Here it is just finished :
(http://pics.weberkettleclub.com/images/2017/10/25/1EF921E8-2D8D-4948-A9EE-91847DD1294C.md.jpg) (http://pics.weberkettleclub.com/image/WCS)
(http://pics.weberkettleclub.com/images/2017/10/25/93E380D8-274C-4833-86FB-0C461E0DF802.md.jpg) (http://pics.weberkettleclub.com/image/WCW)
(http://pics.weberkettleclub.com/images/2017/10/25/5EF5414F-8B05-4875-8877-25033DBF06F3.md.jpg) (http://pics.weberkettleclub.com/image/WCP)
Not as shiny for sure :) but who cares it will only hold charcoal :)
Hope to test it next week end ...
Do you see the picture ? It does not show in my browser ... i did copy past as explained in the forum share link.
Quote from: The_Masteres on October 25, 2017, 12:37:39 PM
Do you see the picture ? It does not show in my browser ... i did copy past as explained in the forum share link.
I see only 1 picture of the finished slow n sear
Sent from my iPhone using Tapatalk
Dob't use photobucket. They now want $300/yr or something to hot link images, and the service still sucks.
We are fortunate to have our own image hosting here at the WKC. Create a new account here -> http://pics.weberkettleclub.com
Choose any username you want; it's not tied into your forum account.
Quote from: addicted-to-smoke on October 25, 2017, 12:49:41 PM
Dob't use photobucket. They now want $300/yr or something to hot link images, and the service still sucks.
We are fortunate to have our own image hosting here at the WKC. Create a new account here -> http://pics.weberkettleclub.com
Choose any username you want; it's not tied into your forum account.
Thanks ! I'll do that :)
Quote from: The_Masteres on October 25, 2017, 12:55:06 PM
Quote from: addicted-to-smoke on October 25, 2017, 12:49:41 PM
Dob't use photobucket. They now want $300/yr or something to hot link images, and the service still sucks.
We are fortunate to have our own image hosting here at the WKC. Create a new account here -> http://pics.weberkettleclub.com
Choose any username you want; it's not tied into your forum account.
Thanks ! I'll do that :)
I don't know how you see the pictures now but it apears in a very big format in my browser ... Let me know if its ok :)
Quote from: The_Masteres on October 25, 2017, 01:02:54 PM
I don't know how you see the pictures now but it apears in a very big format in my browser ... Let me know if its ok :)
However you see them, is however
we'd see them at any given point in time. So just refresh the page if unsure. For example, as I type this you still have one photobucket image in your post. The other two are rendering just fine, not too large, with links back to originals.
Thx, done.
I made it bigger in order to hold more charcoal and water and hopefully last for very long cooks.
holy moses
that looks intense!!
how long did it take you?
Is it working well?
Nice job getting the proper kettle slope into the shape, also!
Quote from: addicted-to-smoke on October 25, 2017, 05:20:05 PM
Nice job getting the proper kettle slope into the shape, also!
I was thinking the same thing, that's a tricky curve to figure out! Awesome!
Sent from my SM-G930V using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Thx guys :) I did my best to make it as close to the original as possible,. Its is made of galvanized steel to avoid rust, and the piece is quiet heavy.
I did not try it yet, but plan on doing a first test without meat to train/check the temperture controle first, maybe on saturday. I'll let you know how it goes.
Is galvanized steel safe ? Always heard it wasn't at high heat ? Good job on the mod.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Quote from: wessonjb on October 26, 2017, 03:35:47 AM
Is galvanized steel safe ? Always heard it wasn't at high heat ? Good job on the mod.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Many thanks for your comment ! To be honest I am not sure if it is "galvanized", the metal supplier told me it will not rust and that it is the metal used to make bread ovens so I concluded it was galvanized metal which I was not aware of the dangerousity ... I need to investigate this issue seriously before cooking anything in it :)
Please do. Galvanized has zinc which makes a toxic fume. This is what I've always been told.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Quote from: wessonjb on October 26, 2017, 04:48:03 AM
Please do. Galvanized has zinc which makes a toxic fume. This is what I've always been told.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I will for sure, thx for saving my life :)
Great job
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Quote from: wessonjb on October 26, 2017, 04:48:03 AM
Please do. Galvanized has zinc which makes a toxic fume. This is what I've always been told.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
So the steel supplier told me there was nothing to worry about as the steel was used to make bread ovens and that the coating migh only transorm to gas under very high heat superior to 1500 degrees F.
I have read a lot since yesterday about this issue, and while there seem to be many point of views and I did not find any serious study confirming the dangerousity of galvanized steel when heated under 1500 degrees F, I have however decided to apply to it a special treatment in order to avoid any risk that is :
1/Light fire inside the SNS with coals and wood on open air as I have read that the galvanized coating is adversely affected by exposure to fire.
(http://pics.weberkettleclub.com/images/2017/10/27/IMG_6335.md.jpg) (http://pics.weberkettleclub.com/image/WC5)
2 / Apply a Muriatic Acid bath/dip to remove all the galvanization followed by baking soda bath/dip to kill any leftover acid.
Link to a video demonstrating this process :
https://www.youtube.com/watch?v=8Tld3onsUVE&t=321s
Quote from: The_Masteres on October 27, 2017, 02:33:19 AM
Quote from: wessonjb on October 26, 2017, 04:48:03 AM
Please do. Galvanized has zinc which makes a toxic fume. This is what I've always been told.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
So the steel supplier told me there was nothing to worry about as the steel was used to make bread ovens and that the coating migh only transorm to gas under very high heat superior to 1500 degrees F.
