriders.
Title: Re: Resto-mod Outrider
Post by: namtrag on February 03, 2018, 05:46:17 PM
That looks so great, Neil


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Resto-mod Outrider
Post by: zavod44 on February 04, 2018, 06:52:49 AM
I can help you and I have some finished on hand..... Or we can do something more custom

Sent from my XT1650 using Tapatalk

Title: Re: Resto-mod Outrider
Post by: DellJones on February 04, 2018, 10:44:49 AM

Quote from: zavod44 on February 04, 2018, 06:52:49 AM
I can help you and I have some finished on hand..... Or we can do something more custom

Sent from my XT1650 using Tapatalk
I'd like to get one you have finished


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Resto-mod Outrider
Post by: DellJones on February 04, 2018, 10:46:05 AM

Quote from: Kneab on February 03, 2018, 10:29:28 AM
That looks great.
I just grabbed one of Brian's handles for my Jumbo.
It sits a touch higher than the plastic.
Bale locks nice and tight.
Much quieter when carrying without the lid being loose.

(https://uploads.tapatalk-cdn.com/20180203/1b520abdf79881b0da12b4a633e97b38.jpg)
Nice 🏾🏾


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Resto-mod Outrider
Post by: Neil_VT00 on May 18, 2018, 05:07:02 AM
My outrider got it's new hardware today. Love the new Ebony handle from Brian.  The pictures don't do the grill or the handle justice. This is definitely one of my favorites!

(http://pics.weberkettleclub.com/images/2018/05/18/Restored_1.jpg)
(http://pics.weberkettleclub.com/images/2018/05/18/Restored_2.jpg)
(http://pics.weberkettleclub.com/images/2018/05/18/Restored_3.jpg)
Title: Re: Resto-mod Outrider
Post by: Mr.CPHo on May 18, 2018, 05:36:41 AM
Very cool handle on that resto-modded Outrider!


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Resto-mod Outrider
Post by: addicted-to-smoke on May 18, 2018, 05:59:24 AM
Sweet!

<cough> now, just need ebony lid damper handle <cough>

:)
Title: Re: Resto-mod Outrider
Post by: Firemunkee on May 18, 2018, 07:48:10 PM
Looks great!!

Quote from: addicted-to-smoke on May 18, 2018, 05:59:24 AM
Sweet!

<cough> now, just need ebony lid damper handle <cough>

:)
I second this lol

Sent from my Nexus 5X using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Resto-mod Outrider
Post by: Rub on May 18, 2018, 07:59:06 PM
Sharp looking 'rider Neil!


Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Resto-mod Outrider
Post by: greenweb on May 19, 2018, 05:43:50 AM
Looks great!