Weber Kettle Club Forums

I've really enjoyed cooking on kettles over the years, as have many of us here. Once I got my hands on a SS performer, I felt like I had graduated to the next level of grilling and BBQ. Right around that same  time, I also joined this site and got an education on cleaning and tweaking old kettles to get more life out of the.  I wasn't aware there were 26" kettles out there, but once I discovered they existed, I had to have one.

Several years later, I now have several 26ers, each thanks to members here both past and present . I love the versatility they offer.  In my mind, the 26er is the perfectly sized kettle and the best kettle made by Weber. (Of course, I haven't seen a ranch in person yet, but I digress).

Like many of us here in the WKC, I hoped that Weber would heed our cries and produce the "bestest" kettle cooker ever—a Performer with a 26" kettle. Last winter I thought perhaps we had been heard when I saw the teases for a new charcoal cooker. Alas, Weber did create their version of the "bestest" kettle ever, but in a 24" cooking space and at a price that is frankly out of reach for me. With that dream effectively squashed, I went back to improving my cooks and using the numerous kettles in my arsenal.

------

There is something about wafts of pecan wood smoke, a cigar, and brown liquor that taps into my limited creative soul. During one of these D&S sessions, I contemplated what to do with a performer I picked up cheaply that had been stuck on my deck for a year.  I've been flipping grills to offset my charcoal purchases for a few years, but I won't flip damaged goods, so because the lid was really rough, this was a parts piece that was taking up space. Finally, it dawned on me. F Weber, I'll make my own 26" performer. The new style 26'er I also picked up last year already had a bale,  just needed brackets. The 2nd generation performer frame could hold it, if I could simply extend the supports out 4" or so. And off I went....

I found a metal shop in town and had them cut and bend two brackets out of 16ga SS. I used a ball and peen hammer to manipulate the ears so they would conform to the kettle shape and attached them with ¼" SS screws/nuts. I also had them cut and bend two pieces of aluminum diamond plate to serve as the cross-members.


I then sawed the existing plastic cross-members in half and attached them to the ends of the diamond plate cross-members using aluminum rivets. I also massaged the grooves on the rear side of the plastic braces so I could re-use the bottom rack and the bin.  i picked up a 3' piece of 3/8" steel rod at my local home center and cut it down to 33" for use as the axle. I also needed a couple of plastic spacers to allow the wheels to clear the bend in the diamond plate.

It really irritated me how easy this was using basically stock parts and realizing that Weber has essentially flipped us off thus far by not producing a couple of plastic brackets 4" wider than they do today and giving us a 26" performer.

Anyway, enough about that, I had to build a table. My metal shop wanted an arm and a leg to cut a SS table and I didn't want to use the diamond plate up top. I scoured some old posts and saw a beautiful table made by a member @glrasmussen who had helped me out in the past. I reached out to him and he patiently described how he made his table. While me woodworking skills are less than marginal, I figured I'd give it a go. Results were exactly in-line with my skill level, but fully functional.

So, without further ado, here is the OG Performer, finally put together today, 9/1/2016 to kickoff mod month:

(http://i1330.photobucket.com/albums/w579/O_Glenn/P1260695_zpsovgl1szo.jpg)

(http://i1330.photobucket.com/albums/w579/O_Glenn/P1260696_zps5dz1wqln.jpg)

(http://i1330.photobucket.com/albums/w579/O_Glenn/P1260697_zps8suyv1v2.jpg)

(http://i1330.photobucket.com/albums/w579/O_Glenn/P1260700_zpsgyryzqdj.jpg)

(http://i1330.photobucket.com/albums/w579/O_Glenn/P1260698_zpscaddy0fx.jpg)

(http://i1330.photobucket.com/albums/w579/O_Glenn/P1260702_zps6slgxojp.jpg)

(http://i1330.photobucket.com/albums/w579/O_Glenn/P1260703_zpsqmegpwtu.jpg)


I have not added the burner option YET for three reasons: first, I find I use the lighter cubes more than the gas igniter because i tend to forget when I have the igniter on, wasting fuel; and second, I don't want to hasten the failure of the charcoal grate in the 26er. I've noticed many deformed charcoal grates right where the burner is located and since the 26er grates aren't cheap like the 22" grates, I'd rather not see that happen. And finally, the hole for the burner is oddly shaped and I've done enough drilling into a 26er for 2016.  Maybe next year...

That is quite possibly the perfect cooking machine!! Great job!!!

looks great

That ... looks ... incredible .. !!!!  I skipped right to the pics .... Need to go back and read it all later.   :D :D

First day of Mod Month and you set the bar very high! Great job!

Super awesome kick ass mod!


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)

How does anyone top this? You have made a dream machine .. I am still drooling looking at the pics.

No discounting this one bit but there are a lot of talented guys in this club. This mod included. There will be a lot of kick ass mods in this thread. Whish I had a fraction of the talent as Mr. @OGlenn made it look easy but I'd find a way to screw that up real fast.


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)

Omg how did you get into my head that is fing awesome must be why my wife calls me a dreamer not a doe'r I believe in one day you have locked up mod month imo 

Sent from the Weber Searching Phone using Weber Kettle Club mobile app

What did this cost you in time and material? How much could you sell these for


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)

Quote from: kettlebb on September 01, 2016, 02:51:29 PM
... There will be a lot of kick ass mods in this thread....

Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)

I wholeheartedly agree, this group always has had tremendously creative ideas and I can't wait to see what pops up over the next 30 days and beyond. Mod month pushed me to finally finish this and get back to cooking....

That is spot on! Lot of creativity went into making that. Love the wooden table.

Only thing I could make comment on is the bolts for the table.  It would look much sleeker if they were recessed.

Definite contender for the Mod of Month.  Good luck!

