Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: CatskillSmoker on June 04, 2017, 05:06:44 AM

Title: Thermometer replacement on Performer Gen 2
Post by: CatskillSmoker on June 04, 2017, 05:06:44 AM
Does it just pull out?
Do you guys clean the probe?
Don't think it's accurate.
Maybe just needs to be cleaned?
Thanks in advance for any wisdom.
Title: Re: Thermometer replacement on Performer Gen 2
Post by: Jason on June 04, 2017, 06:45:18 AM
Yes, they just slide out. You might need to rotate it a bit as you remove it. I have have/had several of these. The one on my Red SSP is very accurate. I have tested others that were nowhere near accurate. 
Title: Re: Thermometer replacement on Performer Gen 2
Post by: Craig on June 04, 2017, 06:59:33 AM
It's funny because the one on my Red Master Touch and Red Genesis are pretty spot on... My Blue Master Touch one, not so much.. I am thinking of investing in the Tel-Tru dial therm that easily fits in one of the lid vent holes for my MBH/non therm equipped kettles. Similar to the set up that I have seen @Jim Lampe use.
Title: Thermometer replacement on Performer Gen 2
Post by: UserGone on June 04, 2017, 07:06:28 AM
I read They were designed as a dual purpose.  You can pull it out of lid and stick in the meat to check internal temp.


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Thermometer replacement on Performer Gen 2
Post by: Jim Lampe on June 04, 2017, 08:09:30 AM
Quote from: Craig on June 04, 2017, 06:59:33 AM
It's funny because the one on my Red Master Touch and Red Genesis are pretty spot on... My Blue Master Touch one, not so much.. I am thinking of investing in the Tel-Tru dial therm that easily fits in one of the lid vent holes for my MBH/non therm equipped kettles. Similar to the set up that I have seen @Jim Lampe use.
Craig, are you referring to this set-up?

(https://lh3.googleusercontent.com/P-jVAfKvTJYIAm9UuEQ2MWBMxrH-7aCR6QXJX7c5fVnK_k6qXvFAufguboP6vgjUR6wGqVwpa4QsiQczDHh8PG8khF2TCUr0kEvL8xyW83m1IK0ZlIYBHaHKbOaxCIf8K8DtXHJeUCyqK_zNirg-MlScVFHncXTyIGMqH8ax4gh5Tsy_Diskj7NtvK9buDY0MFnERHciliRIcZdL8yf6bc0ceknZ1s5rrVeVg0k5GaiffGrIVpUpnsW7l8GQRVgsfsUUd6WLSPCORuFDD7ddNcMzvKCIeVULWvD4MPCrqrv9to1tyFGdpzmhr5-3Jk79dX4LXo2r847Iwb7noyQQyam49LRGnkmVZPBoMflQqMdFez7hnmcq2y3wkhhu7zsrtbMdLDXAei--_ep2g7ziDYAtQNTvC_3RsWzKyxGanX6WEmyXBMrBXm8649UZZqWQZrWFfT-zcEGRP1tsddgYn5zEqMU42kdJYTtex7zXRfoLxwokeM-DG5sn_OyHKV6dSXjfqcAhW_7-xcZ3NWHHUT-x9RhBrJE685T0V1N3Szx0wwU_EztxAEAQOqHox49G_YAFC9I33eBVxB37aKaCo3sRVTh3KDBuRX79VlMpvIUy6SA7Eyy5QQ=w824-h618-no)
(https://lh3.googleusercontent.com/5EnkG9pSERkPz9oFiCBMwnJ_2Qxoz_tYbv6_5YbSUSQfcSDDDhAd6jPOGrguntm5eDMUL_pxccpqT1V3caszbHycotDdB3Fn7C4ApWjDCt6RPV_Y0frGUZ1EPrJTQH3CESJsTkJFsqEsZUyzSfneRt2rM5k_xgOoTPaL6PL01Oc16kbsyp_jysyuyRvXpBYvo5ujI85gpk0LXRB3uSxmHqhbDUR8DBGvLbugNlQdqw-ZCmJsW90sTzOukvZZDX1J-KRIfcFmvFB6ChtRCWvXNWk9x8mCN4UruMrgQwKD4rYyjndw0uBWzAYdwu7AD4GqhE-VDcu5sFfr-BQjZ1IABxUiBVEz87nCSYhgh-WgcCSF-mX_AVv9B_dEbgW7sKD9Q_ua64aK8MwB2JWeW8CKpPlmBf0J9H169E4InISYLg8meEiT3hy8p-1SW39w8_oE42gjQVGvC8TuxHdiL9jbFIiAkmlxU1byk_NqEhsUNDOC2UF4-DoS6_YY94oOpJ7OvVuEagoZWqddL9us18MXuIY2bLLYmkkSGcm6eeBJkPzGtAcmIg9CoVgOYw4fouFQUFYLVMSthF5kXQZJgVEXRXraD3jL0n_3HlgMFck5W-HK5DvkjuOuaQ=w800-h600-no)
Title: Re: Thermometer replacement on Performer Gen 2
Post by: Craig on June 04, 2017, 08:12:21 AM
Quote from: Jim Lampe on June 04, 2017, 08:09:30 AM
Quote from: Craig on June 04, 2017, 06:59:33 AM
It's funny because the one on my Red Master Touch and Red Genesis are pretty spot on... My Blue Master Touch one, not so much.. I am thinking of investing in the Tel-Tru dial therm that easily fits in one of the lid vent holes for my MBH/non therm equipped kettles. Similar to the set up that I have seen @Jim Lampe use.
Craig, are you referring to this set-up?