I have read a lot since yesterday about this issue, and while there seem to be many point of views and I did not find any serious study confirming the dangerousity of galvanized steel when heated under 1500 degrees F, I have however decided to apply to it a special treatment in order to avoid any risk that is :
1/Light fire inside the SNS with coals and wood on open air as I have read that the galvanized coating is adversely affected by exposure to fire.
(http://pics.weberkettleclub.com/images/2017/10/27/IMG_6335.md.jpg) (http://pics.weberkettleclub.com/image/WC5)
2 / Apply a Muriatic Acid bath/dip to remove all the galvanization followed by baking soda bath/dip to kill any leftover acid.
Link to a video demonstrating this process :
https://www.youtube.com/watch?v=8Tld3onsUVE&t=321s
Good deal ! Like I said earlier, what I was always told and didn't want anyone to get sick . Better to be safe than sorry . Good luck and post some pics with it in action
Sent from my iPhone using Tapatalk
Quote from: wessonjb on October 26, 2017, 04:48:03 AM
Please do. Galvanized has zinc which makes a toxic fume. This is what I've always been told.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
You are correct in that you do not want galvanized anywhere in your cooker. I googled on this topic several weeks back and got a lot of hits. The DIY is awesome but i thought i saw galvanized metal in the pics too.
Thumbs up for the DIY to the OP. A word of caution on galvanized, though!
Here is the result after removal of the galvanisation:
(http://pics.weberkettleclub.com/images/2017/10/28/8116669F-668C-4F72-B759-3426B11EE5D8.md.jpg) (http://pics.weberkettleclub.com/image/WCe)
Pretty happy and ready to cook ;D
Awesome work. The things we do.
Not even supposed to weld galvanized metal as it can seriously make you sick from fume coming off the process. Reg. steel plates are cheap. Why risk it.
Up to you if you want to use it, but if it were me I would start all over with a safe metal. Just not worth a health risk even after acid treatment and burning. http://smokingmeatforums.com/index.php?threads/rendering-galvanized-metal-harmless.72991/
http://www.texasbbqforum.com/viewtopic.php?t=5990
it is easier to just buy an SNS or use cheap weber charcoal baskets. You can also split your grill at any section with the weber charcoal rails and fill one side with charcoal.
Quote from: greenweb on October 29, 2017, 12:53:01 PM
Not even supposed to weld galvanized metal as it can seriously make you sick from fume coming off the process. Reg. steel plates are cheap. Why risk it.
Up to you if you want to use it, but if it were me I would start all over with a safe metal. Just not worth a health risk even after acid treatment and burning. http://smokingmeatforums.com/index.php?threads/rendering-galvanized-metal-harmless.72991/
http://www.texasbbqforum.com/viewtopic.php?t=5990
Fortunately I used a welding mask with respirator, and did it outside in a well ventilated area.
As regards the galvanization, it is very thin "shiny coating", and considering the time I let it soak in muriatic acid (Three hours) and the amount of pure acid used, I am pretty convinced there nothing left, and I plan on doing it again a second time and scrub with a wire brush.
Before:
(http://pics.weberkettleclub.com/images/2017/10/31/galvanised.md.jpg) (http://pics.weberkettleclub.com/image/WKC)
After:
(http://pics.weberkettleclub.com/images/2017/10/31/degalvanised.md.jpg) (http://pics.weberkettleclub.com/image/WKK)
You can easily see that there is no more shiny coating.
Quote from: BBQ Jack on October 29, 2017, 01:33:02 PM
it is easier to just buy an SNS or use cheap weber charcoal baskets. You can also split your grill at any section with the weber charcoal rails and fill one side with charcoal.
The SNS is not available/distributed in Morocco. I have read so much good reviews about it that I wanted to try it instead of the other methods you refer to.
galvanized platings will in fact make toxic fumes but the zinc coating very easily dissolves in diluted HCl (i.e., pool acid or muriatic acid) in case you inadvertently used a galvanized steel component. Lots of people mix up galvanized coating s with aluminized coatings on steel. Aluminized steel is commonly used in things like exhaust systems to prevent corrosion of the steel, but aluminized sheet steel is not a common item at most generic metal supply places. Based on appearance and performance I suspect the common charcoal chimneys are made of aluminized steel but I'm not certain
the biggest vulnerability of bare steel in thin gauge will be that it will oxidize at high temperature. You can expect non-protective oxide to form if heated to a temperature where it starts to look even marginally reddish. Stainless steel will be resistant to temperatures several hundred degrees F hotter, but stainless is also a mother to drill holes in and costs a lot more per pound
if your metal supplier said the material was used for bread ovens and was good to 1500 deg F then it was most likely aluminized. Aluminum coatings on steel are good to about that temperature. Like galvanizing, they are also easily removed by HCl.
@BillA from CA , Weber's chimneys and (current) charcoal baskets are aluminized steel.
I *think* the rest of the non-porcelain steel metals are just aluminum? (One Touch sweeps/blades, ash pans and ash catchers)
The one touch sweeps sweeps are aluminized steel, they did make them out of stainless on certain models for awhile. I have a gen 2 performer with stainless sweeps and a otg with stainless sweeps.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Man this SLS is really good ! I never got it out of the kettle since I put it in, cooks almost everything and saves a lot of Charcoal.
Before each new cook I only have to shake it to remove the ash, and add lit charco to the remaining one from previous cook (Lots).