Sent a note to the captain to see where this thread needs to live. Might have to move to over to the original thread so we don't lose track of where all the mods are. Where's a mod when you need one?

Quote from: kettlebb on September 01, 2016, 03:00:08 PM
What did this cost you in time and material? How much could you sell these for


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)

Like most projects, too much of both time and material. My metal shop was a ripoff, but I wanted it badly.  table wasn't too bad cost wise, but I'm not used to working with wood, so it took me awhile there.

I wouldn't consider selling, check with my brie when she is a widow...

Like I said, I think the parts could be manufactured fairly easily by Weber.

Quote from: greenweb on September 01, 2016, 03:05:39 PM
That is spot on! Lot of creativity went into making that. Love the wooden table.

Only thing I could make comment on is the bolts for the table.  It would look much sleeker if they were recessed.

I thought long and hard about that and agree that it would look better, but I worried about snow/water settling into the recess and affecting the wood. I actually used a shouldered plastic bushing to raise the screw to help keep water out of that area. This thing will be used and abused enough by me, hoping i can keep damage by mother nature to a minimum.

Looks great. Very nice work!!! And perfect timing


Sent from my iPhone using Tapatalk

(http://uploads.tapatalk-cdn.com/20160902/6d0abda09fe3c7090ea2ccd1dad20cbd.jpg)

Very nice dude!!

Sent from my iPhone using Tapatalk

Boom!

Sent from my SM-G900V using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)

Great idea and awesome job putting it all together! If I got my hands on some of those brackets... 8)

Beautifully done -

@OGlenn , AWESOME! Congrats on a awesome mod!

#jealous. As much as I like the 26 RK Mod, I need a table, you made it happen. Enjoy the memories that bad boy will bring!!! Now sit back and enjoy a Cigar, beverage and the thin blue smoke roll.

(There was the 26 SS Mod, not taking away from that one, that was also an awesome build too.)

Excellent work @OGlenn!  I also thank you for introducing me to the weber kettles craze and a wealth of grilling advice.

Sent from my SM-G900V using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)

Thanks to everyone for the compliments. It's not perfect, but it'll play. Hopefully someone else takes the ball and runs with it.

Quote from: glrasmussen on September 01, 2016, 08:17:31 PM

(There was the 26 SS Mod, not taking away from that one, that was also an awesome build too.)

Greg, Thanks for pointing this out.  This is not even close to being the first 26" performer mod. The RK mod and Stretch SS mod helped me recognize what is possible using mainly Weber materials. That's what makes this community work, folks enjoy sharing freely with others.

Game Over.  You Win.

Please read the rules, prefix your entry with Mod Month -  So I can track them

Awesome. Suddenly feeling the need to find a Gen2 performer. Now.

The bar has been set high. Grate job, @OGlenn !

Awesome build!
What's the diameter of the charcoal grate in a 26"?  I was just thinking about the gas assist.  I would think there would have to be something cheaper and close enough in size to work.

Oh. My. God.

Two words: Kettle Porn.

I'm so envious of people with talent...

Quote from: OGlenn on September 01, 2016, 02:02:39 PMI have not added the burner option YET for three reasons: first, I find I use the lighter cubes more than the gas igniter because i tend to forget when I have the igniter on, wasting fuel; and second, I don't want to hasten the failure of the charcoal grate in the 26er. I've noticed many deformed charcoal grates right where the burner is located and since the 26er grates aren't cheap like the 22" grates, I'd rather not see that happen. And finally, the hole for the burner is oddly shaped and I've done enough drilling into a 26er for 2016.  Maybe next year...

That's interesting to hear about the grates and the gas igniter models.

What a great start to Mod Month 2016! After going through the 2014 and 2015 threads, I am pretty excited to see what this year brings.

Quote from: DarrenC on September 02, 2016, 08:36:23 AM
Oh. My. God.

Two words: Kettle Porn.

I'm so envious of people with talent...

Thanks, but I really don't have any special talent--the metal shop did the cutting and bending of the brackets and a member walked me through his table build. My biggest reason for posting this is to show it isn't that hard to make. Who gives a shit if it ends up perfect or not (mine certainly isn't), just give it a shot!

A very nice execution of a great idea!  I love the fact that the conversion was not that complicated, it was just a matter of getting a few pieces in place to pull it off.  But that table - that really shows some individuality that makes this project all yours! 


Great job!


Winz

 Really nice work!!!  Maybe this will be what Weber needed to get the 26" performer going. 

I don't think they'd do it. It would probably cost $600-$700 retail and I'm guessing they wouldn't have too many buyers. I'd love to have one though


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)

Wow!

Very nice job.  Now we all have a template.

Quote from: kettlebb on September 02, 2016, 01:33:48 PM
I don't think they'd do it. It would probably cost $600-$700 retail and I'm guessing they wouldn't have too many buyers. I'd love to have one though


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)

You didn't hear?  Charcoal grills cost $1500 now!   ;D

Wow, that's incredible, looks beautiful!

bump

Awesome MOD!  I think the coolest part is that it doesn't look as big once it's in the cart.  My GF calls my 26er the UFO since it is so much bigger than my other grills.  Very nice work!!!

Beautiful work man, very well done!

(http://uploads.tapatalk-cdn.com/20160908/0d4ff8d0e64fddb90137f72afde29fb8.jpg)

Great work OGlen.

WTB Original Wood Dale legs, triangle, wheels and legs.Blue SSP,  Blue mbh, Blue Mlh.

That's awesome.  I have always wanted a 26" Performer. 

I'm going to make one of these....

Sent from my Moto Z force Droid

Very cool looking mod! Love the table.

It's been talked about for years and you've finally done it
Absolutely brilliant! And it's gotta be a front runner for mod month