I stopped in at an old hardware store about 2 miles from the Weber Factory today. I hoped to find wicks for my Weber Tikis. Instead I found a NOS 8 inch wheel with hubcap. While wandering around the store I spotted something else. It looked like the bottom for a Smokey Joe silver but with leg sockets like a regular kettle. I asked the lady working there about it she said it was not for sale. It was her father's and that she had brought it in to show her rep from Weber. It had a j code on the lower vent.(https://uploads.tapatalk-cdn.com/20171016/75c6acbde8cca6ae880419afd76874cf.jpg)
It also had a six position cast iron plate that sat on the lip of the grill. There's a small cast-iron crock that sits in the hole in the center. It has never been used and she believes it was purchased from the factory at one of their closeout sales. Anyone have any ideas on what it is?(https://uploads.tapatalk-cdn.com/20171016/d607550050b27dcf34968695aa45a737.jpg)
(https://uploads.tapatalk-cdn.com/20171016/09113aaeb882cd08f2b70598313cbc77.jpg)
That's pretty cool. I have no idea what it is but fondue's were popular in the 80's. Maybe something along those lines.
Sent from my SM-G930V using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
oh my, what could that be? i like the fondue kettle idea.
Maybe it's the one with 3 legs and no triangle I forgot what it's called, the wanderer or something
Traveler ?
Sent from my iPad using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Strange J Code. Seems late for a Traveler? Was it a 14" or 18". Guessing 18 based on the 4 hole vent.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
It seemed like it was a 14"
But with leg sockets.
It also had a six position cast iron plate that sat on the lip of the grill. There's a small cast-iron crock that sits in the hole in the center. It has never been used and she believes it was purchased from the factory at one of their closeout sales. Anyone have any ideas on what it is?(https://uploads.tapatalk-cdn.com/20171016/d607550050b27dcf34968695aa45a737.jpg)
(https://uploads.tapatalk-cdn.com/20171016/09113aaeb882cd08f2b70598313cbc77.jpg)
[/quote]
I have one of the fondue attachment(if that's what it actually is). I was told the same story that they were sold at the factory sale quite some time ago. I've never seen another and wasn't quite sure what to make of it until now. I don't believe it has weber markings anywhere on it.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
LoL ! I know what that monster is !
What do I win ?
That is a Weber Gourmet Set !
I am guessing this was a Euro item but I have never seen it before here.
If you like eating chiefs snacks then this is for you!
3 hours of cooking time with family members you hate to get the same equivalent of 1 hamburger :-(
Here is a photo of how it works:
(https://uploads.tapatalk-cdn.com/20171017/e81e8c0f01e2997e7b4d14f876ba2cd5.jpg)
Some types have 2 levels to cook on.. that makes it a combo grill / gourmet set... like this:
(https://uploads.tapatalk-cdn.com/20171017/4ddd5a131fd08a388fbc014991d96599.jpg)
It's the start of the holiday season here in The Netherlands so the stores start selling pre-made packs of mini meat for these... anyone game for a big plate of cross-contamination ?
(https://uploads.tapatalk-cdn.com/20171017/61694a804eb5f5c708b7a09e328a034f.jpg)
Google translated from Dutch ..
Gourmets are a phenomenon that has probably been swept from Asia. It's an activity where a group of people cooks on a table in small pans or on a grill, griddle or similar, always cooking their own dish using different ingredients which is on the table, which is eaten, after which you can cook something new. It is similar to rock grills and raclette, but raclets are made with cheese and it is typically Swiss; while gourmets use meat, fish and / or vegetables. An additional possibility is baking small omelettes or pancakes. The whole is often dressed with different sauces and baguette.
One usually gourmet with more people, usually four to six. The traditional gourmets are on fire with small spirits burned under the tiles. Today, more and more electric gourmet dishes are in use, usually consisting of 4 to 6 pans that are heated electrically from below. There are also variants with wok pans in circulation. Gourmets are slightly different from grilling or grilling with the pans under a griddle (metal or stone). Because of this, the panes are heated by a spiral from above, which involves grilling and not the traditional gourmets. Some people do not like gourmets because it takes a very long time, it's hard to get your ingredients to their fullest value and because of the odor barrier. Others find it a nice way of eating, where the host or woman does not have to leave the table. Gourmets has been a Christmas tradition in the Netherlands for some time now.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Are you sure? Even without the food holders the bottom part (what he saw) looks different. And where is this type of Weber accessory online?
Looks like little grease cups... Dunno.. Hmmmm
Fondue or something with skewers seems likely given these indentations here. Strange that there are only 4 slots yet 6 separate "serving areas".
[attachment deleted by admin]
What
@vwengguy said seems like a reasonable guess and somewhat similar looking things he's aware of that are used for this purpose.
Although not pictured,
@Kneab said "[t]here's a small cast-iron crock that sits in the hole in the center."