(https://lh3.googleusercontent.com/P-jVAfKvTJYIAm9UuEQ2MWBMxrH-7aCR6QXJX7c5fVnK_k6qXvFAufguboP6vgjUR6wGqVwpa4QsiQczDHh8PG8khF2TCUr0kEvL8xyW83m1IK0ZlIYBHaHKbOaxCIf8K8DtXHJeUCyqK_zNirg-MlScVFHncXTyIGMqH8ax4gh5Tsy_Diskj7NtvK9buDY0MFnERHciliRIcZdL8yf6bc0ceknZ1s5rrVeVg0k5GaiffGrIVpUpnsW7l8GQRVgsfsUUd6WLSPCORuFDD7ddNcMzvKCIeVULWvD4MPCrqrv9to1tyFGdpzmhr5-3Jk79dX4LXo2r847Iwb7noyQQyam49LRGnkmVZPBoMflQqMdFez7hnmcq2y3wkhhu7zsrtbMdLDXAei--_ep2g7ziDYAtQNTvC_3RsWzKyxGanX6WEmyXBMrBXm8649UZZqWQZrWFfT-zcEGRP1tsddgYn5zEqMU42kdJYTtex7zXRfoLxwokeM-DG5sn_OyHKV6dSXjfqcAhW_7-xcZ3NWHHUT-x9RhBrJE685T0V1N3Szx0wwU_EztxAEAQOqHox49G_YAFC9I33eBVxB37aKaCo3sRVTh3KDBuRX79VlMpvIUy6SA7Eyy5QQ=w824-h618-no)
(https://lh3.googleusercontent.com/5EnkG9pSERkPz9oFiCBMwnJ_2Qxoz_tYbv6_5YbSUSQfcSDDDhAd6jPOGrguntm5eDMUL_pxccpqT1V3caszbHycotDdB3Fn7C4ApWjDCt6RPV_Y0frGUZ1EPrJTQH3CESJsTkJFsqEsZUyzSfneRt2rM5k_xgOoTPaL6PL01Oc16kbsyp_jysyuyRvXpBYvo5ujI85gpk0LXRB3uSxmHqhbDUR8DBGvLbugNlQdqw-ZCmJsW90sTzOukvZZDX1J-KRIfcFmvFB6ChtRCWvXNWk9x8mCN4UruMrgQwKD4rYyjndw0uBWzAYdwu7AD4GqhE-VDcu5sFfr-BQjZ1IABxUiBVEz87nCSYhgh-WgcCSF-mX_AVv9B_dEbgW7sKD9Q_ua64aK8MwB2JWeW8CKpPlmBf0J9H169E4InISYLg8meEiT3hy8p-1SW39w8_oE42gjQVGvC8TuxHdiL9jbFIiAkmlxU1byk_NqEhsUNDOC2UF4-DoS6_YY94oOpJ7OvVuEagoZWqddL9us18MXuIY2bLLYmkkSGcm6eeBJkPzGtAcmIg9CoVgOYw4fouFQUFYLVMSthF5kXQZJgVEXRXraD3jL0n_3HlgMFck5W-HK5DvkjuOuaQ=w800-h600-no)

@Jim Lampe That's the one! Is that Tel-Tru pretty accurate? Seems to get great reviews. I've been eying that setup for a while now. I figured its non invasive (no having to drill into a vintage cooker) what length of probe is that one?
Title: Re: Thermometer replacement on Performer Gen 2
Post by: Jim Lampe on June 04, 2017, 09:14:08 AM
QuoteThat's the one! Is that Tel-Tru pretty accurate? Seems to get great reviews. I've been eying that setup for a while now. I figured its non invasive (no having to drill into a vintage cooker) what length of probe is that one?
it's only a 2" probe, and without testing it, the accuracy is close enough for me. And I also read all those reviews.... like ThermaWorks, Tel-Tru stands behind their goods.
Title: Re: Thermometer replacement on Performer Gen 2
Post by: Craig on June 04, 2017, 10:33:15 AM
Thanks for the input, Jim. This helps me out a lot. Now I just need to decide which dial style. Regular, black or glow in the dark.
Title: Re: Thermometer replacement on Performer Gen 2
Post by: Jim Lampe on June 04, 2017, 10:40:37 AM
I like the regular red, but then, i'm a Badger fan ;)
Title: Re: Thermometer replacement on Performer Gen 2
Post by: UserGone on June 04, 2017, 11:45:52 AM
I have the blacked out dial for my smoker. You can fine tune them as they have a set screw.
(https://uploads.tapatalk-cdn.com/20170604/167cf7219217b83cb672938009049e33.jpg)


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Thermometer replacement on Performer Gen 2
Post by: Jim Lampe on June 04, 2017, 12:11:56 PM
Black Looks Good Also!
Title: Re: Thermometer replacement on Performer Gen 2
Post by: LiquidOcelot on June 04, 2017, 01:50:30 PM
anyone replace the stock weber one with a better long probe into the oem slot?
Title: Re: Thermometer replacement on Performer Gen 2
Post by: mhiszem on June 04, 2017, 03:13:59 PM
This is the one that is a good replacement for in handle mounting http://www.teltru.com/p-245-weber-genesis-gold-bc-grill-replacement-themometer.aspx (http://www.teltru.com/p-245-weber-genesis-gold-bc-grill-replacement-themometer.aspx)


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)