I've been cleaning up a 91 OT+ and have not been able to make progress cleaning the rust stains around the lid handle. I've been using a razor scraper, steel wool, and dish soap. Anyone had luck cleaning this type of stain??
Should I try CLR or barkeepers friend? If the later, powder or liquid format?
Thanks!
(https://uploads.tapatalk-cdn.com/20170613/d8b94d7b89a6786e11eed5f64b48fb42.jpg)
Quote from: Neil_VT00 on June 13, 2017, 10:30:59 AM
I've been cleaning up a 91 OT+ and have not been able to make progress cleaning the rust stains around the lid handle. I've been using a razor scraper, steel wool, and dish soap. Anyone had luck cleaning this type of stain??
Should I try CLR or barkeepers friend? If the later, powder or liquid format?
Thanks!
(https://uploads.tapatalk-cdn.com/20170613/d8b94d7b89a6786e11eed5f64b48fb42.jpg)
Wanna know too!
Three yo Performer with the same thing.
Made me sick when it first appeared.
Sent from my XT1650 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
You could try squirting, dabbing or whatever some evaporust on there. May take a few applications since it won't be submerged.
Sent from my VS987 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Go grab a bottle of navel jelly and leave it on there for 24 hrs, wash it off, oil it up. I had to do this to an outrider I got cheap, every hole had rust and rust stains and the navel jelly took care of both.
Sent from my SM-J700P using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I was in the grocery store and they had powdered barkeeper's friend. Tried that mixed with a little water on a sponge. It worked wonders. Here are the results:
(https://uploads.tapatalk-cdn.com/20170615/083d1bbf0ca0312d3a6e77823771282f.jpg)
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Great Neil ! Good to know , got to get some.
That's a pretty green and handle. Nice work!
Thanks
@Craig. The kettle is an N-Code so the handle didn't come with it.
@cwestsmokin and anyone else contemplating barkeeper's friend. Use it with care... http://weberkettleclub.com/forums/weber-kettles-accessories/help-barkeepers-friend-left-a-stain/
There is some stuff (rust nutrilizer) that really works incredibly well. I don't know the brand. You can find it at Napa I bet.
You can take a ear swab and dab as little on all effected areas. It nutrilizes the rust stopping it in its tracks. It's not paint but acts like as primer.
Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I use barkeeeper's friend in powder form, make a paste of it, and place it on the rust for a minute or two then rinse or wipe it off. Repeat as needed. Don't rub it in as it's mildly abrasive and can dull your kettle.