I'd bet the outer crock walls have 4 tabs that fit in the 4 slots and the 4 slots are NOT used for holding fondue forks (as the handles would likely wind up resting on the hot griddle, which makes no sense from a design perspective).
The grease cups on the end make sense for what
@vwengguy guessed as you would probably want any grease to go somewhere. Also the separate cooking areas keep the grease (or sauce) from the food in one section from going on foods in another section and affecting the taste.
To me, the small cast iron crock in the center might be used for fondue but that still doesn't explain the griddle. With a fondue, it is my understanding that eat each piece as it is cooked as opposed to cooking a bunch and putting them on a hot griddle to keep them warm AND further cook them.
My guess is that our European friend is correct and that it's a "gourmet" or "chief snacks" thing that includes a crock that could be used like a fondue or for cooking something more liquid, like soups or something else where you would want a crock.
I'm going to go out on a limb here and I think there is something missing that drops into the middle hole and that lets the heat come up in the center maybe to a upper griddle ? Kind of like the 2nd photo I posted. I am assuming that this would have 4 pins or knubbies that fit into the matching notches around the ring... to keep it from turning? I don't know I'm just guessing.
For all I know it could be a billings induction coupling for use with a photon impeller on the warp drive? and its just sitting next to a weird ass barbecue prototype ? ... I need another drink !
@PotsieWeber European Friend.. Where? Not ME! I'm born and raised in Michigan... I just live here now and as soon as I can sell my house... I'm coming back home so I can go Kettle Hunting ! LOL ;-)
Quote from: vwengguy on October 17, 2017, 10:31:00 AM
I'm going to go out on a limb here and I think there is something missing that drops into the middle hole and that lets the heat come up in the center maybe to a upper griddle ? Kind of like the 2nd photo I posted.
There is a bowl that fits in the circular opening made of the same heavy material as the rest of it.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Ja, a missing bowl still fits with my idea.. with gourmet here in Holland they always have a bottle of "fake butter" type cooking oil on the table to cook with or fry veggies or meat in.
Did you get a photo of the little pot ?
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Watch out, if you are there long enough, you'll wind up with an accent and nobody will believe you are NOT European.
Quote from: vwengguy on October 17, 2017, 10:31:00 AM
I'm going to go out on a limb here and I think there is something missing that drops into the middle hole and that lets the heat come up in the center maybe to a upper griddle ? Kind of like the 2nd photo I posted. I am assuming that this would have 4 pins or knubbies that fit into the matching notches around the ring... to keep it from turning? I don't know I'm just guessing.
For all I know it could be a billings induction coupling for use with a photon impeller on the warp drive? and its just sitting next to a weird ass barbecue prototype ? ... I need another drink !
@PotsieWeber European Friend.. Where? Not ME! I'm born and raised in Michigan... I just live here now and as soon as I can sell my house... I'm coming back home so I can go Kettle Hunting ! LOL ;-)
@MDurso, care to weigh in on this mystery?
I'm still curious.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Well I do know I have not seen this before. So it wasn't anything laying on the shelves in 2006 or there abouts. We also know that Weber moved several times -Arlington Heights, Wood Dale, Palatine, Huntley. I'm not sure where R&D moved to these days, I don't keep tabs on them... so a lot was shuffled around in all those moves.
They did have Factory Closeout sales each year in the summer up until 2004/5. They discontinued them in 2006 from what I was told -they didn't have one in 06 when I started. They would sell off unique items, limited edition stuff, open box -so you may have that cast piece without the rest of the parts.
We actually have 2 things here. One is the unique bowl with the vent on the bottom, the same ones I used on the 22. Someone who is at home (as I am at work right now) should be able to judge that diameter with a 14 and 18 they have laying around to determine the bowl size. Because they are awfully close to the leg couplings, right? If it had stubbys or full length triangle, good question -which again, was it a 14 or 18.
But given the large cast piece, an 18? I suspect those ridges are on the underside and rest on the edge of the bowl. Whether or not there are other accoutrements, good question.
I have a source I can reach out to and i'll let you know what they say. Cool find!
The hardware store I spotted this at is about a 2 miles from the factory in Palatine. The bowl is from a 14-inch Smokey Joe but it has leg sockets. The vent code says it's an 88. I need to stop back in and see if the owner of it has found anything out from the Weber rep.
I have heard from a source very close to this. They said it should not have been sold and was likely a dumpster dive find. Not completely unlikely as they are not too far from where Weber R&D was located.
Scale looks like a 14" based on the picts. The three mounts on the underside of the CI look to support the 14" scale and would lock this tray onto the top of a 14" bowl.
(https://uploads.tapatalk-cdn.com/20171107/971a9beac3a6b17c7762445bcba43748.jpg)
Sockets make sense as well. I doubt normal 14" SJ legs from the 80's would support the weight of that CI vey well.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I don't know what this is, but I like it!