I have been meaning to post these pictures for a while. I still need to clean up the bottom and drill out the hole for the sweeps. Hoping it will all go back together. I have the original legs and wheels that I plan on putting back on at least to make sure everything fits before I replace anything else. Any suggestions are appreciated.
(http://tapatalk.imageshack.com/v2/15/01/07/6d16230deca6e269fffb852e1608cc60.jpg)
Before
(http://tapatalk.imageshack.com/v2/15/01/07/4da4bea9fa3572ce4df7821d99d16f27.jpg)
(http://tapatalk.imageshack.com/v2/15/01/07/af4661d4059e9fa5d1979b8f2ef545dc.jpg)
After we my brother welded a patch plate in place
Sent from my iPhone using Tapatalk
Big difference. It's looking good.
That's a good brother. Keep at it and that baby will be cooking soon. Be sure and add some cook shots when you get to it.
OUCH!
If I convert this to a OTG do you think it will cover most of the repaired area? I know I still need to prime it and make sure the sweeps work properly but it wouldn't have to be as perfect. I just need to buy the ash catcher assembly and the sweeps. Are the stainless sweeps still out there? I need to take a closer look at the triangle and legs.
Great work, so far! That was destined for the scrap metal heap.
Is it an 18"? The older One-Touch 18s had longer intakes.
I converted my P code red 18 to a Gold. The intakes go just a smidge outside of the ash ring. I still converted it. Works great. :D
http://weberkettleclub.com/forums/weber-kettles-accessories/one-touch-vent-size/
Yes, it is an 18. Awesome, that is what I am going to do then. I still have to try to smooth the surface, prime and paint but it won't be as visible. I will take a look at your post also.
Here is the original thread with the full restoration.
http://weberkettleclub.com/forums/weber-kettles-accessories/need-help-advice-guidance-with-this-red-18/
Sadly, the paint I used did not hold up over time. Part of the bowl now looks like this ...
(http://i1142.photobucket.com/albums/n615/MacEggs/IMG_3467.jpg) (http://s1142.photobucket.com/user/MacEggs/media/IMG_3467.jpg.html)
Thanks, I am going to try smoothing the surface with blue magic quiksteel. Then painting with VHT 900 red caliper paint and see how it holds up. I figure there's only one way to find out if it will work.
Sent from my iPhone using Tapatalk
Good luck, thats quite the rescue.
Cook your brother many a meal when you are done!!