I have a Gen2 Performer with gas assist. I'm talking to a guy who has a beautiful Blue One Touch Platinum. Is it possible to do a bowl swap ? Is it safe to drill out a hole in the Blue for the gas assist pipe ? Is there a way to successfully patch the hole in my current Performer's bowl to use it on the OTP ?
Yes, a bowl swap is straight forward. You can get bolts and a fender washer to seal up the hole. Installing a GA is pretty simple too, just take your time checking the fit and go slow: http://weberkettleclub.com/blog/2014/04/25/weber-grill-mod-adding-gas-assist/
Quote from: pbe gummi bear on July 23, 2015, 03:26:13 PM
Yes, a bowl swap is straight forward. You can get bolts and a fender washer to seal up the hole. Installing a GA is pretty simple too, just take your time checking the fit and go slow: http://weberkettleclub.com/blog/2014/04/25/weber-grill-mod-adding-gas-assist/
Thanks for the link PBE!! Didn't cross my mind that I could order the GA parts from Weber. Now I'd have to decide whether to do the bowl swap and have a Perf w/GA and a OTP, or, do the bowl swap and have a Perf w/GA and a OTP with GA.
Decisions, decisions
I remember this thread that Brian (
@zavod44 ) did:
http://weberkettleclub.com/forums/weber-kettles-accessories/sage-performer/
Why don't you just buy the blue bowl and lid for a performer?
Quote from: zavod44 on July 23, 2015, 05:57:38 PM
Why don't you just buy the blue bowl and lid for a performer?
Because I'm thrifty and frugal, or cheap, depending on how you want to look at it. ;D If I bought a blue bowl and lid, then I'd have an extra bowl and lid just lying around doing nothing.
At least this way, I'd end up with 2 nice and complete grills.